• Archives of Craniofacial Surgery
• /
• v.16 no.1
• /
• pp.17-23
• /
• 2015

Background: Treatment of skull base tumors is challenging due to limited access and presence of important neurovascular structures nearby. The success of a complete tumor resection depends on the extent of tumor exposure and secure field of view. While these tumors are often removed by transcranial endoscopic access, transfacial approach is sometimes required depending on the location and size of the tumor. This study describes various transfacial approaches in patients undergoing skull base tumor resection. Methods: From March to November 2013, 15 patients underwent skull base tumor resection via transfacial accesses at a tertiary institution. Data were reviewed for patient demographics, type of access used, completeness of tumor resection, surgical outcome, and postoperative complications. Results: Two clivus tumor patients underwent transmaxillary approach; three tuberculum-sellae and suprasellar-hypothalamus tumor patients underwent transbasal approach; three clinoid and retrobulbar intraconal orbital tumor patients underwent orbitozygomatic approach; and seven petroclival-area, pons, cavernous sinus, and lateral-sphenoid-wing tumor patients underwent zygomatic approach. In all cases, the upper and lower margins of the tumor were visible. Complete tumor removal consisted of 10 cases, and partial tumor removal in 5. There were no immediate major complications observed for the transfacial portion of the operations. The overall cosmetic results were satisfactory. Conclusion: Plastic surgeons can use various transfacial approaches according to the location and size of skull base tumors to secure a sufficient field of view for neurosurgeons.

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.145-156
• /
• 2019

As the industrial desire for a step change in productivity within the manufacture of composite structures increases, so does the interest in Through-Thickness Reinforcement technologies. As manufacturers look to increase the production rate, whilst reducing cost, Through-Thickness Reinforcement technologies represent valid methods to reinforce structural joints, as well as providing a potential alternative to mechanical fastening and bolting. The use of tufting promises to resolve the typically low delamination resistance, which is necessary when it comes to creating intersections within complex composite structures. Emerging methods include the use of 3D woven connectors, and orthogonally intersecting fibre packs, with the components secured by the selective insertion of microfasteners in the form of tufts. Intersections of this type are prevalent in aeronautical applications, as a typical connection to be found in aircraft wing structures, and their intersections with the composite skin and other structural elements. The common practice is to create back-to-back composite "L's", or to utilise a machined metallic connector, mechanically fastened to the remainder of the structure. 3D woven connectors and selective Through-Thickness Reinforcement promise to increase the ultimate load that the structure can bear, whilst reducing manufacturing complexity, increasing the load carrying capability and facilitating the automated production of parts of the composite structure. This paper provides an overview of the currently available methods for creating intersections within composite structures and compares them to alternatives involving the use of 3D woven connectors, and the application of selective Through-Thickness Reinforcement for enhanced damage tolerance. The use of tufts is investigated, and their effect on the load carrying ability of the structure is examined. The results of mechanical tests are presented for each of the methods described, and their failure characteristics examined.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.20-20
• /
• 2003

We developed 30 ㎽-AlInGaN based violet laser diodes. The fabrication procedures of the laser diodes are described as follows. Firstly, GaN layers having very low defect density were grown on sapphire substrates by lateral epitaxial overgrowth method. The typical dislocation density was about 1-3$\times$10$^{6}$ /$\textrm{cm}^2$ at the wing region. Secondly, AlInGaN laser structures were grown on LEO-GaN/sapphire substrates by MOCVD. UV activation method, instead of conventional annealing, was conducted to achieve good p-type conduction. Thirdly, ridge stripe laser structures were fabricated. The cavity mirrors were formed by cleaving method. Three pairs of SiO$_2$ and TiO$_2$ layers were deposited on the rear facet for mirror coating. Lastly, laser diode chips were mounted on AlN submount wafers by epi-down bonding method. The lifetime of the laser diodes was over 10,000 hrs at room temperature under automatic power controlled condition. We expect the performance of the LDs to be improved by the optimization of the growth and fabrication process. The detailed characteristics and important issues of the laser diodes will be discussed at the conference.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.401-409
• /
• 2007

