• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.89-96
• /
• 1998

LOM (Laminated Object Manufacturing) process is one of rapid prototyping processes, where shapes are formed by accumulating cross sections of laser-cut paper. The process expects wide popularity since it is simple and the material is familiar to conventional mockup makers. However the dimensional accuracy of LOM parts is not so good as that of traditional wooden mockups, since the stack of adhesive-spread papers causes significant dimensional error. Also it is unclear how the other unknown environmental effects cause the errors as well. In this work the dimensional errors of LOM parts are measured and analysed. Experiments with test parts were performed in order to see the effects of part shape, moist, and sealer on dimensional variations. The characteristic of the paper is also analysed. Re-heating LOM parts, which is shown to have the effect of recovering dimensional changes, is applied to an example part.

• Korean Institute of Interior Design Journal
• /
• no.15
• /
• pp.39-48
• /
• 1998

This study has been peformed to investigate storage space types of old-fashioned traditional dwelling units where older couples maintain their traditional farming lives. In this study it is observed that residents of the traditional farm-houses are exposed to higher level of environmental and emotional pressures. However it is also observed that the older residents are generally manifesting a consistent subculture of the old-timers without noticeable complaints. The usage and morphology of storage spaces are as follows: (1) Storage space in the ceiling are under control of old couple and used for seasonally varied farm products and household equipment. (3) All the households use longterm storage space under wooden floor; the hidden ground is used for keeping miscellaneous tools and fermented foods for years. Overall in this stud it is observed that traditional farm houses are well modified for physically and emotionally frail elderly residents.

• Journal of the Korea Furniture Society
• /
• v.19 no.5
• /
• pp.365-374
• /
• 2008

Understanding of the properties of woods is important in wood utilization. Until now, traditional wooden houses(Korean-style house, Buddhist temple, royal palaces) and furniture have been made of domestic woods with the experience of a craftsman rather than the scientific knowledge on woods. Because of concrete-based houses and imported wood products and furniture, even wood craftsmen decrease in number, too. This study was carried out to collect wood samples growing in Korea and to measure wood characteristics. Anatomical, physical and mechanical properties of 37 wood species were investigated.

• Transactions of Materials Processing
• /
• v.20 no.4
• /
• pp.279-283
• /
• 2011

Recently incremental sheet metal forming (ISF) has used widely in making prototypes and small-volume products in automotive industry etc. We apply the ISF to make a 1/4 sized automobile body-in-white. First, ISF tests for rectangular shaped cup have been performed to clarify the formability denoting the relationship between the component wall angle and maximum cup height of safe forming. Next, a CAD model for the automobile was designed and segmented into several components in order to accommodate the working space of the CNC machine we adopted and the formability of the sheet metal. Then, a CAM software was employed to generate the tool path for manufacturing wooden dies and all the small parts. Finally, the different parts were joined into a single component by laser welding after the ISF process. By using the ISF we successfully produced the 1/4 sized automobile body-in-white.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.158-165
• /
• 2000

Reverse engineering is reproducing products by directly extracting geometric information from physical objects such as clay model wooden mock-up etc. The fundamental work in the reverse engineering is to acquire the geometric data for modeling the objects. This research proposes a novel method for data acquisition aiming at unmanned fast and precise measurement. This is come true by the sensor fusion with CCD camera using structured light beam and touch trigger sensor. The vision system provides global information of the objects data. In this case the number of data and position allocation for touch sensor is critical in terms of the productivity since the number of vision data is very huge. So we applied wavelet transform to reduce the number of data and to allocate the position of the touch probe. The simulated and experimental results show this method is good enough for data reduction.

• 보존과학연구
• /
• s.16
• /
• pp.1-17
• /
• 1995

We conserved efficiently artifacts such as Pole(Treasure No. 930)and Helmet(General of Lee, Wan:1602∼1674) which are housed in the historical department, Kyonggi-do provincial office. It were carrying out physical and chemical methods for removing corrosion products at the same time. During the treatment, the spear was proved to coat gold amalgam on the surface and the pole restored its original state as a result using X-ray fluorescence analysis and Radiography, in addition, we could find their skill and technology by examining the section painted lacquer with wooden by microscopy.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.282-289
• /
• 2014

