• 한국컴퓨터정보학회논문지
• /
• 제9권1호
• /
• pp.9-15
• /
• 2004

본 논문에서는 드레인 부근의 채널 영역에서 접합 전계를 줄이는 WSW(Wrap Side Wall) 구조의 소자를 제안하였다. WSW구조의 소자 제작은 첫 번째 게이트를 식각한 후에 NM1(N-type Minor1) 이 온주입을 하고 다시 질화막을 덮어 식각함으로서 만들어진다. 새로운 WSW구조는 전계를 줄이기 위한 버퍼층으로 되어 있으며 WSW소자와 LDD구조의 소자 수명을 비교하였으며 핫-캐리어 열화 특성도 분석하였다. 또한 AC 핫-캐리어 열화를 칩 상에서 평가하기 위해 펄스 발생기, 레벨 시프터, 주파수 분배기를 포함한 테스트 패턴 회로를 설계하였다. 이러한 것은 AC와 DC 스트레스간의 핫-캐리어 열화 조건이 AC와 DC 스트레스 모두 동일한 물리적 메커니즘을 지닌다는 것을 알 수 있었다. 따라서 일반적으로 회로 동작 조건 하에서 DC 핫-캐리어 열화 특성을 토대로 AC 소자 수명도 예측할 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제31권4호
• /
• pp.103-111
• /
• 2011

Laser drilling of vias is the one of key technologies in developing Emitter-Wrap Through(EWT) solar cell which is particularly attractive due to the use of industrial processing and common solar grade p-type silicon materials. While alternative economically feasible drilling process is not available to date, the processing time and laser induced damage should be as small as possible in this process. This paper provides an overview on various factors that should be considered in using the laser via drilling technology for developing highly efficient and industrially applicable EWT solar cells.

• 한국분무공학회지
• /
• 제8권2호
• /
• pp.16-23
• /
• 2003

The Air-jet loom represents a major step in the development of shutterless weaving due to its ability to weave a wide range of yarns at high speeds. The Air-jet weaving involvers, inserting a pre-measured length of yam through the wrap, is sheds by meads of compressed air. The analysis of air flow characteristic of the main nozzle and acceleration tube is required for the loom performance. h this paper We examined the effect of the main nozzle with different acceleration tubes as well as diameters. And also, we compared the performance of straight type tube with laval type tube and of according to be suction hole on the acceleration tube, respectively.

• 지역사회간호학회지
• /
• 제19권3호
• /
• pp.408-418
• /
• 2008

The purpose of the study is to understand the types and the features of the health behavior of middle-aged women in the Middle East using Q-methodology. A survey was carried out during the period from the 1st of October to the 30th of December, 2006. Data for thirty five (35) women out of forty-nine (49) were analyzed through Principal Component Analysis and WRAP (Weighted Rotational Analytical Procedure). Analysis results showed that the group was divided into four types: Type I is health management; Type II is social activity; Type III is exercise orientation; and Type IV is religious dependency. Types I, II, and III were in a positive correlation with one another, and Type IV was not correlated with the other types. Subjective perception on the health behavior of middle-aged women in the Middle East (Jordan) was investigated and compared with middle-aged Korean women. The results of this study may provide more effective ways to improve the condition of health management and to promote the quality of life.

• 한국수소및신에너지학회논문집
• /
• 제30권4호
• /
• pp.338-346
• /
• 2019

During last years, hydrogen refueling infrastructure test and devices research for hydrogen station presented a significant growth consisting of the commercialization of fuel cell electric vehicles (FCEVs). However, we still have many challenges for making commercial hydrogen stations such as increased safety and cost reduction. This study demonstrates the low cost hydrogen storage tank (type 2) and effective winding method for high pressure hydrogen storage. We use numerical analysis to verify stress changes inside the wire according to the winding condition. Also liner size, winding wire size and wire tension were studied for the safety and cost down. Results show that the stress of winding wire decreased with increased winding angle and increased the liner diameter. On the other hand, the stress of winding wire increased according to the increased wire thickness and tension.

• 한국의류학회지
• /
• 제16권4호
• /
• pp.357-369
• /
• 1992

The purpose of this study was to clarify the relationship between the Ideal Beauty of Body and the Form of Dress, and to analyze its historical perspectives. First of all, the concept of the Ideal Beauty of Body, the definition of Dress Form, and the method and system to clarify Dress Form were depicted. Based on this frame work, the Form of Dress related to the Ideal Beauty of Body was described historically. For this purpose, documentary research were conducted and representative photography and paintings were used. The analysis was limited to the female one-Piece dress from Ancient Egypt, Greece, Rome, Byzantine, Gothic, Renaissance, Baroque, Rococo, Naoclassicism, and to Romanticism. The results were as follows: 1. The Ideal Beauty of Body was found to be different throughout history and to be intimate- ly linked with fashionable dress. 2. The Form of Dress consisted of four basic components: The form of body itself, the form of clothing itself, the method of wearing, and the relationship between body and clothing. 3. The standards for classification of body form were body structure, body type, body proportion, posture, and movement. Clothing form was generally classified into flat type (unstructured type) and three dementional type (structured type); flat type was subclassified into draped type and tunic type. The method of wearing was classified into attached type, tying-up type, wrap·around type, pull-over type, open type and plastistic type. The relationship between body and clothing after wearing was generally classified into body priority type and clothing priority type. The clothing priority type was further divided into body exaggeration type and body concealment type; Body exaggeration type was further divided into upward type, downward type, forward type, backward type, right type and constriction type. 4. The pursuit of venus coelestis, metaphysical body part, ectomorphic body type, flat type clothing, body priority type; the pursuit of Venus Naturalis, physical body part, endomorphic body type, three dementional type clothing, clothing priority type proved to be closely related respectively by the historical study on the Ideal Beauty of Body and the Form of Dress.