The objective of this research is to provide better knowledge on the behavior of strong axis SRC column-RC beam joint, supported by experimental results, that can be broadly applicable to many structures. For this purpose, firstly literature reviews and field survey were made to classify the most commonly used for these types of joints. Then, experimental program was designed and performed including 6 SRC column-RC beam joint specimens designed with various joint details. Using the experimental results obtained from the quasi-static cyclic tests, structural performances of the joints such as hysteretic curves, maximum strength capacities, strength degradation beyond the maximum strength, ductilities, and energy dissipation capacities were investigated. Test results showed that specimens with wide beam shape (RCW-P, RCW-W, RCW-F) and T beam shape (RCT-W) showed better structural performances than the bracket type specimens (HBR-L, HBR-S). These specimens also revealed to have higher strength capacities than the nominal design strength. However, H beam bracket type specimens (HBR-L, HBR-S) need further study both analytically and experimentally to verify the reason for unexpected structural performances.

• Korean Journal of Agricultural Science
• /
• v.29 no.1
• /
• pp.32-43
• /
• 2002

The peach pyralid moth (Dichocrocis punctiferalis) is reported as import ant pest insect to chestnut fruits in Asia including Korea. For seasonal occurrence of D. punctiferalis in 1996, 1998 and 1999, D. punctiferalis adults were collected by light trap and sex pheromone wing trap in the chestnut orchard. Also, damaged rate of chestnut fruits were examined each collecting site. In 1996, according to examination by using light trap at three different site in Kongju, the occurrence peak of 2nd gene ration of D. punctiferalis adults was early August. Collected individuals after September were cons ide red as 3rd generation. Damaged rate due to maturation type was 26.5% averagely. The order of damaged rate were early, late and middle maturation type as 35.04%, 19.35% and 26.03%, respectively. Using synthetic sex pheromone trap at Kongju, Cheungyang and Buyeo in 1998, occurrence peaks were occurred mid-August to 2nd generation and late September to 3nd gene ration in Kongju. However, from early-August to late-September 5 peaks were occurred sequentially in Cheungyang. Second generation adults were occurred in mid-August and 3rd ones were occurred from late-September to early-October in Buyeo. In 1999, occurrence peaks of 3rd generation were early, middle and late September in Kongju, Cheungyang and Buyeo respectively. Damaged rate were 6.8%, 6.6% and 15.3% in Kongju, Cheungyang and Buyeo, respectively. Damaged rate order due to variety were Eunki, Chukpa, Danpa, Bokpa, Wangjung, Byunggo57, Yuoma at Buyeo and were Chukpa, Dukmyung, Byunggo57 at Cheungyang in 1999. Damage rate of chestnut were different with variety. Eunki and Chukpa in Buyeo and Chukpa and Dukmyung in Cheungyang were more damaged by D. punctiferalis respectively.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.378-390
• /
• 1997

Ten total populations of Korean fir (Abies koreana Wilson) and Manshurian fir [A. nephrolepis (Traut.) Maxim.] were sampled from south Korea to investigate patterns of intraspecific variation in these species and to evaluate a recognition of the two species. Principal components analysis and cluster analysis were performed both on seed-cone data and on needle morphology data. The characters that contributed most to the separation between A. koreana and A. nephrolepis along three principal components axis were leaf width, length of seed, width of seed wing, length of seed wing, cone width, width of scale, and length of bract tip, but these characters were not diagnostic because of overlap in reality. Therefore, all these characters were not reliable in distinguishing these two taxa including bract position (exerted and recurved vs. exerted and straight). The individuals of A. koreana from Mt. Chi-ri appeared quite unique probably on account of its larger cone size and longer scale tip, while those from Mt. Hal-la of A. koreana were generally distinct from others in terms of their larger seed and seed wing and longer scale width. The Mt. Duk-yu specimens of A. korecana appeared somewhat smaller but more data were needed due to the small sampling size. Generally, the gradual clinal geographic trends made evident by the position of resin ducts in leaves of A. koreana can be detected. The southern populations, Mt. Hal-la (an insular population) were generally distinct from the northern populations (Mt. Chi-ri, Mt. Ga-ya and Mt. Duk-yu) in terms of their position of resin duct (medial, within mesophyll vs marginal, close to epidermis : 100% vs 75 or 50%). Although no sharp boundary separating these two species could be detected based on cone and needle morphology, the observed clinal pattern was distinct in northern populations of A. koreana and southern population of A. nephrnlepis. In a preceding study of the flavonoids variation of 20 species in eastern Asia, flavanone (5-deoxyflavanone) was found to be characteristic of A. faxoniana Rehder et Wilson, A. georgei Orr of China and A. koreana of Korea. A. faxoniana, which is assumed to be primitive species, has position of resin duct relative to both the medial and the marginal, while A. georgei and A. koreana are identified by marginal position of resin duct. With respect of foliar flavonoids chemistry, A. koreana was distinct from A. nephrolepis : the southmost samples (Mt. Hal-la and Mt. Chi-ri) contained additional flavonoids derivatives (mainly flavanone) that were not found in the northmost samples of A. nephrolepis except a few individuals from Mts. Seo-rak and Tae-bak populations of Kwang-won province. The presence of A. koreana type flavonoids in two Chinese species suggested that position of resin duct may be a phyletic character. Abies koreana including two Chinese taxa, exhibited the most elaborate and specialized flavonoids profile within the Abies in eastern Asia. Contrary to our initial expectations, the apparent intermediates between A. nephrolepis and A. koreana in Duk-yu and Ga-ya mountains were found. The pattern of variation on position of resin duct and flavonoids chemistry in these populations of A. kareana suggested that genetic interchange or natural hybridization had occurred between these two species. The evidence needed to resolve the status of this taxon is still inconclusive in our opinion until intermediate individuals from Mts. Duk-yu and Ga-ya show indication of hybridization between the two species.

