• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1903-1913
• /
• 2016

본 논문은 광역 셀 기지국이 sub-array 구조의 거대 배열 안테나를 가지고 있는 무선 백홀 하향 링크 시스템에서 두 단계 빔 형성 및 수신 빔 형성 기법을 제안하였다. 또한, 시스템 성능 비교를 위해, 제로 포싱 프리코더(zero-forcing precoder)를 이용한 세 단계 빔 형성 기법을 적용하여 수신 소형 셀 기지국들의 전송률 성능을 계산하였다. 무선 백홀 채널의 채널 산란 및 거리감쇄 특성 등을 고려할 때 공간 다중화를 위한 프리코딩 기술뿐만 아니라 거리감쇄를 극복하기 위한 지향성 빔 형성 기술이 접목되어야 한다. 따라서 첫 번째 단계에서는 DFT(discrete-Fourier transform) 기반의 고정 빔 패턴을 설계하였다. 결과적으로, 피드백 량을 줄이면서 동시에 전송률 성능을 높이기 위해서는 제안한 두 단계 빔 형성 및 수신 빔 형성 기법을 선택하는 것이 공간 다중화를 고려할 때 유리하다는 것을 확인하였다.

• 한국게임학회 논문지
• /
• 제17권3호
• /
• pp.21-32
• /
• 2017

컴퓨터게임은 재미를 위해 지속적으로 유저의 몰입상태를 유지시켜야 한다. 몰입이론에 따르면 몰입상태의 유지는 유저의 게임숙련도와 게임 난이도의 계속적인 균형을 요구한다. 이를 위해 본 연구에서는 제로섬 게임을 가정할 수 있는 캐주얼 액션게임에 적용할 수 있는 9등급 수준의 게임숙련도 평가방법을 제안하였고 부가적으로 유저가 경험한 9등급 수준의 게임난이도 추측방법을 제안하였다. 제안하는 방법은 조건별 수학식에 의한 판정방법이기 때문에 신속하고 쉽게 구현이 가능하다. 커스터마이징한 팩맨게임에 대해 제안하는 방법의 정확성을 실험해본 결과 숙련도의 정확성은 평균적으로 1.2등급의 차이가 나타났고 난이도의 정확성은 평균적으로 1.81등급 차이가 나타났다. 실험결과를 통해 제안하는 방법을 제로섬 조건을 만족하는 캐주얼 액션 게임에 적용할 수 있는 정확성을 갖고 있음을 확인하였다.

• Journal of Communications and Networks
• /
• 제13권3호
• /
• pp.232-239
• /
• 2011

This paper investigates the user selection problem of successive zero-forcing precoded multiuser multiple-input multiple-output (MU-MIMO) downlink systems, in which the base station and mobile receivers are equipped with multiple antennas. Assuming full knowledge of the channel state information at the transmitter, dirty paper coding (DPC) is an optimal precoding strategy, but practical implementation is difficult because of its excessive complexity. As a suboptimal DPC solution, successive zero-forcing DPC (SZF-DPC) was recently proposed; it employs partial interference cancellation at the transmitter with dirty paper encoding. Because of a dimensionality constraint, the base station may select a subset of users to serve in order to maximize the total throughput. The exhaustive search algorithm is optimal; however, its computational complexity is prohibitive. In this paper, we develop two low-complexity user scheduling algorithms to maximize the sum rate capacity of MU-MIMO systems with SZF-DPC. Both algorithms add one user at a time. The first algorithm selects the user with the maximum product of the maximum column norm and maximum eigenvalue. The second algorithm selects the user with the maximum product of the minimum column norm and minimum eigenvalue. Simulation results demonstrate that the second algorithm achieves a performance similar to that of a previously proposed capacity-based selection algorithm at a high signal-to-noise (SNR), and the first algorithm achieves performance very similar to that of a capacity-based algorithm at a low SNR, but both do so with much lower complexity.

• 한국태양에너지학회 논문집
• /
• 제38권4호
• /
• pp.55-66
• /
• 2018

nZEH (net-Zero Energy House) is defined as a self-sufficient energy building where the sum of energy output generated from new & renewable energy system and annual energy consumption is zero. The electricity generated by new & renewable energy system with the form of distributed generation is preferentially supplied to electrical demand, and surplus electricity is transmitted back to grid. Due to the recent expansion of houses with photovoltaic system and the nZEH mandatory by 2025, the rapid increase of distributed generation is expected. Which means, we must prepare for an electricity-power accident and stable electricity supply. Also electricity charges have to be reduce and the grid-connected should be operated efficiently. The introduction of ESS is suggested as a solution, so the analysis of the load matching and grid interaction is required to optimize ESS design. This study analyzed the load matching and grid interaction by expected consumption behavior using actual data measured in one-minute intervals. The experiment was conducted in three nZEH with photovoltaic system, called all-electric houses. LCF (Load Cover Factor), SCF (Supply Cover Factor) and $f_{grid}$ (Grid Interaction Index) were evaluated as an analysis indicator. As a result, LCF, SCF and $f_{grid}$ of A house were 0.25, 0.23 and 0.27 respectively; That of B house were 0.23, 0.23, 0.19, and that of C were 0.20, 0.19, 0.27 respectively.

