• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1B
• /
• pp.48-57
• /
• 2008

Wireless sensor networks are composed of a lot of sensor nodes and they are used to monitor environments. Since many studies on wireless sensor networks have considered a stationary sink node, they cannot provide fully ubiquitous applications based on a mobile sink node. In those applications, routing paths for a mobile sink node should be updated while a sink node moves in order to deliver sensor data without data loss. In this paper, we propose a method to continuously update routing paths for a mobile sink node which can be extended on hierarchical multi-hop routing protocols in wireless sensor networks. The efficiency of the proposed scheme has been validated through comparing existing method using a location based routing protocol by extensive computer simulation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.2
• /
• pp.13-20
• /
• 2005

An ad hoc wireless networks forms temporary network without the aid of fixed networks or centralized administration with a collection of wireless mobile hosts. In this case, it is necessary for one mobile host to enlist the aid of other hosts in forwarding a packet to its destination. This paper presents an efficient cluster-based routing protocol scheme for ad hoc networks. The cluster is used for path setup and data delivery. Our cluster-based routing algorithm is designed for the improvement of the load balance. Our simulation results show the improved performance for low mobility networks comparing with the previous works.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.275-281
• /
• 2012

Community network is a communication environment where heterogeneous devices can access and communicate with each other at any time and at any space to share information. To do so, mobile devices are required to be self-configured even in absence of communication infrastructures. Semi-infrastructured wireless ad-hoc network is a promising solution to meet with such a requirement. This paper proposes the VTC(virtual topology coordinator) system as an evaluation tool for examining network protocols that are intended to be deployed in the semi-infrastructured ad-hoc networks. VTC emulates multi-hops wireless network topology virtually using a mechanism of selective receiving MAC frame in a small area, where only a single hop communication is available. VTC system cannot consider all properties introduced in real wireless network, but do more wireless properties than verification through simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.30-45
• /
• 2014

Recently, multimedia application users who demand for ubiquitous computing environment are rapidly increasing, and wireless mesh network is receiving attention as a cost-effective key technology for next generation wireless networking. When multiple flows are transmitting data at the same time in the network, routing for path selection of each flow and link resource allocation for data transmission of each flow are one of the key factors that influence to the effectiveness of the network directly. In this paper, we consider problems for path discovery and resource allocation of links at the same time and we propose an algorithm based on mathematical modeling using a technique for cross-layer optimization design in STDMA-based wireless mesh networks that can enhance transfer performance for each flow. We show by performance analysis that the proposed algorithm can enhance the throughput performance by maximally utilizing given bandwidth resources when the number of flows increase in multi-hop wireless mesh networks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.322-331
• /
• 2013

Wireless Mesh Networks(WMNs) is generally composed of radio nodes in the mesh topology. WMNs consists of mesh client, mesh router and gateway connected to a wired network. Each client and router relay messages to the gateway for communication. WMNs is widely used recently in many areas can provide extended coverage based on multi-hop communication and ubiquitous communication at any time and any location. However the competition and collision between each node to transmit data is inevitable when the same channel is used for transmission. The transmission opportunities and the throughput of nodes located far from gateway decrease more if the communication channel is accessed based on competitive CSMA/CA scheme using DCF(Distributed Coordination Function) provided by IEEE 802.11 MAC. In this paper, we improve the performance of the TCP fairness and throughput of the nodes with more than 2 hops by applying various algorithms for controlling contention window values. Also, we evaluate the performance using ns-2 simulator, According to the results, proposed scheme can enhance the fairness characteristic of each node irrespective of data to the gateway.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2815-2822
• /
• 2011

Clustering method in wireless sensor networks is the technique that forms the cluster to aggregate the data and transmit them at the same time that they can use the energy efficiently. In this paper, I propose the hierarchical unequal clustering method using cluster group model. This divides the entire network into two layers. The data aggregated from layer 2 consisted of cluster group is sent to layer 1, after re-aggregation the total data is sent to base station. This method decreases whole energy consumption by using cluster group model with multi-hop communication architecture. Hot spot problem can be solved by establishing unequal cluster. I also show that proposed hierarchical unequal clustering method is better than previous clustering method at the point of network energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1289-1297
• /
• 2014

In this paper, we use the ECMA-392 standard, the first cognitive radio networks to meet the demand for IT services in the ship. We propose a ECMA-392 cooperative MAC protocol to ensure QoS to support multimedia services in the ship area in a multi-hop wireless bridge using ECMA-392 networks. Because the proposed protocol transmits directly or relay transmission by selecting efficient routes based on the information of the ECMA-392 devices, it provides communication to ensure QoS of the device. The simulation results show that the proposed cooperative MAC protocol improves a throughput of devices compared to the existing method.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.131-137
• /
• 2007

Recently, Ant Colony Optimization (ACO) is emerged as a simple yet powerful optimization algorithm for routing and load-balancing of both wired and wireless networks. However, there are few researches trying to adopt ACO to enhance routing performance in WSN owing to difficulties in applying ACO to WSN because of stagnation effect. In this paper, we propose an energy-efficient path selection algorithm based on ACO for WSN. The algorithm is not by simply applying ACO to routing algorithm but by introducing a mechanism to alleviate the influence of stagnation. By the simulation result, the proposed algorithm shows better performance in data propagation delay and energy efficiency over Directed Diffusion which is one of the outstanding schemes in multi-hop flat routing protocols for WSN. Moreover, we checked that the proposed algorithm is able to mitigate stagnation effect than simple ACO adoption to WSN.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.611-625
• /
• 2018

With innovative advances in wireless communication technology, many researches for extending network lifetime in maximum by using energy harvesting have been actively performed on the area of network resource optimization, QoS-guaranteed transmission, energy-intelligent routing and etc. As known well, it is very hard to guarantee end-to-end network delay due to uncertainty of the amount of harvested energy in multi-hop RF(radio frequency) energy harvesting wireless networks. To minimize end-to-end delay in multi-hop RF energy harvesting networks, this paper proposes an energy efficient routing metric based on interference aware and protocol which takes account of various delays caused by co-channel interference, energy harvesting time and queuing in a relay node. The proposed method maximizes end-to-end throughput by performing avoidance of packet congestion causing load unbalance, reduction of waiting time due to exhaustion of energy and restraint of delay time from co-channel interference. Finally simulation results using ns-3 simulator show that the proposed method outperforms existing methods in respect of throughput, end-to-end delay and energy consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.4781-4803
• /
• 2017

Environmental monitoring systems using Wireless Sensor Networks (WSNs) face the challenge of high power consumption, due to the high levels of multi-hop data communication involved. In order to overcome the issue of fast energy depletion, a proof-of-concept implementation proves that adopting a clustering algorithm in environmental monitoring applications will significantly reduce the total power consumption for environment sensor nodes. In this paper, an energy-efficient WSN-based environmental monitoring system is proposed and implemented, using eight sensor nodes deployed over an area of $1km^2$, which took place in the city of Tabuk in Saudi Arabia. The effectiveness of the proposed environmental monitoring system has been demonstrated through adopting a number of real experimental studies.