• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.3
• /
• pp.157-165
• /
• 2008

In the previous study, the anti-oxidant activity of oxtract/fraction of Sueada aspparagoides(SA) and the stability test for the cream containing SA extract were investigated respectively[1,2]. In this study, the components of SA extract were analyzed by TLC, HPLC, and LC/ESI-MS/MS, $^1H$-NMR. TLC chromatogram of ethyl acetate fraction of SA extract revealed 5 bands $(SA1{\sim}SA5)$. HPLC chromatogram of aglycone fractions obtained from deglycoylation reaction of ethyl acetate fraction showed 2 bands (SAA 2 and SAA 1), which were identified as quercetin (composition ratio, 16.88%) and kaempferol (83.12%) in the order of elution time. Among 5 bands of TLC chromatogram, 4 bands $(SA2{\sim}SA5)$ also were Identified as kaempferol-3-O-glucoside (SA 2), quercetin-3-O-glucoside (SA3), kaempferol-3-O-rutinoside (SA 4), quercetin-3-O-rutinoside (SA 5) by LC/ESI-MS/MSMS/MS. respectively. The spectrum generated for SAA 1 by LC/ESI-MS/MS in the negative ion mode also gave the ion corresponding to the deprotonated aglycone $[M-H]^-$ (285m/z), the $^1H$-NMR spectrum contained signals [${\delta}$ 6.19 (1H, d, J=1.8Hz, H-6), ${\delta}$ 6.44 (1H, d, J=1.8Hz, H-8), ${\delta}$ 6.92 (2H, d, J=9.0Hz, H-3', 5'), ${\delta}$ 8.04 (2H, d, J=9.0Hz, H-2', 6', thus SAA 1 was identified as kaempferol. SAA 2 yielded the deprotonated agycone ion $[M-H]^-$ (301m/z), $^1H$-NMR spectrum showed signals [${\delta}$ 6.20 (1H, d, J=2.0Hz, H-6), ${\delta}$ 6.42 (1H, d, J=2.0Hz, H-8), ${\delta}$ 6.90 (1H, d, J=8.6Hz, H-5'), ${\delta}$ 7.55 (1H, dd, J=8.6, 2.2Hz, H-6'), ${\delta}$ 7.69 (1H, d, J=2.2Hz, H-2', thus SAA 2 was Identified as quercetin. In conclusion, with the anti-oxidant activity and the stability test reported previously, component analysis of SA extracts could be applicable to new cosmeceuticals.

• Journal of the military operations research society of Korea
• /
• v.18 no.2
• /
• pp.114-125
• /
• 1992

A policy of periodic replacement with minimal repair at failure is considered for a complex system. Under such a policy the system is replaced at periodic times. iT(i=1,2, $\ldots$), while minimal repair is performed at any intervening system failures. The cost of the j-th minimal repair to the component which fails at age t is g(C(t). $c_j$ (t)), where C(t) is the age-dependent random part, $c_j$(t) is the deterministic part which depends on the age and the number of the minimal repair to the component, and g is a positive nondecreasing continuous function. The cost of replacement is expensive when the number of failures occurring in (0. T) is greater than a threshold level. The problem of determining the optimal replacement period, $T^{\ast}$, which minimizes the total expected cost per unit time over an infinite time horizon is considered. Various special cases are considered.

• Transactions of Materials Processing
• /
• v.31 no.6
• /
• pp.351-364
• /
• 2022

The yield criterion, or called yield function, plays an important role in the study of plastic working of a sheet because it governs the plastic deformation properties of the sheet during plastic forming process. In this paper, we propose a modified version of previous anisotropic yield function (Trans. Mater. Process., 31(4) 2022, pp. 214-228) based on J2 and J3 stress invariants. The proposed anisotropic yield model has the 6th-order of stress components. The modified version of the anisotropic yield function in this study is as follows. f(J₂⁰,J₃⁰) ≡ (J₂⁰)³ + α(J₃⁰)² + β(J₂⁰)^3/2 × (J₃⁰) = k⁶ The proposed anisotropic yield function well explains the anisotropic plastic behavior of various sheets such as aluminum, high strength steel, magnesium alloy sheets etc. by introducing the parameters α and β, and also exhibits both symmetrical and asymmetrical yield surfaces. The parameters included in the proposed model are determined through an optimization algorithm from uniaxial and biaxial experimental data under proportional loading path. In this study, the validity of the proposed anisotropic yield function was verified by comparing the yield surface shape, normalized uniaxial yield stress value, and Lankford's anisotropic coefficient R-value derived with the experimental results. Application for the proposed anisotropic yield function to AA6016-T4 aluminum and DP980 sheets shows symmetrical yielding behavior and to AZ31B magnesium shows asymmetric yielding behavior, it was shown that the yield locus and yielding behavior of various types of sheet materials can be predicted reasonably by using the proposed anisotropic yield function.

