• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.59-62
• /
• 1997

In this paper, we used Wavelet Transform to analyze EMG signals. Wavelet transform has an advantage of dividing the nonstationary signals into the high frequency and low frequency band effectively. For determining the characterized value of EMG signals, it was wavelet-transformed, absoluted, and integral-calculated. As the result, we acquired characterized value of each signals, and acknowledged the differences among them. It was concluded that the results of this study using wavelet transform could be used to powerful tool or analysis of EMG signals.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.283-286
• /
• 2002

This paper presents the straightness compensation system which is a device for improving the machining accuracy of ultra-precision machines by synchronizing the position of diamond tool tip with machine error motion. Sine it is actuated by piezoelectric actuator with highly nonlinear hysteresis characteristics, the feedback control schemes such as Proportional Integral(PI), are required and realized by measuring the displacements of diamond tool tip. for the better tracking performance, the controller was implemented using TMS320C32 32bit floating-point DSP which is fast so that the real-time control is possible. In addition, stand alone type DSP board was chosen fur the easy assembly into the ultra-precision machines. The experimental results show good command tracking performance and the motion error of the machine is satisfactorily compensated during the machining process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.384-390
• /
• 2011

The paper derives formulas for the mean-squared error distortion and resulting signal-to-noise (SNR) ratio of a fixed-rate scalar quantizer designed optimally in the minimum mean-squared error sense for a Gaussian density with the standard deviation ${\sigma}_q$ when it is mismatched to a Laplacian density with the standard deviation ${\sigma}_q$. The SNR formulas, based on the key parameter and Bennett's integral, are found accurate for a wide range of $p\({\equiv}\frac{\sigma_p}{\sigma_q}\){\geqq}0.25$. Also an upper bound to the SNR is derived, which becomes tighter with increasing rate R and indicates that the SNR behaves asymptotically as $\frac{20\sqrt{3{\ln}2}}{{\rho}{\ln}10}\;{\sqrt{R}}$ dB.

• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.89-95
• /
• 2010

This paper deals with design method of proportional-integral(PI) and feedforward controller for obtaining precise temperature and high energy efficiency of oil cooler system in machine tools. The compressor's speed and opening angle of an electronic expansion valve are controlled to keep reference value of temperature at oil outlet and superheat of an evaporator. Especially, the feedforward controller is added to suppress temperature fluctuation under abrupt disturbances. Through some experiments, the suggested method can control the target temperature within steady state error of ${\pm}0.l^{\circ}C$ and maximum overshoot $0.2^{\circ}C$ under abrupt disturbances.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.57-63
• /
• 1998

This paper describes a CMOS digital-to-analog converter to apply a newly-developed digital-to-analog conversion algorithm. The CMOS digital-to-analog converter has been designed by using 1.2$\mu\textrm{m}$ MOSIS SCMOS parameter and simulated for the performance. The simulated results have shown that the digital-to-analog converter has 200MHz of the maximum conversion rate, 7.41mW of the DC power consumption, and ${\pm}$0.08LSB of INL and ${\pm}$0.098LSB of DNL in 8-b.

• Journal of the Korean Mathematical Society
• /
• v.35 no.1
• /
• pp.177-189
• /
• 1998

In this paper, weighted Bloch spaces $B_q (q > 0)$ are considered on the open unit ball in $C^n$. These spaces extend the notion of Bloch spaces to wider classes of holomorphic functions. It is proved that the functions in a weighted Bloch space admit certain integral representation. This representation formula is then used to determine the degree of growth of the functions in the space $B_q$. It is also proved that weighted Bloch space is a Banach space for each weight q > 0, and the little Bloch space $B_q,0$ associated with $B_q$ is a separable subspace of $B_q$ which is the closure of the polynomials for each $q \geq 1$.

• Journal of the Korean Mathematical Society
• /
• v.53 no.5
• /
• pp.991-1017
• /
• 2016

In this paper we define a generalized analytic Fourier-Feynman transform associated with Gaussian process on the function space $C_{a,b}[0,T]$. We establish the existence of the generalized analytic Fourier-Feynman transform for certain bounded functionals on $C_{a,b}[0,T]$. We then proceed to establish a translation theorem for the generalized transform associated with Gaussian process.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.47-57
• /
• 2020

A new elastic-plastic-creep constraint parameter is proposed to quantify the effect of constraint on creep crack initiation times. It represents the difference between the transient elastic-plastic-creep crack-tip opening stress and the Riedel-Rice opening stress field in plane strain, which can be determined analytically. Application of the proposed parameter to a large set of creep crack growth test data using C(T) and SEN(B) specimens of Type 316H stainless steel at 550℃ shows that creep crack initiation times can be more accurately characterized by the C⁎-integral together with the proposed parameter.

• Journal of applied mathematics & informatics
• /
• v.41 no.5
• /
• pp.923-935
• /
• 2023

In this paper, we will discuss existence of solution of square-mean pseudo almost automorphic solution for fractional stochastic evolution equations driven by G-Brownian motion which is given as ^c₀D^𝛼_𝜌 Ψ_𝜌 = 𝒜(𝜌)Ψ_𝜌d𝜌 + 𝚽(𝜌, Ψ_𝜌)d𝜌 + ϒ(𝜌, Ψ_𝜌)d ⟨ℵ⟩_𝜌 + χ(𝜌, Ψ_𝜌)dℵ_𝜌, 𝜌 ∈ R. Furthermore, we also prove that solution of the above equation is unique by using Lipschitz conditions and Cauchy-Schwartz inequality. Moreover, examples demonstrate the validity of the obtained main result and we obtain the solution for an equation, and proved that this solution is unique.

• Korean Journal of Mathematics
• /
• v.18 no.4
• /
• pp.335-342
• /
• 2010

Let D be an integral domain with quotient field K,$\mathcal{I}(D)$ be the set of nonzero ideals of D, and $w$ be the star-operation on D defined by $I_w=\{x{\in}K{\mid}xJ{\subseteq}I$ for some $J{\in}\mathcal{I}(D)$ such that J is finitely generated and $J^{-1}=D\}$. The D is called a Pr$\ddot{u}$fer $v$-multiplication domain if $(II^{-1})_w=D$ for all nonzero finitely generated ideals I of D. In this paper, we show that D is a Pr$\ddot{u}$fer $v$-multiplication domain if and only if $(A{\cap}(B+C))_w=((A{\cap}B)+(A{\cap}C))_w$ for all $A,B,C{\in}\mathcal{I}(D)$, if and only if $(A(B{\cap}C))_w=(AB{\cap}AC)_w$ for all $A,B,C{\in}\mathcal{I}(D)$, if and only if $((A+B)(A{\cap}B))_w=(AB)_w$ for all $A,B{\in}\mathcal{I}(D)$, if and only if $((A+B):C)_w=((A:C)+(B:C))_w$ for all $A,B,C{\in}\mathcal{I}(D)$ with C finitely generated, if and only if $((a:b)+(b:a))_w=D$ for all nonzero $a,b{\in}D$, if and only if $(A:(B{\cap}C))_w=((A:B)+(A:C))_w$ for all $A,B,C{\in}\mathcal{I}(D)$ with B, C finitely generated.