• 보존과학회지
• /
• 제31권4호
• /
• pp.499-506
• /
• 2015

보물 제326호 이순신 유물 일괄은 장검 2점, 옥로 1점, 요대 1점, 도배 구배 2점 등 총 6점으로 구성되어 있다. 이들 유물들은 2011년 4월 28일 "충무공이순신기념관" 개관을 위해 2011년 초에 보존처리를 완료하였다. 이 때 장검 2점의 혈조 내 안료에 대한 비파괴 표면 분석을 실시한 결과 합성수지도료로 추정되었다. 본고에서는 이 합성수지도료로 추정되는 안료의 정확한 조사 및 제거에 대해 논하였다. 혈조 내 안료를 규명하기 위해 광학현미경, 전자현미경, Micro-XRF, XRD, FT-IR을 이용하여 분석하였다. 분석 결과 두께는 $10{\sim}90{\mu}m$의 단일층으로 확인되었고 성분분석 결과 Pb, Cr이 주성분을 이루고 있으며 XRD 분석을 통해 납 크로뮴 몰리브데넘 산화물로 확인되었다. 또한 접착제 성분을 확인하기 위해 FT-IR 분석을 실시한 결과 알키드 수지로 판단되었다. 이를 통해 근래에 합성수지도료로 채색한 것으로 추정된다. 이 합성수지도료는 대부분의 유기용제에 쉽게 반응하여 사용이 용이하고 금속에 영향이 없으며 쉽게 제거 가능한 아세톤을 사용하여 제거하였다. 합성수지도료 제거 과정에서 전통안료의 유무를 확인하기 위해 도료 전체를 수집하였으나 확인되지 않았다.

• 한국건축시공학회지
• /
• 제14권6호
• /
• pp.531-536
• /
• 2014

최근 국내에서는 항만 및 하천의 각종 정비 사업으로 인해 많은 양의 준설토가 발생하고 있으며, 그 중 해양 준설토의 경우 다양한 오염물질을 포함하고 있는 것으로 조사되고 있다. 하지만 이와 같이 전처리 과정 없이 재활용될 경우, 지반의 2차 오염의 문제를 야기할 것으로 우려되고 있다. 일반적으로 해양준설토의 경우 지반에 매립되는 성토와 같은 형태로의 재활용이 대부분이다. 그러므로 본 연구에서는 해양준설토의 기초적 물성을 확인하고 소성에 따른 포졸란 반응성을 평가하여 포졸란재로써의 활용가능성에 관한 기초자료를 제시하였다. 결과에 따르면 XRF 분석을 통해 측정된 해양준설토의 주성분은 55% 이상이 $SiO_2$인 것으로 나타났다. XRD 및 TG/DTA 분석결과 $100{\mu}m$ 준설토의 경우 결정구조의 변화가 발생하여 포졸란재로써 적용 가능성이 일부 확인되었다. 추가로 압축강도를 측정한 결과 $550^{\circ}C$에서 90min 열처리한 준설토의 경우 평균 압축강도가 35.55MPa로 Plain과 유사하게 측정되었다. 따라서 $550^{\circ}C$ 온도에서 90min 동안 소성과정을 거친 $100{\mu}m$ 준설토의 경우, 포졸란 반응성이 가장 높은 것으로 사료된다.

