• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.29-35
• /
• 2004

Hafnium-oxide gate dielectric films deposited by a metal organic chemical vapor deposition technique on a $N_2-plasma$ treated SiNx and a hydrogen-terminated Si substrate have been investigated. In the case of $HfO_2$ film deposited on a hydrogen-terminated Si substrate, suppressed crystallization with effective carbon impurity reduction was obtained at $450^{\circ}C$. X-ray photoelectron spectroscopy indicated that the interface layer was Hf-silicate rather than phase separated Hf-silicide and silicon oxide structure. Capacitance-voltage measurements show equivalent oxide thickness of about 2.6nm for a 5.0 nm $HfO_2/Si$ single layer capacitor and of about 2.7 nm for a 5.7 nm $HfO_2/SiNx/Si$ stack capacitor. TEM shows that the interface of the stack capacitor is stable up to $900^{\circ}C$ for 30 sec.

• Journal of Sensor Science and Technology
• /
• v.22 no.3
• /
• pp.233-237
• /
• 2013

We fabricated electrolyte-insulator-semiconductor (EIS) devices using a solution process and measured the sensing properties of EIS devices according to the thicknesses of sensing membrane. For high pH sensitivity and better stability properties, we used $SiO_2/HfO_x$ (OH) layer as a sensing membrane. In this work, $HfO_x$ sensing membranes were deposited on 5 nm thick $SiO_2$ buffer layer by spin coater with thicknesses of 15, 31, 42, 55 nm, respectively. As a result, we founded that the thickness of $HfO_x$ sensing membrane affects to sensitivity and chemical stability of EIS device. Especially, the EIS device with 42 nm thick $HfO_x$ membrane showed superior sensing ability in terms of pH-sensitivity, linearity, hysteresis voltage and drift rate characteristics than the other devices. In conclusion, we confirmed that it is possible to improve the sensing ability and the chemical stability properties using optimized thickness of sensing membrane and proper annealing process.

• Journal of the Korean Chemical Society
• /
• v.40 no.4
• /
• pp.219-228
• /
• 1996

An ab initio molecular orbital method has been applied to investigation of molecular properties and equilibrium geometries for hexahydroxybenzene triscarbonate (C9O9) and its analogous cyclic compounds (C9S9, C9O6S3, C9O3S6). In these works, the optimized geometry of each compound has been obtained at HF and MP2 levels. These results have shown that the optimized geometries of these compounds prefer D3h planar structure to C3v bowl structure. Calculations of harmonic vibrational frequencies have been also carried out at HF/3-21G* level to analyze normal modes of these compounds. Bonding characters of these compounds are studied by Mulliken and natural populations obtained at HF/6-31G* level. We have also studied the structures and the populations of C6O6 and C6S6 at HF and MP2 levels which are obtained by pyrolyses of C9O9 and analogous compounds. In addition, the single point calculations have been performed to predict the approximate energy barrier for pyrolysis of each compound.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.28-33
• /
• 2006

La substituted perovskite $BiFeO_3$ have been prepared by a sol-gel method. Magnetic and structural properties of the powders were characterized with Mossbauer spectroscopy, XRD, SEM, and TG-DTA. The crystal structure is found to be a rhombohedrally distorted perovskite structure with the lattice constant $\alpha=3.985{\AA}\;and\;\alpha=89.5^{\circ}.\;Bi_{2/3}La_{1/3}FeO_3$ powders that were annealed at and above $600^{\circ}C$ have a single-phase perovskite structure. However, powders annealed at $900^{\circ}C$ have a typical perovskite structure with small amount of $Bi_2O_3$ phase. The Neel temperature of $Bi_{2/3}La_{1/3}FeO_3$ is found to be $680\pm3K$. The isomer shift value at room temperature is found to be 0.27 mm/s relative to the Fe metal, which is consistent with high-spin $Fe^{3+}$ charge states. Debye temperature far$Bi_{2/3}La_{1/3}FeO_3$ is found to be $305\pm5K$. The average hyperfine field $H_{hf}(T)$ of the $Bi_{2/3}La_{1/3}FeO_3$, shows a temperature dependence of $[H_{hf}(T)-H_{hf}(0)]/H_{hf}(0)=-0.42(T/T_N)^{3/2}-0.13(T/T_N)^{5/2}$ for $T/T_N<0.7$ indicative of spin-wave excitation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.73-73
• /
• 2009

