• Journal of Sensor Science and Technology
• /
• v.20 no.1
• /
• pp.64-69
• /
• 2011

Porous manganese oxide porous nanostructures were prepared by amino-acid-mediated solvothermal self assembly reaction and subsequent heat treatment at $600^{\circ}C$. When Mn-precursors were heat-treated at $400-550^{\circ}C$, the sensors did not show significant gas responses. In contrast, the manganese oxide heat-treated at $600^{\circ}C$ showed the significant gas responses, that is, the resistance decrease to 100 ppm $C_3H_8$ ($R_a/R_g$ = 2.17, $R_a$ : resistance in air, $R_g$ : resistance in gas) and the resistance increase to 100 ppm $C_2H_5OH$ ($R_g/R_a$ = 1.92). The opposite change of resistance upon exposure to $C_3H_8$ and $C_2H_5OH$ was discussed in relation to the mixed phases of manganese oxides with different valences.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.4
• /
• pp.173-176
• /
• 2005

A new $MoO_3$ based microsensor with low power consumption was presented. Typical size of sensor was 5mm in width and 8mm in length. As a sensitive electrode, $MoO_3$ was successfully fabricated by IC technology on pyrex glass of $250{\mu}m$ in thickness. After annealing at $550^{\circ}C$ for 3hrs, the film was fully crystallized and demonstrated as pure $MoO_3$ structure. The grain size of $MoO_3$ was plat like and typical size was about $1{\mu}m$. Based on the results of sensitivity measurement, $MoO_3$ microsensor shows especially high selectivity to $H_2$ reducing gas atmosphere. The applied heater power was lower than 0.5 Watt.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.356-360
• /
• 2002

Polluting the air with such pollutants as CO, H₂S and SO₂, industrial development huts increased the danger of gas toxication. Futhermore, as the: living standard goes higher, the consumption of explosive hydrocarbonic gases such as butane(C₄H/sub 10/) or propane(C₃H/sub 8/) has been soaring, which results in the danger of a gas explosion. As measures to cope with such dangers, the development of highly sensitive gas sensors, gas detectors adopting gas-sensing technologies, and gas recognition systems are urgently required. The objective of the present research is to develop a gas recognition system that is capable of identifying specific types of selected gases by formulating a semiconductor-typed gas sensor array, which not only improves the selectivity of semiconductor-typed gas sensors but also minimizes the erect of drifts on a single sensor signal, and applying the input pattern data of gases detected by the array to a neural network.

• Journal of Sensor Science and Technology
• /
• v.16 no.1
• /
• pp.7-10
• /
• 2007

A thick film catalytic gas sensors which can be operated at $142^{\circ}C$ in presence of ultra violet-light emitting diode has been developed to measure hydrogen concentration in 0-5 % range. The sensing material as a combustion catalyst consists of $TiO_{2}$ (5 wt%) and Pd/Pt (20 wt%) supported on $Al_{2}O_{3}$ powder and the reference material to compensate the heat capacity of it in a bridge circuit was an catalyst free $Al_{2}O_{3}$ powder. Platinum heater and sensor materials were formed on the alumina plate by screen printing method and heat treatment. The effect of UV radiation in the presence of photo catalyst $TiO_{2}$ on the sensor sensitivity, response and recovery time has been investigated. The reduction of operating temperature from $192^{\circ}C$ to $142^{\circ}C$ for hydrogen gas sensing property in presence of UV radiation is attributed to the hydroxy radical and superoxide which was formed at the surface of $TiO_{2}$ under UV radiation.

• Journal of Sensor Science and Technology
• /
• v.17 no.2
• /
• pp.147-150
• /
• 2008

Multiple ZnO nanorod device detecting $NO_2$ gas was fabricated by sol-gel growth method and gas response characteristics were measured as a chemical gas sensor. The device is mainly composed of sensing electrode and sensing nano material. To acquire high sensitivity of the device for $NO_2$ gas it was heated by a heat chuck up to $400^{\circ}C$ The sensing part was easily made using the CMOS compatible process, for example, the large area and low temperature nano material growth process, etc. The sensors were successfully demonstrated and showed high sensitive response for $NO_2$ gas sensing.

