• 한국재료학회지
• /
• 제16권1호
• /
• pp.1-4
• /
• 2006

Biodegradable $\beta$-tricalcium phosphate ( $\beta$-TCP)/poly(lactide-co-glycolide) (PLGA) composites were synthesized by in-situ polymerization with microwave energy. The influence of the $\beta$-TCP content in $\beta$-TCP/PLGA composites on the molecular weight, crystallinity, microstructure and mechanical properties was investigated. As the molecular weight of composites decreased, the $\beta$-TCP content increased up to 10 wt.%, while the excess addition of the $\beta$-TCP content above 10 wt.% the molecular weight increased with increasing of the $\beta$-TCP content. This behavior would be due to the superheating effect or nonthermal effect induced by microwave energy. It was found that the bending strength and Young's modulus of the $\beta$-TCP/PLGA composites was proportional to the molecular weight of PLGA. The bending strength of the $\beta$-TCP/PLGA composites ranged from 18 to 38 MPa, while Young's modulus was in the range from 2 to 6 GPa.

• 대한기계학회논문집A
• /
• 제38권4호
• /
• pp.371-377
• /
• 2014

조직 공학에 있어 인공지지체는 손상된 조직 및 기관의 기능을 재생하기 위한 거푸집으로 제공되며 3 차원 구조물이다. 인공지지체의 재료 중에서 폴리카프로락톤(Polycaprolactone, PCL)과 삼인산칼슘(${\beta}$-tricalcium phosphate, ${\beta}$-TCP)은 생분해성과 생체적합성을 가지고 있다. 본 연구에서는 다축 인공지지체 제작 시스템을 이용하여 3 차원 PCL, blended PCL(60 wt %)/${\beta}$-TCP(40 wt %), 그리고 ${\beta}$-TCP 인공지지체를 제작하였다. 제작된 인공지지체는 주사전자현미경 분석을 통해 $600{\pm}20{\mu}m$의 공극 크기로 잘 제작되었다. 기계적 특성 평가를 통해 3 차원 PCL, blended PCL(60 wt %)/${\beta}$-TCP(40 wt %), 그리고 ${\beta}$-TCP 인공지지체의 효과는 분석되었다. 게다가 Saos-2 세포를 이용한 in vitro 연구를 수행하여 세포 증착 및 증식과 같은 세포 거동에 의한 3 차원 인공지지체의 효과를 확인하였다. 요컨대 3D blended PCL(60 wt %)/${\beta}$-TCP(40 wt %) 인공지지체가 압축 강도와 생체적합성 그리고 골전도성에 있어서 인체의 해면골에 더욱 적합하였다. 따라서 3D 인공지지체의 제작에 있어 PCL과 ${\beta}$-TCP를 혼합하는 것은 효과적인 골 재생을 위해 촉망되는 전략이 될 것이다.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.791-797
• /
• 2014

Abstract Scaffold used as a carrier of the cell has been actively conducted using plenty of technology in tissue engineering. ${\beta}$-tricalcium phosphate (${\beta}$-TCP) material has shown good biocompatibility and osteoconductive ability when it was implanted as a bone graft substitute in osseous defect in human and animal studies for bone regeneration. In this study, we fabricated the blended polycaprolactone (PCL) and ${\beta}$-TCP scaffold by the polymer deposition system (PDS). The PCL/${\beta}$-TCP scaffold was fabricated at a temperature of $110^{\circ}C$, pressure of 650 kPa, and scan velocity of 100 mm/sec. The Overall geometry and size of the scaffold were fixed circle type with a diameter of 10 mm and a height of 4 mm. PCL/${\beta}$-TCP scaffold was observed by scanning electron microscopy. Cell attachment and proliferation of the scaffold containing 30 wt% ${\beta}$-TCP was superior to those containing 10 wt% and 20 wt% ${\beta}$-TCP.

