Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Effect of Cutting Conditions on Surface Roughness in CNC Lathe C-axis Milling Cutting

CNC선반 C축 밀링가공에서 표면 거칠기에 미치는 절삭조건의 영향

  • 신국식 (한국폴리텍VII대학 진주캠퍼스 컴퓨터응용기계과)
  • Published : 2012.06.30
⟨ Previous Next ⟩

Abstract

For domestic aircraft industry, not mass production of components is limited, small production scale of the order is made by part because many kinds of hundreds of thousands of kinds of small quantity batch production system are taking. But the high reliability and stability are required during the processing because they require high precision parts are required. It is found that when C-axis rotation speed was increased, the diameter of the cutting tool decreased with increasing surface roughness, while the turn-mail feed rate was increased with increasing the surface roughness.

Keywords

References

  1. J. N. Greenhow, C. Rubenstein, "The Dependence of Cutting Force on Feed and Speed in Orthogonal Cutting with Worn Tools", Int. J. Mach. Tool Des. Res. Vol. 9, pp. 1-16, 1969.
  2. V. Solaja, "Wear of Carbone tools and Surface Finish Generated Finish Turing of Steel", Wear Vol. 2, pp. 40-58, 1958.
  3. K. V. Olson, "Surface Roughness on Turned steel Componented and the Relevant Mathematical Analysis", prod Ergr47, pp. 595-606, 1968.
  4. V. Solasa, "Wear of Carbide TODIS and Surface Finish Turning of steel" Wear2, pp. 40-58, 1958.
  5. M. C. Shaw, "Optimum Selection of Machine Tool: Speed and Feeds", Int. J. Mech. Des. Res. Vol. 5, pp. 25-34, 1965.
  6. J. C. Bae, I. O. Hwang, I. S. Kang, J. S. Kim and M. C. Kang, "Environmentally Conscious High Speed Machining Characteristics of Aluminum Alloys(AC4C.1)", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 3, No. 1, pp. 22-27, 2004.