• 한국약용작물학회지
• /
• 제10권4호
• /
• pp.243-248
• /
• 2002

The effects of basal media, carbon, nitrogen, phosphate and some major macro elements on growth and shikonin production in Lithospermum erythrorhizon hairy root culture were studied. Among examined media, growth of hairy root cultured in B5 liquid medium was rapid, whereas shikonin production was high in MS liquid medium. Under B5 basal medium, sucrose concentration for optimal growth and shikonin production was 9% and 4% respectively. The growth and shikonin production on pH changes in B5 medium resulted little effect in pH 5.8 to pH 8.8 ranges, whereas growth was decreased dramatically in both above 8.8 and under 5.8. Nitrogen source and concentration effected on the growth and shikonin production. The highest growth rate was in B5 medium (50 mM $KNO_3$ and 1 mM $NaH_2PO_4)$, whereas the highest shikonin production was in the condition supplemented with 5 mM $KNO_3$ and 10 mM $NaH_2PO_4$.

• 자원리싸이클링
• /
• 제10권4호
• /
• pp.24-33
• /
• 2001

For making a high degree of efficiency, this study attempts to gather each arisen-sludge from experiments and examine into its characteristics, in order to compare the biological reason of removing phosphorus with sintered body using calcite and the artificial reason of removing with a chemical reagent. First, it can be seen that sludge, which is identified CaCO$_3$, of 0.1∼0.2$\mu$m is regularly formed when using sintered body, calcite. And it is one of the results of the chemical methods in order to remove phosphorus that can be seen that sludges of 100∼50 $\mu$m are formed and that the forms of Ca$_2$P$_2$O$\_$7/, Ca$_3$(PO$_4$)$_2$$.$nH$_2$O, $\beta$-Ca$_2$P$_2$O$\_$7/ are shown when using a reagent, CaO dissolved water. The other of the results of the chemical methods can be seen that a lumpof sludge is formed when using wastewater and a reagent Ca$^2$$\^$+/ are used, and that the lump consists of Ca$_3$(PO$_4$)$_2$$.$nH$_2$O와 Ca$_2$H$_2$P$_4$O$\_$14/.

• 한국미생물·생명공학회지
• /
• 제18권6호
• /
• pp.591-598
• /
• 1990

Lenzites betulina(조개껍질버섯균) 등 6종 담자균류의 tannase (tannin acylhydrolase EC 3.1.1.20) 생산을 비교하고 Lenzites betulina가 가장 우수하여 이 균주의 배양물로부터 효과적인 tannase 생산조건과 효소의 특성을 검토하였다. Lenzites betulina의 tannase 최적 생산을 위한 배양 조건은$25^{\circ}C$, pH6.0에서 21일이었고, tannase acid 2g, sucrose 5g, bacto-peptone 2g,$ KH_2PO_4, \;2g,\; MgSO_4.7H_2O \;0.5g,\; CuS0_4.5H_2O$ 2mg, thinamine.HCL 100Mug, 증류수 1000ml이었다.

• 한국재료학회지
• /
• 제23권5호
• /
• pp.255-259
• /
• 2013

An effect of thermal annealing on activating phosphorus (P) atoms in ZnO nanorods (NR) grown using a hydrothermal process was investigated. $NH_4H_2PO_4$ used as a dopant source reacted with $Zn^{2+}$ ions and $Zn_3(PO_4)_2$ sediment was produced in the solution. The fact that most of the input P elements are concentrated in the $Zn_3(PO_4)_2$ sediment was confirmed using an energy dispersive spectrometer (EDS). After the hydrothermal process, ZnO NRs were synthesized and their PL peaks were exhibited at 405 and 500 nm because P atoms diffused to the ZnO crystal from the $Zn_3(PO_4)_2$ particles. The solubility of the $Zn_3(PO_4)_2$ initially formed sediment varied with the concentration of $NH_4OH$. Before annealing, both the structural and the optical properties of the P-doped ZnO NR were changed by the variation of P doping concentration, which affected the ZnO lattice parameters. At low doping concentration of phosphorus in ZnO crystal, it was determined that a phosphorus atom substituted for a Zn site and interacted with two $V_{Zn}$, resulting in a $P_{Zn}-2V_{Zn}$ complex, which is responsible for p-type conduction. After annealing, a shift of the PL peak was found to have occurred due to the unstable P doping state at high concentration of P, whereas at low concentration there was little shift of PL peak due to the stable P doping state.

• Journal of Electrochemical Science and Technology
• /
• 제9권2호
• /
• pp.85-92
• /
• 2018

Olivine structure of $LiFePO_4$ (LFP) is one of the most commonly used materials in aqueous rechargeable lithium batteries (ARLBs), and can store and release charge through the insertion/de-insertion of $Li^+$ between LFP and FP. We have fabricated LFP and LFP/FP electrodes on titanium paper and studied their electrochemical properties in 2 M $Li_2SO_4$. The LFP/FP electrode was determined to be a suitable electrode for electo-ostmotic pump (EOP) in terms of efficiency in water and 0.5 mM $Li_2SO_4$ solution. Experiments to determine the effect of cations and anions on the performance of EOP using LFP/FP electrode have shown that $Li^+$ is the best cation and that the anion does not significantly affect the performance of the EOP. As the concentration of $Li_2SO_4$ solution was increased, the current increased. The flow rate peaked at $4.8{\mu}L/30s$ in 1.0 mM $Li_2SO_4$ solution and then decreased. When the EOP was tested continuously in 1.0 mM $Li_2SO_4$ solution, the EOP transported approximately 35 mL of fluid while maintaining a stable flow rate and current for 144 h.