• 한국임상수의학회지
• /
• 제39권4호
• /
• pp.149-155
• /
• 2022

The aim of this study was to compare the mechanical properties of 0.6 and 0.8 mm cerclage wires with the 1.0 mm cerclage wire in the twist, single-loop, double-loop, double-wrap, and loop/twist knot methods. Six stainless steel cerclage wires of various diameters in different knot methods were tied round a customized jig mounted on a load testing machine. The initial tension, initial stiffness, and yield load were evaluated. The failure mode of each cerclage was observed. For each wire size, the double-loop, double-wrap, and loop/twist knots showed significantly greater initial stiffness, and yield load than those seen with twist and single-loop knots. The single-loop knot showed the least initial stiffness regardless of the diameter. As the cerclage wire diameter increased, the cerclage tended to show significantly greater initial stiffness, and yield load. Failure modes varied depending on the knot configurations. Single-loop knots of smaller-diameter wires less than 1 mm had similar or lower initial tension, initial stiffness, and yield load than a twist knot. Owing to the variance in mechanical properties, the clinical application of the knot type should depend on the diameter of the cerclage wire.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.284-286
• /
• 2002

The inverted retina of the Onchidium dorsal eye (DE) is composed only of ciliary-type photoreceptor cells (CC's). The outer segment (OS) of the CC is a concentric lamellar structure consisting of many modified ciliary membranes and stains positively with anti-$\beta$-tubulin antibody. Near the base of the OS there are about 30 basal bodies each connecting individually to a cilium. The cilia are rod-shaped at the base, progressing upwards to a flattened sheet-like shape with increasing surface area. Three-dimensional analysis on serial sections demonstrates the ladle-shape of a modified cilium. Many modified cilia wrap around each other like the leaves of a cabbage. Nine pairs of microtubules (MT's) are located regularly in a ring at the base of the cilium, gradually losing their regular arrangement towards the periphery, where they separate into two subgroups that are contained within two swollen portions of a modified cilium. Within the CC of the Onchidium DE, MT's in the modified cilium exist as two poles extending longitudinally in a thin expanded ciliary membrane. This arrangement may support the photoreceptive OS and serve to maintain its structural integrity.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1618-1625
• /
• 2006

During the last two decades, several guidelines have been developed and used for assessing the integrity of a defective steam generator (SG) tube that is generally caused by stress corrosion cracking or wall-thinning phenomenon. However, as some of SG tubes are also failed due to fretting and so on, alternative failure estimation schemes are required for relevant defects. In this paper, parametric three-dimensional finite element (FE) analyses are carried out under internal pressure condition to simulate the failure behavior of SG tubes with different defect configurations; elliptical wear, tapered and flat wear type defects. Maximum pressures based on material strengths are obtained from more than a hundred FE results to predict the failure of SG tube. After investigating the effect of key parameters such as defect depth, defect length and wrap angle, simplified failure estimation equations are proposed in relation to the equivalent stress at the deepest point in wear region. Comparison of failure pressures predicted by the proposed estimation scheme with corresponding burst test data showed a good agreement.

• 한국컴퓨터정보학회논문지
• /
• 제22권9호
• /
• pp.115-123
• /
• 2017

The purpose of this study was to investigate the attitude and wearing effect of brassiere wearing in 20's female college students. Particularly, by exploring the necessity of wearing a brassiere, the research was carried out to make it possible to use it effectively in the development of brassiere for women in their early 20s. In early 20s, the type of wearing brassiere in female college students was analyzed as three types: function-importance type, inconvenience-accept type, and wearing inconvenient type. Function-importance type, the brassiere corrects the silhouette of the upper body, has a push-up effect that collects the breast, and it was thought that it would not allow the nipple point to fall. By wearing a brassiere, there is a lift-up effect that reduces the vibration of the breast due to movement and raises the bust. Inconvenience-accept type wears a brassiere so that the breast volume can be improved and the nipple point is not visible. And they strongly agreed that the brassiere would wrap my breasts well and calibrate the upper body silhouette to make my body look pretty. However, they felt that their bust was troubled when they wore it, and they thought that their brassiere would be out of order due to their movements, so they had to wear brassiere for beauty, but they were uncomfortable. The wearing inconvenient type was analyzed as a type that the cup part was lifted, the sweat was not absorbed, and the heat was uncomfortable. It is thought that it is necessary to develop an effective brassiere for the function of raising and collecting breasts based on the body shape of women in their early 20s.