After being laminated with a combination of glass fiber reinforced plastic and plywood, the GFRP laminated plate was densificated for 1 hour at $150^{\circ}C$ with pressure of $1.96N/mm^2$. A partial reinforced beam was produced by attaching the 5 GFRP laminated plates to the joint of glulam and the column. In addition, the column to beam joint was produced by using reinforced laminated wooden pin which was made of GFRP sheet and plywood, fiber glass reinforced cylindrical-LVL column. The joint was made of round log, glulam and drift pin as the reference specimen, and its moment resistance was evaluated. As a result, the strength performance of specimens with partial reinforced beams were 1.8 times stronger than the reference specimen on average. Furthermore, rupture was neither occurred on partial reinforced beam nor column. Toughness and stiffness of joints were also fine. The GFRP sheet reinforced laminated plate showed better reinforcement effect than GFRP textile reinforced one. GFRP sheet was inserted into each layer of laminate, and it showed good condition in rotation-angle and strength, therefore it is the most appropriate to reinforce the part of the beam.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.231-241
• /
• 2009

Trade specialization index, import market share, unit value index, market comparative advantage index have been applied to compare the competitiveness of forest products in Korean and European markets for the case of Korea-EU FTA. The results say that no items of non-timber products would show a surge of imports as a result of FTA. Timber products, however, such as non-coniferous plywood, continuously shaped wood (non-coniferous), densified wood, wood wool and flour, other (plywood), other (particle board, 441039)), other (fiberboard), oriented strand board (other), other (particle board, 441090), other (particle board, 441031), Prefabricated buildings of wood, fibreboard (of a density exceeding $0.5g/cm^3$ but not exceeding $0.8g/cm^3$), wooden frames (for paintings, photographs, mirrors or similar objects) and wood marquetry and inlaid wood are expected to increase of their imports by eliminating tariffs. For Korean exports no items of non-timber products have competitiveness in European market. For Korean pyroligneous liquid, which is the only competitive timber product in EU market in terms of MCA and TSI, it is difficult to decide whether it has competitiveness, since the actual exports have taken place occasionally during a period of last five years.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.5
• /
• pp.423-437
• /
• 2024

Wood biomass, such as sawdust, particles, and chips from the wood industry, can be potentially used as a composite product. Chip block pallets (CBP) are composite products that can be produced from industrial wood waste and are in high demand in the logistics sector. Therefore, this study aimed to investigate the production of CBP from teak wood biomass with varying polyurethane contents. In addition, this study analyzed the optimum particle-size composition was determined. The CBP production of CBP be divided into two stages. The first stage evaluated the use of polyurethane adhesive content, whereas the second stage considered the effect of particle size composition. The 9 × 9 × 9 cm³ of CBP with 0.6 g/cm³ target density was fabricated using a cold press. The National Wooden Pallet and Container Association (NWPCA) standards were used to evaluate the density, moisture content, dimensional stability, water absorption, compressive strength (CS), and screw-holding strength (SHS) of our CBP products. The mechanical and physical properties of CBP products were investigated. As a result, the CBP sample prepared using 4-14 mesh particle size and 4.5% adhesive content showed the optimal strength values, such as CS of 14.67 MPa and SHS of 371.50 N. These findings demonstrate that the CBPs derived from teak wood waste closely resemble commercial chip blocks and have the potential to replace wood bearings as pallet pads.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.449-456
• /
• 2016

This study was aimed to quantify the amount of carbon dioxide emissions and to suggest suitable plans which consider the carbon emission reduction in the manufacturing process of the domestic structural glued laminated timber. Field investigation on two glued laminated timber manufacturers was conducted to find out material flow input values such as raw materials, transportation, manufacturing process, and energy consumption during manufacturing process. Based on the collected data and the relevant literatures about life cycle inventory (LCI), the amount of carbon dioxide emission per unit volume was quantified. Results show that the carbon dioxide emissions for sawing, drying and laminating process are 31.0, 109.0, 94.2 kg $CO_2eq./m^3$, respectively. These results show 13% lesser amount of total carbon dioxide emissions compared with the imported glued laminated timber in Korea. Furthermore, it was decreased about 37% when the fossil fuel would be replaced with biomass fuel in drying process. Findings from this study is effectively used as the basic data on the life cycle assessment of wooden building.