• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1872-1874
• /
• 2005

• 대한화학회지
• /
• 제17권1호
• /
• pp.15-19
• /
• 1973

${\alpha}-HIBA$를 용리제로한 양이온 교환 수지통을 사용하여 철, 코발트, 니켈, 이트륨 및 희토류 원소와 같은 여러가지 금속의 공존이온으로 부터 티탄, 니오브 및 지르코늄을 함께 분리하는 방법을 발전시켰다. 본 연구의 결과 르코늄의 꼬리끌기현상은 용리전에 행한 수산화침전에 기인하고 있음을 알았다. 예를 들면 지르코늄을 수산화나트륨으로 침전시킬때 다른 저자들의 보고와는 달리 지르코늄은 심한 꼬리끌기현상을 나타냄을 알았다. 본 연구에서는 이러한 꼬리끌기현상을 없애고 또한 이 이온들을 함께 분리하기 위한 목적으로 이온교환법을 적용하였다. 본 방법을 사용한 결과 조사된 지르코늄으로부터 생성된 $^{90m}Y$와 $^{90}Y$을 방사화학적 순도로 분리할 수 있었다.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.707-712
• /
• 1990

The basic zirconium sulfate was prepared from ZrOCl2.8H2O and H2SO4 in the 9$0^{\circ}C$ aqueous solution. The pH and amount of unreacted zirconium in the solution that reacton had completed was 0.2 and 10%. As the pH was increased to 1.4 by NH4OH theresulting precipitates were the mixtures of the basic zirconium sulfate and the zirconium hydroxide although the precipitates were recovered completely. The thermal decomposition behavior of this sample has been examined by thermal analysis(TG-DTA), X-ray diffraction study, infrared spectroscopy and sulfur analysis. As a result, it was found that the precipitates have perfectly been decomposed at 85$0^{\circ}C$ accompanying to the release of a molecule of water below 25$0^{\circ}C$ and 85% sulfate at about $600^{\circ}C$. The thermally decomlposed products were initially amorphous phase, which were become metastable tetragonal phase with increment of temperature and finally transformed to the stable monoclinic phase at 100$0^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1751-1755
• /
• 2007

The interaction of ammonium hydroxide (NH4OH) with zircaloy-4 (Zry-4) was investigated using X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) methods. In order to study the surface chemistry of NH4OH/Zry-4 system, the binding energies of N1s, O1s and Zr3d electrons were monitored. The N1s peak intensity was remarkably increased by following cycles of Ar+ sputtering of NH4OH dosed Zry-4 surface at room temperature. Because the nitrogen stayed under the subsurface region was diffused out onto the Zry-4 surface after oxygen concentration was decreased. These could be occurred after the surface oxygen was diffused into the bulk or desorbed out from the surface until Ar+ fluence was 6.0 × 1016 Ar+/cm2 then the surface was relatively atomic deficient state. The O1s peak intensity was decreased by stepwise Ar+ sputtering. After many cycles of Ar+ sputtering, the peak intensities of Zr3d peaks did not change much but the shape of the peak clearly did change. This implies that the oxidation state of zirconium was changed during stepwise Ar+ sputtering of NH4OH/Zry-4. The Zr3d peak intensity of zirconium nitride (ZrNx) increased as the intensity of N1s (from zirconium nitride) increased but the Zr3d peak intensity of zirconium oxide (ZrOx) decreased due to the depopulation of the oxygen species on the surface region. We also observed that the peak intensity of Zr4+ was nearly same after Ar+ sputtering processes but the peak intensity of metallic zirconium increased compared to that of before the sputtering process was performed.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.199-203
• /
• 2004

Fibrous arsenic (As) adsorbent was synthesized by loading zirconium (Zr) on fibrous phosphoric adsorbent that was directly synthesized by radiation-induced graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid on polyethylene-coated polypropylene nonwoven fabric. Zirconium reacted with phosphoric acid grafted in the polyethylene layer. Zirconium density of the resulting adsorbent was 4.1 mmol/g. The breakthrough curve of As(V) adsorption was independent of the flow rate up to $1300\;h^{-1}$ in space velocity. The total capacity of As(V) was 2.0 mmol/g-adsorbent at pH of 2. The adsorbed Zr(IV) could be evaluated by 0.4 M sodium hydroxide solution because negligible Zr(IV) could be found in the eluted solution.