트렌지스터의 채널 길이가 줄어듦에 따라 절연층으로 쓰이는 $SiO_2$의 두께는 얇아져야 한다. 이에 따라 얇아진 절연층에서 터널링이 발생하여 누설전류가 증가하게 되어 소자의 오동작을 유발한다. 절연층에서의 터널링을 줄여주기 위해서는 High-K와 같은 유전율이 높은 물질을 이용하여 절연층의 두께를 높여주어야 한다. 최근에 각광 받고 있는 High-K의 대표적인 물질은 $HfO_2$, $ZrO_2$와 $Al_2O_3$등이 있다. $HfO_2$, $ZrO_2$와 $Al_2O_3$는 $SiO_2$보다 유전상 수는 높지만 밴드갭 에너지, 열역학적 안정성, 재결정 온도와 같은 특성 면에서 $SiO_2$를 완전히 대체하기는 어려운 실정이다. 최근 연구에 따르면 기존의 High-K물질에 금속을 첨가한 금속산화물의 경우 밴드갭 에너지, 열역학적 안정성, 재결정 온도의 특성이 향상되었다는 결과가 있다. 이 금속 산화물 중 $HfAlO_3$가 대표적이다. $HfAlO_3$는 유전상수 18.2, 밴드캡 에너지 6.5 eV, 재결정 온도 $900\;^{\circ}C$이고 열역학적 안전성이 개선되었다. 게이트 절연층으로 사용될 수 있는 $HfAlO_3$는 전극과 기판사이에 적층구조를 이루고 있어, 이방성 식각인 건식 식각에 대한 연구가 필요하다. 본 연구는 $BCl_3$/Ar 유도결합 플라즈마를 이용하여 $HfAlO_3$ 박막의 식각 특성을 알아보았다. RF Power 700 W, DC-bias -150 V, 공정압력 15 mTorr, 기판온도 $40\;^{\circ}C$를 기본 조건으로 하여, $BCl_3$/Ar 가스비율, RF Power, DC-bias 전압, 공정압력에 의한 식각율 조건과 마스크물질과의 선택비를 알아보았다. 플라즈마 분석은 Optical 이용하여 진행하였고, 식각 후 표면의 화학적 구조는 X-ray Photoelectron Spectroscoopy(XPS) 분석을 통하여 알아보았다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.42-44
• /
• 2003

최근 logic 소자의 gate oxide로 기존의 $SiO_2$, SiON보다 고유전, 작은 누설전류를 가지는 물질의 개발이 중요한 이슈가 되고 있다. 본 실험실에서는 Si 기판위에 $HfO_2$ 를 바로 증착하는 경우, 기판의 Si 이박막내로 확산하여 유전율이 저하되는 문제점을 인식하고, 기판과 $HfO_2$ 사이에 $AlO_x$를 방지막으로 사용하였다. 이 때, $AlO_x$의 Al precursor 는 TMA 로 고정하고, 산화제로는 $H_2O, O_2$-plasma, O_3$ 를 각각 사용하였다. 모든 $AlO_x/HfO_y$ 박막에서 매우 우수한 누설전류특성을 얻을 수 있었는데, 특히 $O_3$ 를 산화제로 사용한 $AlO_x$ 방지막의 경우 가장 우수한 특성을 보였다. 또한 질소 분위기에서 $800^{\circ}C$ 10 분간 열처리한 후, 방지막을 사용한 모든 경우에서 보다 향상된 열적 안정성을 관찰할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.359-360
• /
• 2013

The effect of electrode and deposition methods on non-linear interfacial resistive switching in HfO2 based $250{\times}250$ nm2 cross-point device was studied. HfO2 based device has the interfacial resistive switching properties of non-linearity and self-compliance current switching. The operating current in HfO2 based device was increased with negatively increasing the heat of formation energy in top electrode. Also, it was investigated that the operating current in HfO2 based device was changed with deposition methods of O3 reactant ALD, H2O reactant ALD and dc reactive sputtering, resulting the magnitude of the operating current and on/off ratio in order of HfO2 films deposited by dc reactive sputtering, H2O reactant ALD, and O3 reactant ALD. To investigate the effect of electrode and deposition methods on operating current of non-linear interfacial resistive switching in the cross-point device, X-ray photoelectron spectroscopy was measured. Through the analysis of O 1s spectra, non-lattice oxygen concentration, which is closely related to oxygen vacancies, was increased in order of Pt, TiN, and Ti top electrodes and in order of O3 reactant ALD, H2O reactant ALD, and O3 reactant ALD, and dc reactive sputtering deposition method. From all results, non-lattice oxygen concentration in ultra-thin HfO2 films play a crucial role in the operating current and memory states (LRS & HRS) in the non-linear interfacial resistive switching.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.103-103
• /
• 2002

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.27-31
• /
• 2018

The effect of $NH_3$ plasma passivation on the chemical and electrical characteristics of ALD HfAlO dielectric on the InGaAs substrate was investigated. The results show that $NH_3$ plasma passivation exhibit better electrical & chemical performance such as much lower leakage current, lower density of interface trap(Dit) level, and low unstable interfacial oxide. $NH_3$ plasma passivation can effectively enhance interfacial characteristics. Therefore $NH_3$ plasma passivation improved the HfAlO dielectric performance on the InGaAs substrate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.362-365
• /
• 2002

Hf thin films were deposited on bottom metal using a RF magnetron sputtering method followed by oxidation and annealing in O$_2$ and N$_2$ ambient, respectively. Various top metal electrodes (i.e., Al, Au, and Cu) were deposited by evaporation, and their roles on physical and electrical properties were investigated. Using the XRD, SEM and AFM techniques, we confirmed that the grain size of HfO$_2$ thin films enlarges as a function of oxidation temperature, increasing dielectric constant. However, other electrical properties (e.g., tan) deteriorateas a consequence. The dielectric constant and tan of HfO$_2$ thin films oxidized at 500 $^{\circ}C$ were 17-25 and 3${\times}$10-3 - 2x10-2, respectively, in the frequency range of 1 Hz to 1 MHz. The leakage current density was less than 1${\times}$10-8A/cm2 up to 0.7 MV/cm. In addition, electrical properties of HfO$_2$ thin films (e.g., the dielectric constant, leakage current and tan $\delta$) depend on top metal electrode. We showed that Al top metal electrode results in the best result.