• KSBB Journal
• /
• v.9 no.3
• /
• pp.319-324
• /
• 1994

A biosensor for the measurement of malate has been constructed by the sodium-alginate immobilized bundle sheath cell tissue of corn leaf containing malate dehydrogenase (decarboxylating) (EC 1. 1. 1. 40) on the CO2 gas-sensing electrode. The proposed tissue sensor had the linear in the range of malate concentration $5.5{\times}10^{-5}M∼2.5{\times}10^{-2}M$ with a slope of 53.5 mV/decade in 0.02M Tris-HCl buffer solution at optimum pH 8.0, and $25^{\circ}C$. A response time was 16∼18min. The present L-malate sensing tissue sensor is stable for more than one week. At pH 7.4, Km value was $0.6{\times}10^{-5}M$. The various kinds of salt did not effect the signal of malate tissue biosensor as the inhibitor. We can measure the malate by the CO2 electrode at the pH=8.0. Thus, the proposed tissue sensor will be useful for the measurement of malate.

• Journal of the Korean Chemical Society
• /
• v.38 no.3
• /
• pp.200-207
• /
• 1994

A biosensor for the measurement of L-glutamine has been constructed by immobilizing the slice of Wistar rat kidney and it's organelle on $NH_3$ gas-sensing electrode. The effects of pH, buffer solution, temperature and thickness of slice were investigated in order to optimize electrode response. The tissue sensor had the linearity in the range of L-glutamine concentration $8.0{\times}10^{-5}{\sim}1.0{\times}10^{-2} M$ with a slope of 53.8 mV/decade in 0.05 M phosphate buffer solution, pH 7.8 at $30^{\circ}C$, and optimum thickness of slice and response time were 30 ${\mu}m$ and 3∼5 min, respectively. The organelle sensor showed the linearity within L-glutamine concentration range of $1.2{\times}10^{-4}{\sim}5.0{\times}10^{-3} M$ with a slope of 54.0 mV/decade in 0.05 M phosphate buffer solution, pH 7.8 at $30^{\circ}C$, and response time was 6∼7 min, respectively. Thus, it is clear that the tissue and organelle sensor will be useful for L-glutamine measurements.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.407-412
• /
• 2007

For $VO_{2}$ sensors applicable to temperature measurement by using the nature of semiconductor to metal transition, the crystallinity, microstructure, and temperature vs. resistance characteristics were investigated systematically as a function of the annealing condition. The starting materials, vanadium pentoxide ($V_{2}O_{5}$) powders, were mixed with vehicle to form paste. This paste was screen-printed on $Al_{2}O_{3}$ substrates and then $VO_{2}$ thick films were heat-treated at $450^{\circ}C$ to $600^{\circ}C$, respectively, for 1 hr in $N_{2}$ gas atmosphere for the reduction. As results of the temperature vs. resistance property measurements, the electrical resistance of the $V_{2}O_{5}$ sensor in phase transition range was decreased by $10^{3.9}$ order. The presented critical temperature sensor could be used in fire-protection and control systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.445-452
• /
• 2010

In this paper, an attempt has been made to design the controller applicable for H.264 level3 encoder of baseline profile on full hardware basis. The designed controller module first stores the images supplied from CMOS Image Sensor(CIS) at main memory, and then reads or stores the image data in macroblock unit according to encoder operation. The timing cycle of the DMA controller required to process a macroblock is 478 cycles. In order to verify the our design, reference-C encoder, which is compatible to JM 9.4, is developed and the designed controller is verified by using the test vector generated from the reference C code. The number of cycle in the designed DMA controller is reduced by 40% compared with the cycle of using Xilinx MIG.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.2
• /
• pp.145-148
• /
• 1992

A microbial sensor for BOD (Biochemical Oxygen Demand) measurement has been developed by immobilizing Hansenula anomala in a polyacrylamide gel. The optimum pH and temperature for BOD measurement using this sensor were pH 7.0 and $30^{\circ}C$, respectively. The response time was 30 min. A linear relationship was observed between the potential and the concentration below 44 ppm BOD. The potential was reproducible within ${\pm}9%$ of the relative error when a sample solution containing 20 mg/l of glucose and 20 mg/l of glutamic acid was employed. The effect of various compounds on BOD estimation was also examined. The potential output of the sensor was almost constant for 30 days. The relative error in BOD estimation was within ${\pm}10%$.