• Food Science and Biotechnology
• /
• 제17권3호
• /
• pp.651-654
• /
• 2008

In order to enhance the efficacy of norovirus detection by reverse transcriptase-polymerase chain reaction (RT-PCR) and nested PCR, this study developed a norovirus mRNA concentration method using poly oligo dT-conjugated magnetic beads. An efficient norovirus detection protocol was performed on commercial ham using 2 viral elution buffers (glycine buffer and Tris beef extract buffer) and 2 concentration solutions [polyethylene glycol (PEG) and zirconium hydroxide]. The different approaches were verified by RT-PCR and nested PCR. This method was performed on ham in less than 8 hr by artificial inoculation of serial dilutions of the virus ranging from 1,000 to 1 RT-PCR unit/mL. The viral extraction and concentration method had 10-fold higher sensitivity using the combination of Tris beef extract buffer and PEG as compared to glycine buffer and zirconium hydroxide. This method proved that RT-PCR and nested PCR have the sensitive ability to detect norovirus in commercial ham, in that norovirus was successfully detected in artificially contaminated samples at a detection level as low as 1-10 RT-PCR unit/mL. Overall, such a detection limit suggests this protocol is both quick and efficient in terms of its potential use for detecting norovirus in meat products.

• 한국염색가공학회지
• /
• 제31권1호
• /
• pp.33-41
• /
• 2019

In this report, nano-sized catalysts were introduced onto fabric surface to eliminate toxic chemicals assisted by physical adsorption. For chemical removal of toxic compounds, a series of zirconium-containing catalysts were synthesized and treated on fabric to catalyze the hydrolysis and oxidation of target molecules. Antimicrobial was also introduced for the research purpose to prove the compatibility of as-synthesized catalysts with other solutions. Zirconium ligated with hydroxyl group and MOF(Metal-Organic Frameworks) were exploited as catalyst for removal of toxic compounds, while zinc complex was used for an antimicrobial to culminate in a chemical shield. Once fabrics were functionalized, fabrics were washed 2 or 5 times for a washing durability test. The amount of catalyst in textile were measured by ICP-MS and weight increasing ratio of fabrics.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.361-368
• /
• 1990

The properties of the powder of ZrO2＋3m/o Y2O3 system prepared by co-precipitation method at the pH values of 7, 9, 10 and 11 were investigated. ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent. Zirconium hydroxide near by Zr(OH)4 structure showed more excellent crystallinity and lower formation temperature of tetragonal ZrO2. In the range of this study, cubic ZrO2 was not formed and stability of tetragonal ZrO2 prepared in the conditiion of pH 7 was most excellent. Average particle sizes and specific surface areas of tetragonal ZrO2 powders, prepared as calcining amorphous zirconium hydroxides at $600^{\circ}C$ for 1h, were 0.6-0.8${\mu}{\textrm}{m}$ and 45-70$m^2$/g, respectively.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.210-220
• /
• 1989

The properties of the powder of Al2O3-15v/o ZrO2(＋3m/o Y2O3) system prepared by co-precipitation method at the pH values of 7, 9, 10 and 11 were investigated. Al2(SO4)3.18H2O, ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent. Zirconium hydroxide decreased the specific surface area of aluminum hydroxide of AlOOH type, while increased the specific surface area of aluminum hydroxide of Al(OH)3 type, and formed co-network structure of Al-O-Zr type with the aluminum hydroxides. The rate of transition to $\alpha$-Al2O3 from co-precipitated materials occurred in the order of 7≒10, 9 and 11 of pH values. Al2O3 and ZrO2 interacted to bring about coupled grain growth, and the growth of ZrO2 crystallite size rapidly occurred within $\theta$-Al2O3 matrix. Segregation did not occur in the system Al2O3-15v/o ZrO2(＋3m/o Y2O3) and Y2O3 acted as a stabilizer to ZrO2. The lattice strain of tetragonal ZrO2 was increased by the constraint effect of Al2O3 matrix.

• 공업화학
• /
• 제34권2호
• /
• pp.199-205
• /
• 2023

Arsenic is a highly toxic element, and its contamination is widespread around the world. The natural materials with high selectivity and efficiency toward pollutants are important in wastewater treatment technology. In this study, the mesoporous synthetic hectorite was synthesized by facile hydrothermal crystallization of gels comprising silica, magnesium hydroxide, and lithium fluoride. Additionally, the naturally available clay was modified using zirconium at room temperature. Both synthetic and modified natural clays were employed in the removal of arsenate from aquatic environments. The materials were fully characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transform-infrared (FT-IR) analyses. The synthesized materials were used to remove arsenic (V) under varied physicochemical conditions. Both materials, i.e., Zr-bentonite and Zr-hectorite, showed high percentage removal of arsenic (V) at lower pH, and the efficiency decreased in an alkaline medium. The equilibrium-state sorption data agrees well with the Langmuir and Freundlich adsorption isotherms, and the maximum sorption capacity is found to be 4.608 and 2.207 mg/g for Zr-bentonite and Zr-hectorite, respectively. The kinetic data fits well with the pseudo-second order kinetic model. Furthermore, the effect of the background electrolytes study indicated that arsenic (V) is specifically sorbed at the surface of these two nanocomposites. This study demonstrated that zirconium intercalated synthetic hectorite as well as zirconium modified natural clays are effective and efficient materials for the selective removal of arsenic (V) from aqueous medium.