• Journal of Sensor Science and Technology
• /
• v.25 no.6
• /
• pp.440-446
• /
• 2016

This study introduces the characteristics of current-voltage (I-V) and impedance variance for $ZnO-Zn_2BiVO_6-Co_3O_4$ (ZZCo), which is sintered at $900^{\circ}C$, according to temperature changes. ZZCo varistor demonstrates dramatic improvement of non-linear coefficient, ${\alpha}=66$, with lower leakage current and higher insulating resistivity than those of ZZ ($ZnO-Zn_2BiVO_6$) from the aspect of I-V curves. While both systems are thermally stable up to $125^{\circ}C$, ZZCo represents a higher grain boundary activation energy with 1.05 eV and 0.94 eV of J-E-T and from IS & MS, respectively, than that of ZZ with 0.73 eV and 0.82 eV of J-E-T and from IS & MS, respectively, in the region above $180^{\circ}C$. It could be attributed to the formation of $V^*_o$(0.41~0.47 eV) as dominant defect in two systems, as well as the defect-induced capacitance increase from 781 pF to 1 nF in accordance with increasing temperature. On the other hand, both the grain boundary capacitances of ZZ and ZZCo are shown to decrease to 357 pF and 349 pF, respectively, while the resistances systems decreased exponentially, in accordance with increasing temperature. So, this paper suggests that the application of newly formed liquid phases as sintering additives in both $Zn_2BiVO_6$ and the ZZCo-based varistors would be helpful in developing commercialized devices such as chips, disk-type ZnO varistors in the future.

• East Asian mathematical journal
• /
• v.22 no.2
• /
• pp.249-257
• /
• 2006

Let n be a 2-step nilpotent Lie algebra which has an inner product <,> and has an orthogonal decomposition $n=\delta{\oplus}\varsigma$ for its center $\delta$ and the orthogonal complement $\varsigma\;of\;\delta$. Then Each element Z of $\delta$ defines a skew symmetric linear map $J_Z:\varsigma{\rightarrow}\varsigma$ given by $=$ for all $X,\;Y{\in}\varsigma$. Let $\gamma$ be a unit speed geodesic in a 2-step nilpotent Lie group H(2, 1) with its Lie algebra n(2, 1) and let its initial velocity ${\gamma}$(0) be given by ${\gamma}(0)=Z_0+X_0{\in}\delta{\oplus}\varsigma=n(2,\;1)$ with its center component $Z_0$ nonzero. Then we showed that $\gamma(0)$ is conjugate to $\gamma(\frac{2n{\pi}}{\theta})$, where n is a nonzero intger and $-{\theta}^2$ is a nonzero eigenvalue of $J^2_{Z_0}$, along $\gamma$ if and only if either $X_0$ is an eigenvector of $J^2_{Z_0}$ or $adX_0:\varsigma{\rightarrow}\delta$ is not surjective.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1109-1115
• /
• 2008

The reproduction component traits are important components of sow efficiency. The objective of this study was to evaluate the phenotypic and genetic parameters of four reproduction component traits (age at puberty (AP), preweaning number dead (PND), weaning to service interval (WSI), and intra-individual SD in litter size (IISDLS)) of sows in two Chinese indigenous pig breeds. Available reproductive records including 22,591 piglets born from 2,054 litters by 574 Jiangquhai sows and 464 Meishan sows were used in this investigation. A set of mixed models and restricted maximum likelihood methodology were used for the multiple trait analyses of these traits. The results showed that the estimates of heritabilities (${\pm}$standard error) for AP, PND, WSI and IISDLS were $0.40{\pm}0.05$, $0.06{\pm}0.03$, $0.20{\pm}0.02$ and 0.09{\pm}0.03 in Jiangquhai sows, and $0.35{\pm}0.06$, $0.05{\pm}0.03$, $0.18{\pm}0.03$ and $0.10{\pm}0.04$ in Meishan sows, respectively. There was moderate genetic correlation between AP and WSI, while there were low genetic correlations between the other pairwise traits. The genetic correlations were positive for most of the pairwise traits, except for the one between AP and IISDLS. The results indicated that all traits except for AP were difficult to make genetic improvement by traditional selection methods due to low heritabilities and the favorable improvement of AP might result in unfavorable changes of IISDLS due to the trend of genetic antagonism.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.59-68
• /
• 2020