• 생명과학회지
• /
• 제28권10호
• /
• pp.1220-1232
• /
• 2018

본 연구는 토끼의 상악동에 Bio-Oss와 ${\beta}-TCP$를 이식한 후 골 재생 과정을 조직학적으로 비교하기 위하여 수행되었다. 12마리의 수컷 토끼를 4마리씩 3군으로 구분하였다. 토끼의 양쪽 상악동 점막을 거상한 후 한쪽은 Bio-Oss를 이식하였고, 다른 쪽은 ${\beta}-TCP$를 이식한 후 본래의 골편으로 창을 봉합하였다. 2주, 4주 및 8주 후에 토끼를 희생시키고 조직절편을 만든 후 Bio-Oss군과 ${\beta}-TCP$군의 골 재생 양상을 비교하였다. 조직계측학적 분석을 위하여 각각의 조직절편에 hematoxylin-eosin, Masson trichrome 및 tartrate-resistant acid phosphatase 염색을 하였고, proliferating cell nuclear antigen (PCNA), type I collagen 및 osteocalcin의 발현 양상을 비교하기 위하여 면역조직화학 염색을 하였다. 광학현미경 시야에서 계측프로그램을 이용하여 계측하고 분석하여 다음과 같은 결과를 얻었다. Bio-Oss군과 ${\beta}-TCP$군 모두 2주군에서 초기 골 형성이 시작되었고, 4주군에서는 각 이식재 입자의 표면에 형성된 다량의 신생골이 관찰되었으며, 8주군에서는 신생골의 골량이 더 증가되어 있었고 층판골과 골수조직도 관찰되었다. 신생골의 양은 4주군까지 두 군이 비슷하였으나, 8주군에서는 ${\beta}-TCP$군에서 유의한 증가가 계측되었다. 이식재의 양은 4주군부터 8주군까지 ${\beta}-TCP$군에서 유의하게 감소되었으며, 파골세포의 수는 4주군에서 8주군까지 ${\beta}-TCP$군에서 유의하게 증가되어 있었다. PCNA에 대한 면역반응성은 8주군에서 감소되었지만 두 군간의 유의한 변화는 없었다. Type I collagen의 발현은, 2주군에서는 ${\beta}-TCP$군에서 유의하게 증가되었지만, 8주군에서는 Bio-Oss군에서 유의한 증가가 관찰되었다. Osteocalcin에 대한 면역반응성은 8주까지 증가되었으며 두 군간의 유의한 차이는 없었다. 이러한 조직학적 결과들은 임플란트를 위한 이식재의 선택에 도움을 줄 수 있다. 이상의 결과들을 종합하면 Bio-Oss와 ${\beta}-TCP$는 모두 검증된 이식재 이지만, 토끼의 상악동 거상술에서는 ${\beta}-TCP$가 좀 더 우수한 골 재생 결과를 보였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권5호
• /
• pp.417-433
• /
• 2006

Purpose : Platelet rich plasma (PRP) is an autologous material with many growth factors, such as BMPs, PDGF, $TGF-{\beta}_1$, $TGF-{\beta}_2$, VEGF, and IGF, facilitating bone healing process. The prominent osteoconductive activity and the biodegradable nature of beta-tricalciumphosphate (${\beta}-TCP$) for bone grafts in animal experiments have been reported. The purpose of this study was to evaluate the effect of PRP on the osteogenesis of ${\beta}-TCP$. Materials & Methods : Two artificial calvarial bone defects were made in 32 rabbits which were divided into 2 groups. In one group of 16 rabbits, autogenous bone / ${\beta}-TCP$ was grafted on each side of cranial bone defect. In the other group of 16 rabbits, mixture of ${\beta}-TCP$ and PRP / PRP alone was grafted on each side of the cranial bone defect. The animals were sacrificed at 2, 4, 8, and 12 weeks after surgery. The specimens were harvested and examined histologically and immunohistochemically by the expression of BMP2/4/7, PDGF, VEGF and $TGF-{\beta}_1$. Results : The mean volume of new bone formation was significantly higher at 4, 8, 12 weeks in autogenous graft than that in ${\beta}-TCP$. The BMP2/4 expression was significantly higher at 4 weeks in autogenous bone graft and at 4 weeks in mixture of ${\beta}-TCP$ and PRP and at 12 weeks in ${\beta}-TCP$. The expression of BMP7, PDGF, VEGF and $TGF-{\beta}_1$ showed no significant difference in autogenous, ${\beta}-TCP$, mixture of ${\beta}-TCP$ and PRP, and PRP alone during grafted bone regeneration. Conclusion : The results showed that PRP had no additional value in promoting healing process of ${\beta}-TCP$ grafts.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.287-295
• /
• 2009

$\beta$-Tricalcium phosphate ($\beta$-TCP) particles reinforced bioresorbable plastics poly-L-lactide (PLLA) composites were prepared by injection molding. The nominal weight ratio of $\beta$-TCP was selected as 5, 10 and 15%. In order to clarify effects of the PLLA crystallinity on the mechanical properties, the specimens were heat treated isothermally. Results of differential scanning calorimetry indicated that the PLLA crystallinity increased with increasing heat treatment temperature. Bending and compressive tests were conducted on the specimen with different $\beta$-TCP contents and crystallinities. The results show that the bending and compressive moduli increased with increasing $\beta$-TCP contents and crystallinity. On the other hand, bending strength decreased with increasing $\beta$-TCP contents. Maximum bending strength was obtained at the heat treatment of $70^{\circ}C$ for 24 h, whereas compressive 0.2% proof strength increased with increasing heat treatment temperature. This difference is attributed to the difference in the microscopic damages.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.676-680
• /
• 2006

