Mines are classified as the attack, defense and protect mine depending on laying position. In case of the defense and protect mine for protecting the major ports, it is important to predict that mines are laid position for a safe maneveuring of friendly ships. Furthermore, the marine environment affects mines laying position. Therfore, this paper is studied on a prediction of mines laying position through the prediction of the marine environment.

Since the optimized use of sonar systems for target tracking is a practical problem for naval operations, the measure of mission achievability is needed for preparing efficient sonar-maneuver tactic. In order to quantify the mission achievability or Measure Of Effectiveness(MOE) for given sonar-maneuver tactics, we developed and tested a simulation algorithm. The proposed algorithm for tracking is based on Measure Of Performance(MOP) for localization and tracking system of sonar against target. Probability of Detection(PD) using steering beam patterns referenced to the aspect angle of sonar is presented to consider the tracking-performance of sonar. Also, the integrated software package, named as Optimal Acoustic Search Path Planning(OASPP) is used for generating sonar-maneuver patterns and vulnerability analysis for a given scenario. Through simulation of a simple case for which the intuitive solution is known, the proposed algorithm is verified.

Helmet Mounted Display(HMD) has great advantages on the navigation and mission symbologies for the pilot's forward looking display and, therefore, has been remarkably drawing attention as the up coming display of the next generation aircraft. The essential technology to process the Line of Sight-Foward(LOS-F) data in real-time is to estimate exact helmet situation and position. In this paper, we research a acoustic helmet tracking technique. For the reason that mechanical acoustic noises might interfere with Helmet Tracking System(HTS) and unnecessary acoustic noises are inevitable when using acoustic technique, this approach has not been adapted. In order to overcome this problem. We propose that acoustic wave of which the wave length is longer than audio frequency and, especially, we used beating signal envelope which is composed of two close high frequency.

In this paper, we described the study on back-radiation level improvement of IFF antenna after briefly describing a design of IFF antenna to distinguish the target as the sub-antenna of surveillance radar. The proposed IFF antenna was minimized a size with use all-in-one power divider as a two-channel IFF antenna forming sum and difference pattern. The method for back-radiation level reduction was studied, and the identified method through the simulation confirmed the decrement throught the measurement.

By virtue of Rec. ITU-R P.1546 and geography information system, interference analysis for the fixed wireless system and radar has been presented based upon the frequency-distance rules with minimum coupling loss, and a comprehensive methodology for assessing interoperability between systems was examined in terms of received signal, protection ratio, frequency dependent rejection. Also to find the antenna gain from a discrimination angle, a useful S-I plane was introduced based on signal and interference vectors derived from the real map with geographic information. To show some computational results, geography information on the map was taken for the given area, and field strength and path profile were illustrated for the radar and fixed wireless system operating at 2.7 GHz, for convenience. In addition the interference effect of receiver was also checked as a function of radar beam direction including protection ratio and frequency dependent rejection. The developed interference analysis can be actually applied to evaluate interoperability for wireless systems in the VHF and UHF bands.

To obtain the requirements of capability and analyze mission loads for weapon systems which are in process of development, Operational Mode Summary/Mission Profile(OMS/MP) should be documented in advance. In this paper, we have proposed a systematic and practical OMS/MP model processes of a weapon mounted combat vehicle for analyzing power and energy strategy. The wartime and peacetime OMS/MP of a hybrid wheeled combat vehicle which is mounted with an anti-tank guided weapon(ATGW) is also presented as its application.

TICN, a next-generation tactical communication network based on a wireless network, acts as the backbone of the whole network. TICN requires the routing which takes both survivability of passage, reliability, and safety of wireless link into consideration. A tactical network like TICN may maintain the passage for just a short period of time due to topology's frequent changes; In this process all nodes, dependent on batteries for their necessary energy, are restricted by batteries' durability in due course. To overcome this shortcoming, the up-to-date protocols consider only either of diminishing or balancing out energy consumptions. Thus there was a limitation to enhancing both throughput and energy efficiency. The thesis proposes a protocol which regards both throughput and energy efficiency, and enhances node survivability by means of minimizing and balancing energy consumption of the whole network. The protocol brings out an improvement in throughput and makes each node's energy usage more effective.

FDB(Feature DataBase) attributes have been produced by using the resource data prior to the year 2002. Due to this reason, the attributes need to be updated to the up-to-date ones. In this regards, this study focuses on the way of finding areas whose attributes need to be updated. Forest and crop classes were chosen as target classes among FDB features. MODIS Landcover data and FDB are, first, compared to detect the changed forest and crop areas from 2001 to 2008. Then, vegetation vitality changes are analyzed using MODIS annual NDVI data. Based on the change detection and the vegetation vitality analysis, the index of area selection for updating FDB attributes is proposed in this study.

In this paper, we have proposed a vapor cycle refrigeration system as a cooling system to provide cooling air to the aircraft external reconnaissance stores. In the proposed vapor cycle system, receiver which prevents refrigerant from subcooling was eliminated and thermal expansion valve was replaced with electronic expansion valve. The vapor cycle refrigeration system is aimed to provide cooling air to the reconnaissance stores which is added to the aircraft in the form of external store. The wide temperature range of ambient air from the flight conditions can decrease the cooling performance and can make the refrigeration system unstable in low ambient temperature. Performance characteristics of the vapor cycle refrigeration system has been experimented under air conditions which is derived from the flight envelope. From the experiments, the vapor cycle refrigeration system has been proved to provide enough cooling air to the reconnaissance equipment and to be stable under all the flight conditions.

This paper describes the fundamentals, design, realization and test results of a BPSK(Bi Phase Shift Keying) transceiver for the direction finding proximity fuze sensor for anti-aircrafts or air missiles. The BPSK transceiver for the direction finding fuze sensor has been designed to detect a moving target by Doppler signal processing with the code correlation method and to distinguish direction by comparing received powers of each Doppler signal from adjacent three receiving antennas. The electrical and ESS(Environmental Stress Screening) tests of the BPSK transceiver showed satisfactory results and target detection and direction finding performances proved to be successful through dynamic operation tests by 155 mm gun firing.

Electro Otical Tracking System(EOTS) is required for a rapid movement as well as the stabilization of Line-Of-Sight(LOS). In order to achieve these two goals, this paper presents a position and velocity driving profile generation method from the constant acceleration and deceleration profile according to the current state, enabling a fast and smooth trajectory even if the target position changes during the movement of LOS. Simulation and experimental results reveal that the settling time could be reduced significantly by adopting the present position control scheme.