• 한국IT서비스학회지
• /
• 제9권1호
• /
• pp.91-111
• /
• 2010

An efficient industry structure is essential for competitive IT Service industry in a global world. The purpose of this research is to derive a policy direction paradigm for strengthening IT service industry structure. To find an effective policy direction, an in-depth analysis on deep-rooted problems of IT service industry has been conducted. The root-causes of industry problems are found with new perspectives on IT service industry. Past and present policies on IT service industry have been reviewed based on desirable industry behavior. A new policy paradigm and a roadmap for efficient industry policy are suggested. To justify adequacy of new policy direction, global benchmarking has been performed. USA, Germany, and Japan's IT service industry has been reviewed based on global competitiveness and desirable eco-system. And an in-depth analysis has been performed for two big competitors, India and China, The adequacy of the new policy paradigm has been tested, and mostly approved. IT service industry policy needs to be transformed from manufacturing concepts to service concepts, from domestic focus to global focus, from zero-sum policy to positive-sum policy, from supplier focus to market focus, from internal industry itself to co-growth with main industries. etc. The results of this study can be used for policy adjusting and policy making to strengthen IT service industry's global competitiveness and to improve long-term performance of Korean economy. Further in-depth researches with quantitative analysis will be needed to fully justify the adequacy of the derived new policy directions.

• PNF and Movement
• /
• 제5권1호
• /
• pp.49-56
• /
• 2007

Objectives : We find that the reaction force on the elbow joint during elbow flexion, extension with and without an object in the hand can be calculated the equations of motion that the sum of the torque and the sum of the force acting on the elbow joint must be zero and (moment of inertia x angular acceleration) and (mass x acceleration). Methods : we have calculated the equations of motion (${\Sigma}F=0$, ${\Sigma}{\tau}=0$, ${\Sigma}F=ma$, ${\Sigma}{\tau}=Ia$) to investigate the reaction force on the elbow joint during elbow flexion, extension by means of the simplified free-body technique for coplanar forces. Results : we found that the reaction force on the elbow joint during elbow flexion, extention as constant acceleration motion is more than constant velocity, static motion. Also, we found that the relation between during flexion and during extension like this ; $J_{flexion}$ < $J_{extension}$.

• 한국통신학회논문지
• /
• 제41권8호
• /
• pp.896-902
• /
• 2016

본 논문에서는 다른 셀로부터 발생하는 간섭을 고려하여 다중사용자 다중안테나 하향링크 채널에서 최소평균제곱오차(MMSE: minimum mean-squared error)에 기반한 비선형 연속 프리코딩(precoding) 기법을 제안한다. 기존의 zero forcing(ZF) 기반의 방법과 달리 제안하는 방식은 다른 셀로부터의 간섭을 고려하여 셀 내의 다중사용자 간섭을 억제하는 방식을 취하여 수신단에서의 신호 대 간섭 잡음비를 향상시킬 수 있다. 모의 실험 결과를 통해 제안하는 최소평균제곱오차에 기반한 비선형 전처리 기법이 다양한 셀 간섭 환경에서 기존 방법보다 좋은 성능을 가지는 것을 확인할 수 있다.

• 한국항행학회논문지
• /
• 제13권5호
• /
• pp.736-741
• /
• 2009

본 논문은 분할된 선형배열안테나를 사용하는 다중 사용자 MIMO 기술에서 코드북(codebook)을 운용 환경에 따라 최적화 하는 기술을 제안한다. 제안하는 기술은 공간상관도가 없는 MIMO 채널을 가정하여 디자인된 코드북을 각 순방향 링크의 송신 공간상관행렬을 이용하여 컬러링(coloring)하는 기술이며, 이를 위해 필요한 각 링크의 송신 상관행렬을 제한된 양의 long-term 피드백을 통해 피드백하는 기술을 제안한다. Zero-forcing maximum eigenmode transmission 기술을 사용하는 다중 사용자 MIMO 시스템에서, 제안하는 코드북 최적화 기술의 성능을 분석하였으며, 제안하는 기술이 적은양의 추가 피드백 정보량으로 다양한 운용 환경에 적응적으로 코드북을 최적화함을 보인다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.50-54
• /
• 2016

In this paper, a hybrid method is proposed to design an air-core superconducting solenoid system for 6 T axial uniform magnetic field using Niobium Titanium (NbTi) superconducting wire. In order to minimize the volume of conductor, the hybrid optimization method including a linear programming and a nonlinear programming was adopted. The feasible space of solenoid is divided by several grids and the magnetic field at target point is approximated by the sum of magnetic field generated by an ideal current loop at the center of each grid. Using the linear programming, a global optimal current distribution in the feasible space can be indicated by non-zero current grids. Furthermore the clusters of the non-zero current grids also give the information of probable solenoids in the feasible space, such as the number, the shape, and so on. Applying these probable solenoids as the initial model, the final practical configuration of solenoids with integer layers can be obtained by the nonlinear programming. The design result illustrates the efficiency and the flexibility of the hybrid method. And this method can also be used for the magnet design which is required the high homogeneity within several ppm (parts per million).

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.317-322
• /
• 1989

본 연구에서는 Liu의 매트릭스를 강소성 유한요소법에 도입하여 통상의 소성가공 공정중에 있는 피가공물의 3차원 변형을 실용적인 수준에서 해석 가능케 하는 강소성 유한요소법을 도입하여 통상의 소성가공 공정중에 있는 피가공물의 3차원 변형을 실용적인 수준에서 해석 가능케 하는 강소성 유한요소법을 제안하고 실례를 통하여 제안한수법에 의하여 얻어진 해의 안정성과 계산효율을 검토한다.