• Clean Technology
• /
• v.23 no.1
• /
• pp.104-112
• /
• 2017

Hydrogen production via steam reforming of liquefaction liquid from marine algae over hydrothermal liquefaction was carried out at 873 ~ 1073 K with a commercial catalyst and Ni based $K_2Ti_xO_y$ added catalysts. Liquefaction liquid obtained by hydrothermal liquefaction (503 K, 2 h) was used as a reactant and comparison studies for catalytic activity over different catalysts (FCR-4-02, $Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$ and Ni/$K_2Ti_xO_y$-MgO), reaction temperature were performed. Experimental results showed Ni/$K_2Ti_xO_y$ based catalysts ($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, Ni/$K_2Ti_xO_y-ZrO_2$/ $CeO_2$ and Ni/$K_2Ti_xO_y$-MgO) have a higher activity than commercial catalyst (FCR-4-02) and In particular, a product composition was different depending on support materials. An acidic support ($Al_2O_3$) and a basic support (MgO) led to a higher selectivity for CO while a neutral support ($SiO_2$) and a reducing support ($ZrO_2/CeO_2$) resulted in a higher $CO_2$ selectivity due to water gas shift reaction.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.668-673
• /
• 1995

$UO_2$-CeO$_2$ 모의혼합분말에 첨가제를 미량 첨가하여 소결체의 미세구조 변화를 $UO_2$분말의 경우와 비교, 관찰하였다. 소결 첨가제로서 Ta, Ti 및 Nb를 사용하였으며, 이들을 미세한 산화물의 형태로 $UO_2$ 및 $UO_2$-CeO$_2$에 첨가하여 환원성 및 산화성 분위기에서 각각 소결하였다. Ta, Ti 및 Nb는 환원소결에서 $UO_2$의 결정립을 성장시켰으나 산화소결에서는 첨가효과가 크게 나타나지 않았다. $UO_2$-0.lw%TiO$_2$와 $UO_2$-0.6w%Ta$_2$O$_{5}$의 환원소결체에서 eutectic phase가 관찰되었으나 산화소결체에서는 나타나지 않았다. $UO_2$-4wt%CeO$_2$의 환원소결에서는 Ti만이 결정립성장에 기여하는 것으로 나타났으며 Ta, Nb와 같이 $UO_2$에 치환형으로 고유되는 원소는 Ce 이온과 Cluster를 형성함으로 결정립성장에 거의 기여하지 못하고, Ti와 같이 UO2$_2$ 침입형으로 고용되는 원소는 일부가 인접한 Ce$_{U}$' 이온과 cluster를 형성하더라도 나머지가 V$_{U}$'의 형성에 기여하므로서 결정립을 성장시킬 수 있다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.33.2-33.2
• /
• 2006

• Proceedings of the Korean Vacuum Society Conference
• /
• 1992.07a
• /
• pp.35-35
• /
• 1992

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.168-171
• /
• 2003

Bismuth layered structure, Cerium-substituted $Bi_4Ti_3O_{12}$ ($(Bi,Ce)_4Ti_3O_{12}$) thin films were prepared on the $Pt/TiO_2/SiO_2/Si$ substrates by the pulsed laser deposition method. We investigated the Ce-subsitituted effect on the grain orientation and ferroelectric properties. $Ce^{3+}$ ion substitution for $Bi^{3+}$ ion in perovskite layers of BTO decreased the deeree of c-axis orientation and increased the remanent polariation (2Pr). The structure and morphology of the films were characterized using X-ray diffraction and atomic force microscopy. The $(Bi,Ce)_4Ti_3O_{12}$ (BCT) thin films, which were annealed $700^{\circ}C\;and\;800^{\circ}C$ for 10min and 30min, showed a perovskite phase and dense microstructure. As the thickness of the BCT film was decresed that the ferroelectric properties of the BCT thin films were good.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1051-1057
• /
• 2000

TiO$_2$와 CeO$_2$박막을 Si 위에 증착한 후 MOCVD법에 의해 PbTiO$_3$박막을 증착하여 MFIS 구조를 형성하였다. 절연층의 후열처리가 절연층 및 MFIS 구조의 전기적 특성에 미치는 영향을 관찰하기 위해 산소분위기와 $600^{\circ}C$~90$0^{\circ}C$의 온도범위에서 후 열처리를 행하였고, C-V 특성 및 누설전류 특성을 분석하였다. CeO$_2$와 TiO$_2$박막의 유전상수는 증착 직후 6.9와 15였으며, 90$0^{\circ}C$ 열처리를 행한 후 약 4.9와 8.8로 감소하였다. 누설전류밀도 역시 증착 직후 각각 7$\times$$10^{-5}$ A/$ extrm{cm}^2$와 2.5$\times$$10^{-5}$ A/$\textrm{cm}^2$에서 90$0^{\circ}C$ 열처리를 거친 후에 약 4$\times$$10^{-8}$ A/$\textrm{cm}^2$와 4$\times$$10^{-9}$ A/$\textrm{cm}^2$로 감소하였다. Ellipsometry 시뮬레이션을 통해 계산된 계면층의 두께는 90$0^{\circ}C$에서 약 115$\AA$(CeO$_2$) 및 140$\AA$(TiO$_2$)까지 증가하였다. 계면층은 MFIS 구조에서 강유전층에 인가되는 전계를 감소시켜 항전계를 증가시켰고, charge injection을 방지하여 Al/PbTiO$_3$/CeO$_2$(90$0^{\circ}C$, $O_2$)/Si 구조의 경우 $\pm$2 V~$\pm$10 V의 측정범위에서 memory window가 계속 증가하는 것을 보여주었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.339-339
• /
• 2010