• Korean Journal of Poultry Science
• /
• v.40 no.4
• /
• pp.291-297
• /
• 2013

This study was conducted to evaluate the productivity of Korean native chicken (KNC) 2 strains crossbred. The number of chicks analyzed in this study was 300. Crossbreds used in this studywere A) KNC R strains ${\times}$ KNC meat type S strains, B) KNC egg-meat D strains ${\times}$ KNC meat type H strains, C) KNC egg-meat D strains ${\times}$ KNC meat type S strains, D) KNC egg-meat C strains ${\times}$ KNC native Y strains, and E) KNC native Y strains ${\times}$ KNC meat type H strains. The crossbreds C had the highest performance on body weight gains at 7~10 weeks but crossbreds D showed the lowest (p<0.05). The feed conversion ratio of crossbreds D was the highest value at every weeks (p<0.05). But the carcass weight and carcass ratio of crossbreds D was the lowest value at every weeks (p<0.05). For the percentage of cutted meat, the ranges of mean were 30.60~33.75% in breast, 21.48~24.72% in leg, 11.95~14.33% in wing, 21.91~25.83% in back and of 7.38~8.72% in neck. The percentage of cutted meat for leg was the highest value at every weeks (p<0.05). These results suggested that the development of new crossbreds should be necessary for better performance.

• Journal of Korean Society of Forest Science
• /
• v.76 no.2
• /
• pp.109-118
• /
• 1987

The purpose of this study was to investigate the inhabiting ecology of wild birds using artificial nests in Gyeongnam province. The sort of birds, the utilization of artificial nests by the materials, by the sites and by the forest type, and other inhabiting ecology of birds were investigated from 1984 to 1986. The results obtained were as follows; 1. Wild birds in surveyed areas were classified into 20 families and 35 species. Among them the birds inhabiting the artificial nests were 6 species and those using them most frequently were Parus ater (17.2%), P. major (16.7%) and P. palustris (12.2%). 2. The artificial nests installed on the top and at the toot of the mountain were chiefly utilized by P. ater and P. major, but the artificial nests in park area were mostly used by Passer montanus and Sturnus cineraceus. 3. Sixty-one percent of the artificial nests were utilized by the birds; 45.5% were used for breeding and 15.6% were inhabitation only. 4. When different nest materials and shapes were tested, mixed nests (sawdust and cement) were used most frequently, and C type. (Diamond shape) of wood nests was used more frequently compared with the A (Roof shape) and B (Box shape) types of wood nests. Meanwhile, the birds prefered the 3cm hole size (81.1% of utilization) to 4cm of hole (57.8%) and 5cm of hole (24.4%). 5. The artificial nests constructed in mixed forest were more frequently inhabited (73.3%) by the birds than coniferous forest (68.3%) and broad-leaved forest (63.3%). 6. The period of egg-laying in Parus species was from late April to early May, while Eophona migratoria, Lanius bucephalus, Motacilla alba and Passer montanus laid eggs generally in the middle of May. 7. Parus species, Passer montanus and Motacilla alba laid one egg every day for 5-10days, but Eopphona migratoria laied 4 eggs in 7 days and Lanius bucephalus laid 5 eggs in 4 days. The incubation period of Parus species was 16-18 days, while the others were about 11 to 14 days. 8. Thirteen days after the hatch of Parus major, chicks reached 13.9g of body weight, 72.0mm of wing-length and 20.9mm of tarsus length. P. montanus chicks reached 20.3g of weight, 66.2mm of wing-length and 20.2mm of tarsus length during the same period. 9. Food item of feeding chicks almost consisted of creatures (98.2%) with following composition; 55.2% of insect larvae, 37.2% adult insects, 2.8% of pupae and 2.8% of spiders. Vegetable items were 2% only. Among those creature food items, 95.2% were insect pests to forest.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.4
• /
• pp.121-127
• /
• 1972