• 대한화학회지
• /
• 제66권2호
• /
• pp.86-91
• /
• 2022

안동에 있는 한 가축 농가의 우사에서 깔짚으로 왕겨와 톱밥으로 만든 퇴비를 각각 채취하였다. 분뇨의 발효 효율은 깔짚의 종류와 특성에 의해서 상당한 영향을 받으며 부영양화의 원인물질인 질소와 인을 저감시키기 위해 고려되어야 할 요소이다. 시료의 온도에 따른 중량 변화는 열중량 분석기(TG-DTA)로, 구성성분은 X-선 형광분석기(XRF)로 조사하였다. 빗물에 의해 퇴비에서 침출되어 나오는 아질산성질소(NO₂^-), 질산성 질소(NO₃^-), 인산이온(PO₄^3-)과 암모니아성 질소(NH₄⁺), 총인(T-P), 총질소(T-N)는 각각 각각 이온 크로마토그래프(IC)와 자외선/가시광선 분광기(UV/Vis spectrometry)를 이용하여 측정하였다. 결과적으로, 왕겨에 비하여 톱밥에서 분뇨의 발효 효율이 대략 3배 높게 나타났다. 우분의 발효성이 높을수록 암모니아성 질소의 탈질화 효율이 높았으며, 유기인도 인산이온으로 변화되었다. 덧붙여, 인산이온은 Ca와 Mg를 첨가하여 인산칼슘(CaHPO₄·3H₂O)과 스투루바이트(NH₄MgPO₄·6H₂O) 형태의 난용성염을 생성 시킴으로서 제거 할 수 있다.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.383-392
• /
• 2020

In this paper, AgCl/Ag₃PO₄/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag₃PO₄/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag₃PO₄/diatomite composite under visible light are evaluated. In the AgCl/Ag₃PO₄/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag₃PO₄/diatomite remains at 95 % of the original level, much higher than that of pure Ag₃PO₄ (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag₃PO₄/diatomite composites can be attributed to the synergistic effect of Ag₃PO₄, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO₂ and H₂O. Even more remarkably, AgCl/Ag₃PO₄/diatomite can maintain above 95 % photo-degradation activity after five cycles.

• Journal of Electrochemical Science and Technology
• /
• 제12권3호
• /
• pp.339-345
• /
• 2021

Spent activated carbons (SACs) collected from a water treatment plant were regenerated and then adopted as electrochemical material in capacitors. The SACs used in this study were regenerated via two steps, namely thermal and chemical activation. However, during the activation process, the adsorbates were converted into ashes, which caused pore blockage and decreased specific surface area. The regenerated SACs were washed with acid solutions with different levels of acidity (strong: HCl, mild: H₃PO₄, and weak: H₂O₂) to remove the ashes. The regenerated SACs washed with HCl exhibited the highest specific surface area, although their capacitance was not the highest. Conversely, the specific surface area of regenerated SACs washed using H₃PO₄ was slightly lower than that of HCl, but exhibited higher capacitance and electrochemical stability. Although the strong acid removed the generated ashes in the pores efficiently, it could adversely affect their structural stability, which would lead to lower capacitance.

• 대한화학회지
• /
• 제52권2호
• /
• pp.124-132
• /
• 2008

H3SO4(M: 몰농도) 용액에서 탄소강의 부식방지제로 Furfural hydrazone 유도체의 효과를 질량손실법 및 정전류극성법을 사용해 연구하였다. 이들 유도체 존재하에서 탄소강의 부식속도가 급격히 감소함을 관찰하였다. 이 연구로부터 부식방지효율은 부식방지제 농도가 증가함에 따라 증가하였고 I와 SCN을 첨가하면 부식방지효율은 더욱 증가되었다. 질량손실법을 사용해 5×10-6 M의 유도체가 있을 때와 없을 때 30-60oC 사이에서 탄소강 부식에 미치는 온도 효과를 보았다. 부식과정에 대한 활성화에너지(Ea*)와 다른 열역학적 변수들을 계산하였고 이들에 대해 논의하였다. 정전류극성법을 통해 유도체들이 혼합형 방지제로 작용함을 알았고 외부전류를 흘려주었을 때 음극은 더욱 분극되었다. 3M H3SO4 용액에서 탄소강 표면에 이들 유도체들의 흡착은 Frumkin의 흡착등온을 따랐다. 이들 유도체들의 화학구조를 통해 부식방지 메커니즘을 설명하였다.

• 한국결정성장학회지
• /
• 제26권4호
• /
• pp.131-134
• /
• 2016

Czochralski 법으로 성장한 RE : YAG ($RE=Nd^{3+}\;,Er^{3+}\;,Yb^{3+}$) 단결정의 표면 결함을 측정하는 chemical polishing 및 etching 조건에 대하여 조사하였다. 최적의 chemical polishing 조건은 시편을 수직 방향으로 고정하고 85 % $H_3PO_4$ 용액에서 $330^{\circ}C$, 30분 동안 진행한 것이었다. 또한 최적의 chemical etching 조건은 85 % $H_3PO_4$ 용액에서 $260^{\circ}C$, 1시간 동안 진행한 것이었고, (111) 면에 $70~80{\mu}m$ 크기의 삼각형 etch pit들이 관찰되었다. 결함 밀도 분석 결과, Nd(1 %) : YAG는 $1.9{\times}10^3$개/$cm^2$, Er(7.3 %) : YAG는 $4.3{\times}10^2$개/$cm^2$, Yb(15 %) : YAG는 $5.1{\times}10^2$개/$cm^2$로 측정되었다.