The metallic nanoparticles (Pt, Au, Ag. Cu, etc.) supported on ceria-titania mixed oxide exhibit a high catalytic activity for the water gas shift reaction ($H_2O\;+\;CO\;{\leftrightarrow}\;H_2\;+\;CO_2$) and the CO oxidation ($O_2\;+\;2CO\;{\leftrightarrow}\;2CO_2$). It has been speculated that the high catalytic activity is related to the easy exchange of the oxidation states of ceria ($Ce^{3+}$ and $Ce^{4+}$) on titania, but very little is known about the ceria titanium interaction, the growth mode of metal on ceria titania complex, and the reaction mechanism. In this work, the growth of $CeO_x$ and Au/$CeO_x$ on rutile $TiO_2$(110) have been investigated by Scanning Tunneling Microscopy (STM), Photoelectron Spectroscopy (PES), and DFT calculation. In the $CeO_x/TiO_2$(110) systems, the titania substrate imposes on the ceria nanoparticles non-typical coordination modes, favoring a $Ce^{3+}$ oxidation state and enhancing their chemical activity. The deposition of metal on a $CeO_x/TiO_2$(110) substrate generates much smaller nanoparticles with an extremely high activity. We proposed a mechanism that there is a strong coupling of the chemical properties of the admetal and the mixed-metal oxide: The adsorption and dissociation of water probably take place on the oxide, CO adsorbs on the admetal nanoparticles, and all subsequent reaction steps occur at the oxide-admetal interface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.236-237
• /
• 2005

The structural properties of $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films with post-annealing temperature were investigated. $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films were deposited by RF sputtering method on Pt/Ti/$SiO_2$/Si substrates with optimum deposition condition. The $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films was post-annealed at 600$^{\circ}C$, 650$^{\circ}C$, 700$^{\circ}C$, 750$^{\circ}C$, 800$^{\circ}C$ in furnace,respectively. Increasing the post-annealing temperature, the grain size, density and peak intensity of (117) and c-axis orientation were increased. The $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films that annealed at 750$^{\circ}C$ exhibited well crystallized phase and had no vacancy and grain was uniform. but there are some secondary phases observed. At this time, the average thickness of $(Bi,Ce)_4Ti_3O_{12}(BCT)$ thin films was 2000 ${\AA}$.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.873-875
• /
• 1999

We have fabricated good quality superconducting $YBa_{2}Cu_{3}O_{7-\delta}$ thin films on Hastelloy(Ni-Cr-Mo alloys) metallic substrate with $CeO_2$ and $BaTiO_3$ buffer layers in-situ by pulsed laser deposition in a multi-target processing chamber. We have chosen $CeO_2$ as a buffer layer which has cubic structure of $5.41{\AA}$ lattice parameter and only 0.2% of lattice mismatch with YBCO. $CeO_2$ layer may be helpful for power transmission due to its conducting property. In order to enhance the crystallization of YBCO films on metallic substrates. we deposited $CeO_2$ and $BaTiO_3$ buffer layers at various temperatures. The YBCO superconducting tape fabricated with $BaTiO_3$ and $CeO_2$ buffer layers shows 85K of transition temperature and about $8.4{\times}10^4A/cm^2$ of critical current density at 77K.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.197-201
• /
• 2017

A novel method for the detection of hydrogen peroxide in aqueous solution was developed via reaction between $H_2O_2$, trivalent titanium ion ($Ti^{3+}$) and 4-(2-thiazolylazo) resorcinol (TAR), resulting in a ternary complex with a maximum UV absorbance at 530 nm. The CE detection of $H_2O_2$ was fast, sensitive and cost-effective without pretreatment procedures. $H_2O_2$ was detected within 15 min at 1 to $100{\mu}M$ range with the lowest detection limit at $1.0{\mu}M$. Under the optimized CE conditions, the concentration of $H_2O_2$ in coffee or tea extract was quantitatively determined. Our results show that CE detection of the ternary complex of $H_2O_2-Ti^{3+}$-TAR has potential applications for the detection of $H_2O_2$ in aqueous sources.