ECCMIX component was introduced in RELAP5/MOD3 for calculating the interfacial condensation. Compared to other existing components in RELAP5, user experience of ECCMIX component is restricted to developmental assessment applications. To evaluate the capability of the ECCMIX component, ECCS experiment was conducted which included single-phase and two-phase thermal mixing. The experiment was carried out with test sections containing a main pipe (70 mm inner diameter) and a branch pipe (21 mm inner diameter) under the atmospheric pressure. The steam mass flow in the main pipe ranged from 0 to 0.0347 kg/s, and the subcooled water mass flow in the branch pipe ranged from 0.0278 to 0.1389 kg/s. The comparison of the experimental data with the calculation results illuminated that although the ECCMIX component was more difficult to converge than Branch component, it was a more appropriate manner to simulate interfacial condensation under two-phase thermal mixing circumstance, while the two components had no differences under single-phase circumstance.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.219-222
• /
• 2001

The human speech sounds are use to diagnosis in oriental medicine with ‘0-sung’theory. In general, human voice are sound waves which generated by phonation. Two major parts of phonation are vocal cords and vocal tract. The uniqueness of individual vocal sound depend on structure and usage of their vocal cords and tract. In the oriental medicine, “0-sung (5-tones)” has been used to classify constitution of human body In order to characterize the “0-sung”, their frequency characteristics are investigated, and a principal frequency component is extracted. Then, the principal component is applied to classify sounds into “0-sung.”

• Journal of The Korean Astronomical Society
• /
• v.34 no.3
• /
• pp.167-179
• /
• 2001

A molecular line survey towards the UC H II region G34.3+0.15 from 155.3 to 165.3GHz has been conducted with the TRAO 14-m radio telescope. Combined with our previous observations from 84.7 to 115.6GHz and 123.5 to 155.3GHz (Paper I), the spectral coverage of this survey in G34.3+0.15 now runs from 85 to 165 GHz. From these latest observations, a total of 18 lines from 6 species were detected. These include four new lines corresponding to ${\Delta}$J = 0, ${\Delta}$K = 1 transitions of the $CH_3OH$ E-type species, and two new lines corresponding to transitions from $SO_2$ and $HC_3N$. These 6 new lines are $CH_3OH$[1(1) - 1(0)E], $CH_3OH$[2(1) - 2(0)E], $CH_3OH$[3(1) - 3(0)E], $CH_3OH$[4(1) - 4(0)E], $SO_2$[14(1, 13) -14(0, 14)] and $HC_3N$[18 -17]. We applied a rotation diagram analysis to derive rotation temperatures and column densities from the methanol transitions detected, and combined with NRAO 12-m data from Slysh et al. 1999. Applying a two-component fit, we find a cold component with temperature 13-16K and column density $3.3-3.4 {\times} 10^{14} cm^{-2}$, and a hot component with temperature 64 - 83K and column density $9.3{\times}10^{14} - 9.7 {\times} 10^{14} cm^{-2}$. On the other hand, applying just a one-component fit yields temperatures in the 47 -62 K range and column densities from $7.5-1.1 {\times} 10^{15} cm^{-2}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.817-820
• /
• 2007

The effects of diacylglycerol O-acyltransferase (DGAT1) candidate gene polymorphism on the economic traits of Hanwoo were studied. Through sequencing analysis, two polymorphism sites at K232A and T11993C were established and were analyzed by PCR-RFLP. The PCR-RFLP analysis for K232A showed that the frequencies of alleles K and A were 0.75 and 0.25, respectively, and the frequencies of genotypes for K/K, K/A and A/A were estimated as 0.509, 0.491 and 0, respectively. In the PCR-RFLP analysis for T11993C, we found allele frequencies of 0.773 and 0.227 for T and A, respectively, and 0.546, 0.454 and 0 for the T/T, T/C and C/C genotype frequencies, respectively. No significant effects on economic traits in Hanwoo were found in the separate analysis of K232A and T11993C polymorphisms, but the interaction between K232A and T11993C showed a significant effect (p<0.005) on marbling score. The DGAT1 candidate gene was found to have a significant effect not only on milk yield and component traits but also on the metabolism of intramuscular fat.