• 음성과학
• /
• 제3권
• /
• pp.156-166
• /
• 1998

In this paper, I would like to propose a dividing method by estimating the inflection points and the average magnitude energy in speech signals. The method proposed in this paper gave not only a satisfactory solution for the problems on dividing method by zero-crossing rate, but could estimate the feature of the transient period after dividing the starting point and transient period in speech signals before steady state. In the results of the experiment carried out with monosyllabic speech, it was found that even through speech samples indicated in D.C. level, the staring and ending point of the speech signals were exactly divided by the method. In addition to the results, I could compare with the features, such as the length of transient period, the short term energy, the frequency characteristics, in each speech signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.502-502
• /
• 2000

An input constrained receding horizon predictive control algorithm for uncertain systems with nonzero set points is proposed. For constant nonzero set points, models with uncertainty can be converted into an augmented incremental system through the use of integrators and the problem is transformed into a zero-state regulation problem for the incremental system. But the original constraints on inputs are converted into constraints on the sum of control inputs at each time Instants, which have not been dealt in earlier constrained robust receding horizon control problems. Recursive state bounding technique and worst case minimizing strategy developed in earlier works are applied to the augmented incremental system to yield an of set error free controller. The resulting algorithm is formulated so that it can be solved using LP.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.173-179
• /
• 1999

In reverse engineering, when a shape containing multi-patched surfaces is digitized, the boundaries of these surfaces should be detected. The objective of this paper is to introduce a computationally efficient segmentation technique for extracting edges, ad partitioning the 3D measuring point data based on the location of the boundaries. The procedure begins with the identification of the edge points. An automatic edge-based approach is developed on the basis of local geometry. A parametric quadric surface approximation method is used to estimate the local surface curvature properties. the least-square approximation scheme minimizes the sum of the squares of the actual euclidean distance between the neighborhood data points and the parametric quadric surface. The surface curvatures and the principal directions are computed from the locally approximated surfaces. Edge points are identified as the curvature extremes, and zero-crossing, which are found from the estimated surface curvatures. After edge points are identified, edge-neighborhood chain-coding algorithm is used for forming boundary curves. The original point set is then broke down into subsets, which meet along the boundaries, by scan line algorithm. All point data are applied to each boundary loops to partition the points to different regions. Experimental results are presented to verify the developed method.

• 복식
• /
• 제65권4호
• /
• pp.91-108
• /
• 2015

As a solution to the wasteful consumption of resources in fashion design, this research aims to develop a process guideline for ZWF Design Methods from an educational perspective. After selecting the Jigsaw Puzzle, Subtraction Cutting, and Layer Methods as representative ZWF Methods, an application experiment was designed to deduct each Method's process, characteristics, needs, and improvement points. Its results were analyzed through action protocol analysis, expert evaluation, and qualitative analysis. Based on the analysis, this research proposed a ZWF guideline and a step-by-step guide suitable to the students' needs. By following the guideline, students can use the chosen ZWF Method to create a planned or an accidental design. In addition, they can practice ZWF effectively step by step in the order of Layer, Jigsaw Puzzle, and Subtraction Cutting. Thus, this research can provide the basis for ZWF education, which can lead to expanded application of ZWF in the future and reduce textile waste.

• 아태비즈니스연구
• /
• 제13권3호
• /
• pp.329-341
• /
• 2022

Purpose - The purpose of this study was to investigate consistency in estimating the number of vacant jobs using the two business labor force survey with two different time points of survey. Design/methodology/approach - We studied the cause of the differences in estimating the number of vacant jobs between the monthly sample and the new sample in business labor force survey. Findings - To summarize our findings, As the size of the company increases, the number of vacant jobs in the company also increases, and the probability that the number of vacant jobs in the company is zero decreases. The monthly sample was assessed to have a higher likelihood that the number of vacant jobs in the company was zero and the number of vacant jobs was considerable compared to the local sample. Research implications or Originality - Because local survey sample companies tend to minimize the number of vacant jobs even when they reply under the same conditions, the estimation result of the number of vacant jobs in the current monthly survey differs significantly from the estimation result of the local survey. Divergent "degrees of knowledge of question items," survey methodologies, or investigators could be the causes of the various response trends.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.247-253
• /
• 1998

