The palpation of spinous process and transverse process of vertebra are important part of the assesment and treatment from Orthopedic manual therapy. But the palpation area is descriptive differently each of literatures. So we generally got these outcomes. : There are C2, C3, C4 and C6 process as a bony landmarks and these are important part of establish the precise location of pain appears from cervical spine. Even though C7 process regard a prominent part, it is hard to distinguish C6 and process of T1. Thru that differentiation, grab the patient's forehead and try them cervical and hyper-extension check any movement of process or put on the fingers on C7 preocess and check the movement. The palpation of thoracic spine process is the land mark which determines general level orientation in the spine easily, there are T2, T7 spinous process. However, It is depends on how do you test the patient's arm when you palpate it and it can effect on spinous process. The transverse process of C1 is the only spot for palpation in cervical spine, and T1-3, T12 transverse process can palpate it when it stands on the process. The end of T4-6, T11 is placed on middle on vertebra of transverse process and transverse process. T7-9, T10 transverse process is place on same position as spinous process which is upper part of the spine.