The present paper deals with the results of the comparative morphology on the urohyal bones on the right-eye flounders, pleuronectidae fishes in Korean waters. The results obtained are as follows : 1. The position of the tip of sciatic part is quite different depending on the genera and species of the fishes. The sciatic part of the genera, Platichthys and Cleisthenes, is very short extending to the middle portion of the main part. In the fishes of Eopsetta and Tanakius, it is also very short extending to the anterior 1/3 of the distance from the tip of main part. The fishes of Verasper and Dexistes have a short sciatic part which extends toward the posterior 1/4 of the distance from the tip of main part. The fishes Of Limanda, Clidoderma, Glyptecephalus and Microstomus have a long sciatic part which extends as long as the main part. However, those of Kareius and Pleuronichthys have a very long sciatic part extending twice long as the main part. The tip of sciatic part of the fishes belonging to Eopsetta, Verasper, Limanda, Platichthys, Tanakius and Glyptocephalus is a truncate form. It is pointed upward in the fishes of Kareius, Pleuronichthys, Clidoderma and Microstomus, but pointed forward in Cleisthenes and Dexistes. 2. The size and form of the cardiac apophysis vary with the developmental grades of the urohyal bone. The fishes of Eopsetta, Verasper, Platichthys, Tanakius, Kareius and Dexistes possess relatively large apophyses and those of Pleuronichthys and Clidoderma have small apophyses. Intermediate size of the apophysis is found in the fishes of Limanda, Microstomus and Cleisthenes. A long and barlike apophysis is found in Glyptocephalus. Three kinds of the cardiac. apophysis are found in the fishes examined, i. e., lateral wing in Eopsette, Verasper, Limanda, Platichthys, Tanakius, Glyptocephalus, Kareius, Pleuronichthys and Clidoderma, pointed forward in Microstomus and Cleisthenes, and truncate with a well-developed inner ridge type in Dexistes. 3. The angle of the main part and sciatic part varies from 30 to 60 degrees in the fishes studied except for the fishes of Pleuronichthys, Clidoderma and Microstomus which show a semi-elliptical form.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.4
• /
• pp.41-48
• /
• 2014

Objectives The present study examines the domestic trend of Failed Back Surgery Syndrome (FBSS) in Korea. Methods The studies on FBSS were investigated via searching Korean web databases. As a result, 41 research papers were found and they were analyzed according to the year of publishment, the titles of journals which have the papers, the types of study, the definition of FBSS, employed treatment trials, and the instruments for assessment. Results The number of the research papers on FBSS published was increased since 2005. The studies on FBSS were mainly published in the Korean Journal of Pain. The most popular type of the studies were the case report and the most studies defined FBSS as persistent or recurring low back pain with or without sciatica after receiving spine surgeries. Various surgical and conservative treatments were employed in the studies and Visual Analogue Scale (VAS), Numeric Rating Scale (NRS), Oswestry Disability Index (ODI) were used as primary means of assessments. Conclusions Reviewing the domestic trends of studies on FBSS and examining the definition of FBSS is essential for the future studies because there is no clear criteria for making diagnosis of FBSS. Therefore, the further studies on FBSS need to be more elaborate with the definition of FBSS, and it is also necessary to apply more assessment tools for the better understanding of FBSS from various aspects. Ultimately, this review is anticipated to benefit the future in-depth study on FBSS.