The biodegradable $\beta$-tricalcium phosphate ($\beta$-TCP)/poly(lactide-co-glycolide) (PLGA) composites were synthesized by in situ polymerization with microwave energy. The degradation behavior of $\beta$-TCP/PLGA composite was investigated by soaking in simulated body fluid (SBF) for 4 weeks. The molecular weight of the $\beta$-TCP/PLGA composites decreased with soaking time until week 2, whereas the loss rate of molecular weight reduced after week 2. The incubation time was needed for the degradation of the $\beta$-TCP, indicating that the $\beta$-TCP should be detached from the PLGA matrix and then degraded into SBF solution. The studies of mass loss of the composites with the soaking time revealed that the degradation behavior of PLGA would be processed with the transformation from the polymer to the oligomer followed by the degradation. Morphological changes, whisker-like, due to transformation and degradation of polymer in the composites were observed after week 2. On the basis of the results, it found that the degradation behavior of $\beta$-TCP/PLGA composites was influenced by the $\beta$-TCP content in the composites and the degradation rate of the composites could be controlled by the initial molecular weight of PLGA in the composites.

• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.214-218
• /
• 2000

Hydroxyapatite (HA) and $\beta$-tricalcium phosphate ($\beta$-TCP) are bio-compatible materials with bones and teeth. HA has been widely applied as bone substitutes because of chemical stability in vivo, while $\beta$-TCP has higher resorbability than HA when the material is implanted in a bone defect. In the present study, both HA and $\beta$-TCP porous ceramics were soaked in the simulated body fluid in order to investigate the reaction between the materials and the fluid. After the soaking test, carbonate hydroxyapatite was formed on HA surface at 1 week, and then the amount of precipitates increased with increasing period of the soaking test. While $\beta$-TCP was not dissolved in the fluid, carbonate hydroxyaopatite was also formed on $\beta$-TCP surface after 12 weeks, and the amount of precipitates was less than that on HA. In vitro behavior of HA was similar to that in vivo, but in vitro behavior of $\beta$-TCP was not similar to that in vivo.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권1호
• /
• pp.19-25
• /
• 2011

Purpose: Addition of platelet-rich plasma (PRP) and platelet-rich fibrin (PRF) to grafting material has become widely accepted additively for bone regeneration because it can raise high expectations on it's clinical potential. The aim of this study was to evaluate the efficacy of PRP and PRF on early bone regeneration of rabbits when used in combination with beta tricalcium phosphate. Methods: In eight rabbits, the calvarium was exposed and the two marrows were penetrated. After then these artificial bone defects were augmented with ${\beta}$-TCP or ${\beta}$-TCP with PRP or ${\beta}$-TCP with PRF and covered. The animals were sacrificed after four and eight weeks. Histologic findings were observed under the light-microscope and histomorphometric analysis was performed by measuring calcified area of new bone formation within the CSD. Results: They demonstrated that new bone formation tended to be produced along the outline of graft materials. More amounts of newly bone was regenerated in ${\beta}$-TCP only and in combination of${\beta}$-TCP with PRF and it was statistically significant. In contrast, there was no significant difference between nothing apply and ${\beta}$-TCP with PRP groups in the relative amounts of newly mineralized bone. Conclusion: Within the limitation of this study, it can be concluded that PRF in combination with ${\beta}$-TCP showed a positive effect on bone regeneration and statistically it was significant.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권4호
• /
• pp.282-291
• /
• 2004

Pure-phase beta-tricalcium phosphate(${\beta}$-TCP) proved to be a bone regeneration material, providing the patient with vital bone at the defect site in a reasonable time, making a second surgical procedure for bone harvesting unnecessary. This study compares bone healing and BMP 2/4 expression in cranial defects in rabbits grafted with autogenous bone and ${\beta}$-TCP. Thirty New Zealand White rabbits was divided into 3 group of 10 animals each. Bilateral calvarial defects were made in the parietal bones of each animal. ${\beta}$-TCP placed in one defect and the other defects was filled with autogenous bone. The animal were sacrificed at 4, 8 and 12 weeks. Immunohistochemical analysis was used to investigate the expression of BMP 2/4. 1. The new bone formation around autogenous bone from 4 weeks and ${\beta}$-TCP from 8 weeks. 2. In autogenous bone graft, BMP 2/4 expression was decreased from 4 to 12 weeks. 3. In ${\beta}$-TCP graft, BMP 4 expression was increased from 8 to 12 weeks. But, BMP 2 was observed from 12 weeks. This study showed that bone healing, regeneration and, BMP 2/4 expression are delayed in grafted ${\beta}$-TCP than autogenous bone.