영과잉-포아송모형에서 변화시점이 있는 경우, 돌출대립가설에 대한 우도비검정을 이용하여 변화시점의 유 무를 알아보았다. 변화시점에 대한 추정은 최소제곱법을 이용하였고 이를 최우추정법을 이용하기 위한 초기치로 활용하였다. 또한 대립가설에 대한 몇가지 흥미있는 모수들을 적률법을 이용하여 추정하였다. 모의실험을 통하여 이들 추정 량을 비교하였고 결과 변화시점에 대한 추정은 최소제곱법보다는 최우추정법이 바람직하게 나타났고 흥미있는 몇가지 모수들에 대해서는 최우추정량이 적률추정량보다 우수하게 나타났다.

• Journal of applied mathematics & informatics
• /
• 제29권5_6호
• /
• pp.1193-1204
• /
• 2011

In the present paper we consider a differential-algebraic prey-predator model with stage structure for prey and harvesting of predator species. Stability and instability of the equilibrium points are discussed and it is observed that the model exhibits a singular induced bifurcation when the economic profit is zero. It indicates that the zero economic profit brings impulse, i.e. rapid expansion of the population and the system collapses. For the purpose of stabilizing the system around the positive equilibrium, a state feedback controller is designed. Finally, numerical simulations are given to show the consistency with theoretical analysis.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.107-114
• /
• 2005

A new approach which combines implicit surface scheme and point projection method is presented in order to fill the arbitrarily shaped holes in the polygon model. In the method a trimmed surface which has an outer boundary curve is generated by using the implicit surface scheme and normal projection of point onto the base surface. The base surface is constructed by creating smooth implicit surface from the incomplete polygon model through which the surface should pass. In this paper an implicit surface is defined by a radial basis function, a continuous scalar-valued function over the domain $R^3$. The base surface is the set of all points at which this scalar function takes on the value zero and is created by placing zero-valued constraints at the vertices of the polygon model. In order to show the validity of the present study, various hole fillings are carried out for the complex polygon model of arbitrary topology.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.3-10
• /
• 2007

A new approach based on implicit surface interpolation combined with domain decomposition is proposed for filling complex-shaped holes in a large polygon model, A surface was constructed by creating a smooth implicit surface from an incomplete polygon model through which the actual surface would pass. The implicit surface was defined by a radial basis function, which is a continuous scalar-value function over the domain $R^{3}$. The generated surface consisted of the set of all points at which this scalar function is zero. It was created by placing zero-valued constraints at the vertices of the polygon model. The well-known domain decomposition method was used to treat the large polygon model. The global domain of interest was divided into smaller domains in which the problem could be solved locally. The LU decomposition method was used to solve the set of small local problems; the local solutions were then combined using weighting coefficients to obtain a global solution. The validity of this new approach was demonstrated by using it to fill various holes in large and complex polygon models with arbitrary topologies.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1577-1583
• /
• 2015

In this research, a combined adaptive-robust current controller is developed for non-minimum-phase DC-DC converters in a wide range of operations. In the proposed nonlinear controller, load resistance, input voltage and zero interval of the inductor current are estimated using developed adaptation rules and knowing the operating mode of the converter for the closed-loop control is not required; hence, a single controller can be employed for a wide load and line changes in discontinuous and continuous conduction operations. Using the TMS320F2810 digital signal processor, the experimental response of the proposed controller is presented in different operating points of the buck/boost converter. During transition between different modes of the converter, the developed controller has a better dynamic response compared with previously reported adaptive nonlinear approach. Moreover, output voltage steady-state error is zero in different conditions.