• Tuberculosis and Respiratory Diseases
• /
• 제58권2호
• /
• pp.167-173
• /
• 2005

연구배경 : 황사는 우리나라에서 주로 3월에서 5월까지 봄에 집중적으로 발생하는 대기오염의 주된 원인으로 사람에게 만성 기관지염을 악화시키고 호흡기 질환을 유발하는 것으로 알려져 있다. 황사기간 중 부유분진 중의 무기이온 성분과 금속성분의 분석에 대한 연구와 천식 등 호흡기 질환과의 연관성에 대한 연구는 많으나, 아직까지 황사의 부유분진중의 미생물에 대한 연구는 부족하다. 이 연구에서는 황사 현상시 부유분진 중에 박테리아, 진균 그리고 바이러스 등의 미생물의 검출유무와 종류를 알아보고 금속 성분 및 농도에 대해 알아보고자 본 연구를 시행하였다. 방 법 : 시료의 채취는 충남 태안군 파도리에서 cascade impactor(AN-200, USA)를 설치하여 1시간 동안 얻었으며 채취는 황사현상 기간과 비황사기간중 각각 한번씩 시행하였다. Cascade impactor에 의해 채취된 부유분진중의 미생물 검사는 cascade impactor내에 있는 여과지를 그람 양성균, 그람 음성균, 진균, 그리고 바이러스의 배지(4종, influenza, parainfluenza, adenovirus, RSV)에 옮긴 후에 배양하여 분석하였다. 금속 성분의 분석은 XRF를 이용하여 분석하였다. 결 과 : 조사 대상 지역의 황사기간과 비황사 기간 중 부유분진의 농도는 각각 80.2, $40.3g/m^3$ 이었다. 부유분진 중 XRF로 분석한 금속성분은 알루미늄과 규소, 황, 칼륨과 칼슘, 철 등 대부분의 금속이 비 황사 기간에 비해 황사 기간에서 농도가 높았다. 미생물 검사 결과상 그람 양성균은 Bacillus species, Coagulase negative staphylococcus가 자랐으며 황사기간보다 비 황사 기간동안 채취한 시료에서 오히려 더 많은 단계의 여과지에서 균이 동정되었으나 두 기 간에서 자라는 균주의 종류에는 차이가 없었다. 진균 배양은 비 황사 기간동안 Mucor species, Cladosporum, Alternaria, Aspergillus, Penicillium, Alternaria등의 진균들이 자랐으며, 황사 기간동안은 Penicillium과 Alternaria, 그리고 다른 mold form fungus들이 자랐다. 바이러스와 그람 음성균은 두 기간 다 자라는 균주는 없었다. 결 론 : 이 연구는 황사 기간동안 대기분진 중에 포함된 미생물에 대한 최초의 연구로 황사 현상시 미생물의 검출 종류는 크게 차이가 없었으나 개체수의 증가가 관찰되었으며 금속 성분의 종류는 차이가 없었으나 농도는 황사 현상시에 더 높은 수치를 보여 황사현상에 따른 호흡기 질환자의 주의와 대기오염에 대한 대책이 필요할 것으로 사료된다.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.43-48
• /
• 2016

Waste SiC powders obtained from silicon wafer sludge have very low density and a narrow particle size distribution of $10-20{\mu}m$. A scarce yield of C and Si is expected when SiC powders are incorporated into the Fe melt without briquetting. Here, the briquetting variables of the SiC powders are studied as a function of the sintering temperature, pressure, and type and contents of the binders to improve the yield. It is experimentally confirmed that Si and C from the sintered briquette can be incorporated effectively into the Fe melt when the waste SiC powders milled for 30 min with 20 wt.% Fe binder are sintered at $1100^{\circ}C$ upon compaction using a pressure of 250 MPa. XRF-WDS analysis shows that an yield of about 90% is obtained when the SiC briquette is kept in the Fe melt at $1650^{\circ}C$ for more than 1 h.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.405-411
• /
• 2012

Recovery of copper powder from copper chloride solution used in $MoO_3$ leaching process was carried out using a cementation method. Cementation is a simple and economical process, necessitating less energy compared with other recovery methods. Cementation utilizes significant difference in standard reduction potential between copper and iron under standard condition. In the present research, Cementation process variables of temperature, time, and added amount of iron scraps were optimized by using design of experiment method and individual effects on yield and efficiency of copper powder recovery were investigated using bench-scale cementation reaction system. Copper powders thus obtained from cementation process were further characterized using various analytical tools such as XRF, SEM-EDS and laser diffraction and scattering methods. Cementation process necessitated further purification of recovered copper powders and centrifugal separation method was employed, which successfully yielded copper powders of more than 99.65% purity and average $1{\mu}m$ in size.

• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.363-372
• /
• 2002

PM$_{10}$ aerosols were collected using low volume air sampler every month intervals from September 1992 to August 1991 in Seoul. These samples were analyzed for 20 trace elements (Al, As, Ba, Br, Ca, Cl, Co, Cr, Fe, K, Mn, Na, Ni, Pb, Sc, Se, Si, Ti, V and Zn) by INAA (instrumental neutron activation analysis), XRF (x-ray fuorescence spectrometer), and ICP (inductively coupled plasma). PM$_{10}$ mass concentrations higher than 70 $\mu$g/m$^3$ were 32% of 60 samples and had significantly higher concentrations in spring and winter than in summer and fall (p-value<0.001). The elements of As, Br, Cl, Ni, Pb, Se, V, and Zn are enriched by factors of 20 to 2,000 relative to their natural abundance in crustal soil. To further identify common sources of pollution-related trace elements, factor analysis was applied to the trace elements concentration data. Major sources that contribute to the atmospheric loading of these elements were found to include fossil fuel combustion, automobile and waste incineration (33.2%), metal processing industry (18.2%), and soil(29.8%).8%).

