• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.261-266
• /
• 1995

본 연구에서는 자기부상시스템에 대해 흡인식 자기부상방식을 채택하고 쇠구슬에 대한 운동을 상하 1자유도로 가정하여 운동방정식을 세운다. 이때 전자석이 자기 부상력은 전자석에 흐르는 전류와 인덕턴스의 함수라 가정하고, 모델의 불확실성은 자기부상계의 운동 방정식으로부터 선형화 할 때 발생하는 오차 및 파라미터 변동으로 생각한다. 또한 모델의 불확실성이 존재하더라도 정상편차 없이 부상하는 서보제어계를 설계한다. 그런데 저자등은 강인성 문제 및 정상편차 없는 것에 역점을 두어 H$_{\infty}$ 제어이론에 기초한 1형 로바스트 서보 제어기를 구하여 자기부상 시스템의 안정화 제어계로써 적용한 적이 있다. 이때 중심해 이외의 해를 이용하여 설계한 서보 제어계는 자기부상계의 과도상태시에 일어나는 오버슈트를 줄일 수 없었다. 따라서 시스템 내부 안정화를 위하여 H$_{\infty}$ 제어이론에 의해 설계된 피드백(feedback) 제어기와 물체가 부상할 때 오버슈트를 줄이고 제어량이 목표치에 잘 추종하기 위해 설계된 피드 포워드(feed forward) 제어기로써 2자유도를 갖는 제어계를 설계한다. 이렇게 설계한 2자유도 제어계를 가지고 모의 응답실험과 본 연구자들이 만든 자기부상 시스템의 실험결과를 비교함으로써 설계된 제어기의 타당성을 조사한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.3
• /
• pp.148-156
• /
• 2005

The purpose of this paper is to propose an approach to design a robust servo controller based on the mixed $H_2/H_{\infty}$ theory, and confirm its validity by applying to a benchmark problem. First, the existing $H_{\infty}$ servo problem is modified to a structure for the mixed $H_2/H_{\infty}$ control problem by virtue of the internal model principle. By making use of proposed structure, we can divide specifications required in the robust servo system design into $H_2$ and $H_{\infty}$ performance criteria, respectively. It is shown that the proposed design approach is quite effective through an application to a three inertia benchmark problem.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.32-41
• /
• 2008

In this paper, we describe the synthesis of robust and non-fragile $H^{\infty}$ state feedback controllers for linear systems with affine parameter uncertain tracking servo system of blu-ray disc drive, as well as static state feedback controller with polytopic uncertainty Similarity any other control system, the objective of the track-following system design for optical disc drives is to construct the system with better performance and robustness against modeling uncertainties and various disturbances. Also, the obtained condition can be rewritten as parameterized linear matrix inequalities(PLMIs), that is, LMIs whose coefficients are functions of a parameter confined to a compact set. We show that the resulting controller guarantees the asymptotic stability and disturbance attenuation of the closed loop system in spite of controller gain variations within a resulted polytopic region.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.673-678
• /
• 2001

This paper proposes a new type of piezoactuator-driven valve system. The piezoceramic actuator bonded to both sides of a flexible beam surface makes a movement required to control the pressure at the flapper-nozzle of a pneumatic valve system. After establishing a dynamic model, an appropriate size of the valve system is designed and manufactured. Subsequently, a robust $H_{\infty}$ control algorithm is formulated in order to achieve accurate tracking control of the desired pressure. The controller is experimentally realized and control performance for the sinusoidal pressure trajectory is presented in time domain. The control bandwidth of the valve system, which directly represents the fastness, is also evaluated in the frequency domain.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.62-69
• /
• 1999

This paper presents a design method of dynamic positioning control system(DPS) for floating Platform with rotatable and retractable thrusters using H$\infty$ servo control design method. The norm band of uncertainty is captured by multiplicative perturbation between nominal model and reduced order model. A controller robust to the uncertainty is designed applying H$\infty$ synthesis. The control law satisfying robust stability and nominal performance condition is determined through the mixed sensitivity approach. The control algorithm was evaluated on the basis of computer simulation for a proposed DPS design method and experiments was carried out with an image processing method for measurement of DPS position in a water tank The results of overall experiments show that proposed control method will be good to keep at a specified position. And they are compared with the experimental results by LQG synthesis and H$\infty$ optimal control design method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.25-34
• /
• 2000

In this paper, we design a H^\infty servo controller for gauge control of tandem cold mill. To improve the performance of the AGC(Aotomatic Gauge Control) system based on the Taylor linearized model of tandem cold mill, the H^\infty servo controller is designed to satisfy robust stability, disturbance attenuation and robust tracking properties. The H^\infty servo controller problem is modified as an usual H^\infty control problem, and the solvability condition of the H^\infty servo problem depends on the solvability of the modified H^\infty control problem. Since this modified problem does not satisfied standard assumptions for the H^\infty control problem, it is solved by an LMI(Linear Matrix Inequality) technique. Consequently, the comparison between the H^\infty servo controller and the existing PID/FF(FeedForward) controller shows the usefulness of this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1171-1179
• /
• 2012

In this study, we consider a dynamic positioning system (DPS) design problem that can be extended to many application fields. Toward this end, tracking and positioning control problems are discussed. In particular, we design a tracking control system that incorporates an observer based on the 2-DOF servo system design approach in order to obtain the desired state information. In the case of observer design, a weighted $H_{\infty}$ error bound approach for a state estimator is considered. Based on an algebraic Riccati equation (inequality) approach, a necessary and sufficient condition for the existence of a full-order estimator that satisfies the weighted $H_{\infty}$ error bound is introduced. The condition for the existence of the estimator is denoted by a linear matrix inequality (LMI) that yields an optimized solution and the observer gain.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.84-90
• /
• 1995

The magnetic levitation system has great advantages, such as little friction, no lubrication no noise and so on. The magnetic levitation system need a stabilizing controller because it is a unstable system in natural. This paper presents the robust stabilizing controller design of the magnetic levitation system. The controller which is designed in this paper by $H_{infty}$ control theory is robust servo controller which has zero offset in spite of the model uncertainties. The validity of controller was investigater through the response simulation. In the future, we will use the result of this study at the actual magnetic levitation system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.144-153
• /
• 1996

The magnetic levitation system has many advantages, such as little friction, no lubrication, no noise and so on. For this reason, the magnetic levitation system is utilized in the magnetic bearing of high-speed rotor. The method to obtain magnetic force is both the repulsive suspension method and the attraction suspension method need a stabilizing controller because it is a unstable system in natural. This paper presents the design of robust stabilizing servo controller in spite of being the model uncertainties in the magnetic levitation system by $\textit{H}_{\infty}$ control theory using the free parameter. And we investigated the validity of a designed controller through results of the simulation and the actual experiment.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.323-326
• /
• 2003

본 논문에서는 PID 제어기를 이용해 외란제거를 함은 물론 최적 제어가 될 수 있는 파라메터를 유전자 알고리즘을 통해 구하는 방법을 제안하였다. 외란제거를 위해 $H_\infty$-norm을 응용하여 제어시스템의 외란 제거 조건들을 제시하고 이 조건들을 만족하는 PID 제어기를 설계하였다. 설계된 PID제어기의 최적 파라메터를 구하기 위해 유전자 알고리즘을 이용하였고 최적 파라메터를 평가하기 위하여 ITSE(Integral of time weighted squared error)성능지수를 이용하였다. 위의 설계 기법들을 서보모터의 제어에 적용하여 만족할 만한 결과를 얻었다.