• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.14-23
• /
• 2003

This thesis proposes a sigma-delta modulator architecture with 2 Ms/s data rate and 12 bit resolution. A sigma-delta modulate has the features of oversampling and noise shaping. With these features, it can be connected with low resolution A/D converter to achieve higher resolution A/D converter. Most previous researches have been concentrated on high resolution but low data rate applications, e.g. audio applications. But, in order to be applied to various applications such as wireless data communication, researches on sigma-delta modulator architecture for higher data rate are required. The proposed sigma-delta modulator architecture has the sampling rate of 16 times Nyquist rate to achieve high data rate, and consists of a cascade of two 2nd order sigma-delta modulator to get relatively high resolution. The experimental result shows that the proposed architecture achieves 12-bit resolution at 2 Ms/s data rate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.41-48
• /
• 2002

This paper presents a 18-mW, 2.5-㎓ fractional-N frequency synthesizer with l-bit $4^{th}$-order interpolative delta-sigma ($\Delta{\;}$\sum$)modulator to suppress fractional spurious tones while reducing in-band phase noise. A fractional-N frequency synthesizer with a quadruple prescaler has been designed and implemented in a $0.5-\mu\textrm{m}$ 15-GHz $f_t$ BiCMOS. Synthesizing 2.1 GHzwith less than 200 Hz resolution, it exhibits an in-band phase noise of less than -85 dBc/Hz at 1 KHz offset frequency with a reference spur of -85 dBc and no fractional spurs. The synthesizer also shows phase noise of -139 dBc/Hz at an offset frequency of 1.2 MHz from a 2.1GHz center frequency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.35-40
• /
• 2005

This paper proposes a fractional-N phase-locked loop (PLL) frequency synthesizer using the 3rd order ${\Delta}{\sum}$ modulator for 900MHz medium speed wireless link. The LC voltage-controlled oscillator (VCO) is used for the good phase noise property. To reduce the lock-in time, a charge pump has been developed to control the pumping current according to the frequency steps and the reference frequency is increased up to 3MHz. A 36/37 fractional-N divider is used to increase the reference frequency of the phase frequency detector (PFD) and to reduce the minimum frequency step simultaneously. A 3rd order ${\Delta}{\sum}$ modulator has been developed to reduce the fractional spur VCO, Divider by 8 Prescaler, PFD and Charge pump have been developed with 0.25um CMOS, and the fractional-N divider and the third order ${\Delta}{\sum}$ modulator have been designed with the VHDL code, and they are implemented through the FPGA board of the Xilinx Spartan2E. The measured results show that the output power of the PLL is about -lldBm and the phase noise is -77.75dBc/Hz at 100kHz offset frequency. The minimum frequency step and the maximum lock-in time are 10kHz and around 800us for the maximum frequency change of 10MHz, respectively.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.4
• /
• pp.26-35
• /
• 1997

This paper proposes a multi-bit $\Sigma\Delta$ modulator arcitecture which eliminates signal clipping problem. To avoid signal clipping, the output values of intgrators are monitored and modified by a reference value. This oepration is recorded as a digital code to restore actual signal value. Due to the digital code, the substraction of feedback value from the multi-bit quantizer can be calculated by a digital adder and this simplifies dAC operation making the accurate DAC of conventional multi-bit $\Sigma\Delta$ modulator scheme unnecessary. These features make N-th modulator can be implemented by sharing an integrator among N stages to decrease the required chip area. As an experimental example, a 4th order .sum..DELTA. modulator with oversampling ratio of 64 was simulated to show over 130 DB SNR at rail-to-rail input sinusoidal signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1701-1705
• /
• 2004

This paper presents a design and analysis of electromechanical sigma-delta modulator for MEMS gyroscope, which enables us to control the proof mass and to obtain an exact digital output without additional A/D conversion. The system structure and the circuit realization of the sigma-delta modulation are simpler than those of the analog sensing and feedback circuit. Based on the electrical sigma-delta modulator theory, a compensator is designed to improve the closed loop resolution of the sensor. With the designed compensator, we could obtain enhanced closed-loop performances of the gyroscope such as larger bandwidth, lower noise, and digital output comparing with the results of analog open-loop system.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.156-159
• /
• 2000

This paper presents a low-voltage, low-power $\Sigma$Δ modulator for audio applications. It use a simple second-order fully-differential switched-capacitor structure with a sampling frequency of 12.5 MHz and oversampling ratio of 256. It operates from a single 1.5V Bower supply and dissipates 2 ㎽. Extensive simulations using 0.25 ${\mu}{\textrm}{m}$ CMOS Process parameters show that it achieves 96㏈ peak SNDR in a 22 KHz bandwidth.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.10-17
• /
• 2012

This paper presents a clock regenerator using two $2^{nd}$ order ${\sum}-{\Delta}$ (sigma-delta) modulators for wide range of dividing ratio as defined in HDMI standard. The proposed circuit adopts a fractional-N frequency synthesis architecture for PLL-based clock regeneration. By converting the integer and decimal part of the N and CTS values in HDMI format and processing separately at two different ${\sum}-{\Delta}$ modulators, the proposed circuit covers a very wide range of the dividing ratio as HDMI standard. The circuit is fabricated using 0.18 ${\mu}m$ CMOS and shows 13 mW power consumption with an on-chip loop filter implementation.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.217-226
• /
• 2016

We propose an architecture that reduces the power consumption and active area of such a modulator through a reduction in the number of active components and a simplification of the topology. The proposed architecture reduces the power consumption and active area by reducing the number of active components and simplifying the modulator topology. A novel second-order loop filter that uses a single operational amplifier resonator reduces the number of active elements and enhances the controllability of the transfer function. A trapezoidal-shape half-delayed return-to-zero feedback DAC eliminates the loop-delay compensation circuitry and improves pulse-delay sensitivity. These simple features of the modulator allow higher frequency operation and more design flexibility. Implemented in a 130 nm CMOS technology, the prototype modulator occupies an active area of $0.098mm^2$ and consumes 5.23 mW power from a 1.2 V supply. It achieves a dynamic range of 62 dB and a peak SNDR of 60.95 dB over a 15 MHz signal bandwidth with a sampling frequency of 780 MHz. The figure-of-merit of the modulator is 191 fJ/conversion-step.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2503-2510
• /
• 2015

This paper presents a single-phase energy measurement IC to measure electric power quantities. The entire IC includes two programmable gain amplifiers (PGAs), two ${\sum}{\Delta}$ modulators, a reference circuit, a low-dropout (LDO) regulator, a temperature sensor, a filter unit, a computation engine, a calibration control unit, registers, and an external interface block. The proposed energy measurement IC is fabricated with $0.18-{\mu}m$ CMOS technology and housed in a 32-pin quad-flat no-leads (QFN) package. It operates at a clock speed of 4,096 kHz and consumes 10 mW in 3.3 V supply.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.96-100
• /
• 2015

Adaptive background gain calibration loop for multi-lane serial links is proposed. In order to detect and cancel gain mismatches between lanes, a single digital loop using a ${\sum}{\Delta}$ ADC is employed, which provides a real-time adaptation of gain variations and is shared among all lanes to reduce power and area. Evaluation result showed that gain mismatches between lanes were well calibrated and tracked, resulting in timing budget at $10^{-6}$ BER increased from 0.261 UI to 0.363 UI with stable loop convergence.