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.82-88
• /
• 2015

Objectives: This study is designed to analyze the penetration performance into ceiling materials containing asbestos of scattering prevention agents and investigate the change in penetration depth and viscosity according to the dilution rate of anti-scattering agents diluted with distilled water. Methods: Five different types of scattering prevention agents were spread on plate-type asbestos ceiling materials. The penetration depth of each coated ceiling material was measured by energy dispersive spectroscopy (EDS) analysis, based on X-ray fluorescence (XRF) results of the non-coated ceiling materials. Test equipment installed the ceiling materials and 60 minutes were collected at a flow rate of $10{\ell}/min$ at a filter of 25 mm. Results: An EDS analysis of the cross-section of ceiling materials constructed with a scattering prevention agent revealed that potassium is detected in the process of penetrating hardener solidification and this element could be an indicator for infiltration. When anti-scattering agents with different viscosities were constructed and the penetration depth was analyzed by potassium detection assessment using EDS, the depth results with viscosities of 5.0, 2.5, and 1.9 cP were 98.5, 103, and $147{\mu}m$, respectively. Penetration performance improved with decrease in viscosity. Conclusions: For asbestos ceiling materials, it is concluded that a higher dilution rate of the scattering prevention agent leads to lower viscosity, and hence a deeper penetration depth from $156{\mu}m$ to 3 mm. The asbestos anti-scattering properties according to the penetration depth will be confirmed through further study.

• 한국재료학회지
• /
• 제25권6호
• /
• pp.274-278
• /
• 2015

The possibility of using the chemical precipitation method of up-cycled ammonium paratungstate (APT) was studied and compared with the thermal decomposition method. $WO_3$ particles were synthesized by chemical precipitation method using a 1:2 weight ratio of APT: Di-water. For thermal decomposition, APT powder was heated for 4h at $600^{\circ}C$ in air atmosphere. The reaction products were characterized by X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), particle size analyzer (PSA), and field emission-scanning electron microscopy (FE-SEM). Thermogravimetric analysis (TGA) of the up-cycled APT allowed for the identification of the sequence of decomposition and reduction reactions that occurred during the heat treatment. TGA data indicated a total weight loss of 10.78% with the reactions completed in $658^{\circ}C$. The XRD results showed that APT completely decomposed to $WO_3$ by thermal decomposition and chemical precipitation. The particle size of the synthesized $WO_3$ powders by thermal decomposition with 2 h of planetary milling was around $2{\mu}m$ During the chemical precipitation process, the particle size of the synthesized $WO_3$ powders showed a round-shape with ${\sim}0.6{\mu}m$ size.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.233-240
• /
• 2019

This study analyzes the mechanical properties, including the attrition rate, of $50{\mu}m$ size yttria-stabilized zirconia (YSZ) beads with different microstructures and high-energy milling conditions. The yttria distribution in the grain and grain-boundary of the fully sintered beads relates closely to Vickers hardness and the attrition rate of the YSZ beads. Grain size, fractured surfaces, and yttrium distribution are analyzed by electronic microscopes. For standardization and a reliable comparison of the attrition rate of zirconia beads with different conditions, Zr content in milled ceramic powder is analyzed and calculated by X-ray Fluorescence Spectrometer(XRF) instead of directly measuring the weight change of milled YSZ beads. The beads with small grain sizes sintered at lower temperature exhibit a higher Vickers hardness and lower attrition rate. The attrition rate of $50{\mu}m$ YSZ beads is measured and compared with the various materials properties of ceramic powders used for high-energy milling. The attrition rate of beads appears to be closely related to the Vickers hardness of ceramic materials used for milling, and demonstrates more than a 10 times higher attrition rate with Alumina(Hv ~1650) powder than $BaTiO_3$ powder (Hv ~315).

• 한국산업보건학회지
• /
• 제8권1호
• /
• pp.50-66
• /
• 1998

This study was conducted to estimate crystalline silica contents in airborne respirable dust from various manufacturing industries and to compare analytical performance of two methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy (FTIR). For this study, various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: foundry, brick, potteries, concrete, and abrasive material, etc. Both personal and area respirable dust samples were collected using 10 mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size, polyvinylchloride (PVC) filters as collection media. In addition, total dust samples were collected side-by-side to the respirable samples. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 0500, 7500, and 7602 for dust collection and quartz analysis. In addition, bulk samples were collected and analyzed by X-ray fluorescence (XRF) for minerals. In this article, only the results obtained from foundry are reported. The results from various other industries will be published in future articles. The respirable dust concentrations from personal samples by cyclone were $0.46-1.06mg/m^3$ and those from area samples were $0.34-0.73mg/m^3$. Dust concentrations of personal samples were significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. Total dust concentration ranged $1.24-3.40mg/m^3$. The mean quartz contents estimated by FTIR and XRD in the personal respirable dust samples were 5.12% and 4.41%, respectively, without significant difference between them. For quartz analyses, the two techniques were highly correlated with $r^2$ ranged 0.803-0.920. But the results by FTIR were mostly higher than those by XRD. In addition, cristobalite was not detected by FTIR. Significant correlations between contents of crystalline silica and such minerals as $Al_2O_3$, CaO, $TiO_2$, and $K_2O$ suggest possible interferences from these minerals.