• ETRI Journal
• /
• v.38 no.5
• /
• pp.941-951
• /
• 2016

In this paper, cognitive radio and simultaneous wireless information and power transfer (SWIPT) are effectively combined to design a spectrum-efficient and energy-efficient transmission paradigm. Specifically, a novel SWIPT-based primary-secondary cooperation model is proposed to increase the transmission rate of energy/spectrum constrained users. In the proposed model, a multi-antenna secondary user conducts simultaneous energy harvesting and information forwarding by means of power splitting (PS), and tries to maximize its own transmission rate under the premise of successfully assisting the data delivery of the primary user. After the problem formulation, joint power splitting and beamforming optimization algorithms for decode-and-forward and amplify-and-forward modes are presented, in which we obtain the optimal PS factor and beamforming vectors using a golden search method and dual methods. Simulation results show that the proposed SWIPTbased primary-secondary cooperation schemes can obtain a much higher level of performance than that of non-SWIPT cooperation and non-cooperation schemes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1573-1579
• /
• 2010

In this paper, we studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for users and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. And more bandwidth makes received antenna sensitivity bad. So it needs more wireless stations. We deduced best bandwidth for subway wireless transmission system using the cost of installation and efficiency of system. Consequently, we proposed efficient service model for broadband wireless system at a subway. Subway broadband wireless transmission system is testing and extended to province subway. The cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed using proposed service model. Therefore, the effectiveness of it will be expected to be very big.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.353-362
• /
• 2008

Operation data and fault data are recorded at the TCMS(Train Control and Monitoring System) of train are very important record for repairs and inspection of train. there are two ways to transfer the data today. one is using memory card and the other is using wireless communications. This paper is proposed about TCMS wireless depot analytical equipment that transfers data recorded in train to depot equipment via wireless method. The TCMS wireless depot equipment configuration is an AP(Access Point) and a central server PC at depot equipment. This method has the advantage of decrease of personnel expenses, collection time and convenience of staffs. This paper is verified about the utility of use, efficient establishment position of an AP at depot, the safety of data receiving, the exactitude of data and the shortening of transmission time. and this equipment is now operating at shin-jeong depot of SeoulMetro.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.253-256
• /
• 2001

This paper describes a high speed MAC(Media Access Control) function chip for IEEE 802.11 MAC layer protocol. The MAC chip has control registers and interrupt scheme for interface with CPU and deals with transmission/reception of data as a unit of frame. The developed MAC chip is composed of protocol control block, transmission block, and reception block which supports the BCF function in IEEE 802.11 specification. The test suite which is adopted in order to verify operation of the MAC chip includes various functions, such as RTS-CTS frame exchange procedure, correct IFS(Inter Frame Space)timing, access procedure, random backoff procedure, retransmission procedure, fragmented frame transmission/reception procedure, duplicate reception frame detection, NAV(Network Allocation Vector), reception error processing, broadcast frame transmission/reception procedure, beacon frame transmission/reception procedure, and transmission/reception FIEO operation. By using this technique, it is possible to reduce the load of CPU and firmware size in high speed wireless LAN system.

• Journal of Korea Multimedia Society
• /
• v.16 no.4
• /
• pp.464-471
• /
• 2013

With the advance of wireless sensor networks, WMSN(Wireless Multimedia Sensor Networks) researches to transfers multimedia data have been studied actively. First of all, three basic protocols, End-to-end, Hop-by-hop, and Unreliable transmission method, are compared to transfer multimedia data using simulations. This paper presents an efficient protocol to transfer multimedia data by overhearing messages of nodes and by transmitting next packets during the unused time interval. The proposed method is verified its performance by simulations and experiments. The results shows that the transmission rate of the proposed method 22% higher than that of End-to-end protocol with half of transmission time. Also the performance of the proposed method is compared with that of PIGAB(Packet Interval Gap based on Adaptive Backoff).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.149-156
• /
• 2012

This paper suggests the data transmission technology for applying to the actual railway line based on the technological trends and theories for the wireless Mesh techniques. This paper presents a technical basis that is applicable to the economic and efficient use of frequency and to the development of a Communication Based Train Control System by demonstrating its Applicability, Availability, Reliability and Safety for the train control system of the radio frequency of the bandwidth of 5.7 GHz at the experiments.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.676-678
• /
• 2003

Recently, in according as rapid improvement of telecommunication markets and wireless internet technology, Location- Based Services (LBS) have been discussed as new 'Killer' application. The purpose of LBS is to determine location of user through mobile handset and to offer location information service to end-user. This paper has suggested an efficient transmission scheme of maps data as one of the important content services relating to data transmission of LBS in mobile environment. The basic system consists of three parts : (1) GIS (Geographic Information System) Server for storing, processing and handling map data, (2) Middleware Server for transmitting of map data by request of client, and (3) Client for requesting map data to Server and displaying them on handset. Also, in order to transmit map data, we are to expand WKB (Well Known Binary) in conformance to Simple Feature Specification of OGC (Open GIS Consortium), and increase efficiency of data transmission by developing trans mission data format to be able to transmit lightweight data and considering data compression technology.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.636-641
• /
• 2018

In recent years, the Internet of things has grown rapidly and is being used in many fields. The function of an Internet device isto collect information in various environments and to provide useful information to users. Due to recent developments in technology, the kinds of Internet devices are increasing and the prices are getting cheaper. In addition, many open source platforms that are easy to use have been developed and are providing convenience to users. In this paper, wireless data transmission and cloud server system based on ESP-12E NodeMCU module was designed and sensor information collected from Internet devices was transmitted to cloud server through WiFi wireless communication. The collected sensor data was saved by creating channel and field in the cloud server and the data of each field was visualized as a graph.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1829-1836
• /
• 2009

A wireless Ad-hoc network is willing to send and receive data and for other nodes, and it is a temporal network where the nodes with mobility are automatically constituted. This network has been studied to construct networks in the state where there is no infrastructure. The limited nodes and its frequent moving in a wireless Ad-hoc network have resulted in frequent network disconnection. Therefore, the data transmission rate should be secured in a wireless Ad-hoc network. This study proposes the method to improve QoS of data transmission considering the mobility of nodes that respond to path searching by means of AOMDV routing protocol. By applying the suggested method, it is possible to raise the transmission rate by improving the reliability of transmission path.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.739-749
• /
• 2015

Field measurement of wind characteristics is of great significance for the wind engineering community. High-frequency anemometers such as ultrasonic anemometers are widely used to obtain the high-frequency fluctuating wind speed time history. However, conventional instrumentation systems may suffer from low efficiency, non-real time transmission and higher maintenance cost, and thus are not very appropriate in the field measurement of strong winds in remote areas such as mountain valleys. In order to improve the field measurement performance in those remote areas, a wireless high-frequency anemometer instrumentation system for field measurement has been developed. In this paper, the architecture of the proposed instrumentation system, and measured data transmission and treatment will be presented firstly. Then a comparison among existing instrumentation systems and the proposed one is made. It shows that the newly-developed system has considerable advantages. Furthermore, the application of this system to the bridge site located in the mountain valley is discussed. Finally, typical samples of measured data from this area are presented. It can be expected that the proposed system has a great application potential in the wind field measurement for remote areas such as the mountainous or island or coastal area, and hazardous structures such as ultra-voltage transmission tower, due to its real-time transmission, low cost and no manual collection of data and convenience.