• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.605-608
• /
• 2006

The recent application of wide band gap oxide semiconductors to transparent thin film transistors (TTFTs) is making a fast and growing (r)evolution on the contemporary solid-state electronics. In this paper we present some of the recent results we have obtained using wide band gap oxide semiconductors, like indium zinc oxide, produced by rf sputtering at room temperature. The devices work in the enhancement mode and exhibit excellent saturation drain currents. On-off ratios above $10^6$ are achieved. The optical transmittance data in the visible range reveals average transmittance higher than 80 %, including the glass substrate. Channel mobilities are also quite respectable, with some devices presenting values around $25\;cm^2/Vs$, even without any annealing or other post deposition improvement processes. The high performances presented by these TTFTs associated to a high electron mobility, at least two orders of magnitude higher than that of conventional amorphous silicon TFTs and a low threshold voltage, opens new doors for applications in flexible, wearable, disposable portable electronics as well as battery-powered applications.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권9호
• /
• pp.969-977
• /
• 1996

본고에서는 여러가지 Wide Band-gap중에서 특히 최근에 많은 관심을 끌고 있는 GaN와 4H-SiC, 6H0SiC의 전자기적 물성을 소개하고 현재 이들로부터 제작된 prototype소자들의 성능을 비교함으로써 그 발전현황을 알아보기로 한다. 본고에서 관심을 두는 소자분야는 광전소자(optoelectronic devices)라기보다는 고주파 고출력용 전력소자임을 밝힌다. 아울러 GaN로부터 제작된 MESFET(MEtal Semiconductor Field-Effect Transistor)소자의 고주파 대역에서의 Large-Signal특성을 Device/Circuit Model을 통하여 실험치와 비교하여보고 이로부터 최적화된 channel 구조를 갖는 소자구조에서의 RF특성을 조사한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.3-6
• /
• 2004

반도체 디자인, 공정 기술 및 패기지 기술의 발달에 따라 전력용 반도체는 소형화, 고성능화, 지능화하고 있다. 고속 구동이 용이한 때문에 MOSFET이나 IGBT등의 MOS-gate형 전력 반도체의 발전이 두드려지며, trench, charge balance, NPT 기술등이 패키지 기술과 더불어 이를 위한 주요 기술이 될것으로 보인다. SiC나 GaN등의 Wide Band Gap 물질들을 사용한 차세대 전력 반도체 연구도 활발히 진행되고 있다.

• 마이크로전자및패키징학회지
• /
• 제26권3호
• /
• pp.15-22
• /
• 2019

In these days, importance of the power electronic devices and modules keeps increasing due to electric vehicles and energy saving requirements. However, current silicon-based power devices showed several limitations. Therefore, wide band gap (WBG) semiconductors such as SiC, GaN, and $Ga_2O_3$ have been developed to replace the silicon power devices. WBG devices show superior performances in terms of device operation in harsh environments such as higher temperatures, voltages and switching speed than silicon-based technology. In power devices, the reliability of the devices and module package is the critically important to guarantee the normal operation and lifetime of the devices. In this paper, we reviewed the recent trends of the power devices based on WBG semiconductors as well as expected future technology. We also presented an overview of the recent package module and fabrication technologies such as direct bonded copper and active metal brazing technology. In addition, the recent heat management technologies of the power modules, which should be improved due to the increased power density in high temperature environments, are described.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.427-431
• /
• 2018

본 논문에서는 최근 전력반도체 산업에서 활용되어지는 와이드밴드갭 반도체 중에 하나인 $Ga_2O_3$를 이용한 에피웨이퍼 성장에 관련되어 서술하였다. GaN 성장시 활용되어지는 HVPE법을 이용하여 Sn이 도핑된 $Ga_2O_3$ 기판웨이퍼에 평균 $5.3{\mu}m$ 두께로 성장시켰다. 일반적으로 화합물반도체의 에피 두께가 $5{\mu}m$일 경우 SiC의 경우 600V 전력반도체소자를 제작할 수 있으며, $Ga_2O_3$ 에피웨이퍼의 경우에는 1000V이상의 전력소자를 제작할 수 있다. 성장된 에피웨이퍼의 J-V 측정 결과 $2.9-7.7m{\Omega}{\cdot}cm^2$의 온저항을 얻을 수 있었으며, 역방향의 경우 상당히 높은 전압에서도 누설전류가 거의 없음을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.204.2-204.2
• /
• 2013

Wide band gap II-VI semiconductors have attracted the interest of many research groups during the past few years due to the possibility of their applications in light-emitting diodes and laser diodes. Among the II-VI semiconductors, ZnO is an important optoelectronic device material for use in the violet and blue regions because of its wide direct band gap (Eg ~3.37 eV) and large exciton binding energy (60 meV). F-doped ZnO (FZO) and undoped ZnO thin films were grown onto quartz substrate by the sol-gel spin-coating method. The doping level in the solution, designated by F/Zn atomic ratio of was varied from 0 to 5 in 1 steps. To investigate the effects of the structure and optical properties of FZO thin films were investigated using X-ray diffraction (XRD), UV-visible spectroscopy, and photoluminescence (PL). In the XRD, the residual stress, FWHM, bond length, and average grain size were changed with increasing the doping concentration. For the PL spectra, the high INBE/IDLE ratio of the FZO thin films doping concentration at 1 at.% than the other samples.

• 한국재료학회지
• /
• 제26권6호
• /
• pp.347-352
• /
• 2016

ZnO with wurtzite structure has a wide band gap of 3.37 eV. Because ZnO has a direct band gap and a large exciton binding energy, it has higher optical efficiency and thermal stability than the GaN material of blue light emitting devices. To fabricate ZnO devices with optical and thermal advantages, n-type and p-type doping are needed. Many research groups have devoted themselves to fabricating stable p-type ZnO. In this study, $As^+$ ion was implanted using an ion implanter to fabricate p-type ZnO. After the ion implant, rapid thermal annealing (RTA) was conducted to activate the arsenic dopants. First, the structural and optical properties of the ZnO thin films were investigated for as-grown, as-implanted, and annealed ZnO using FE-SEM, XRD, and PL, respectively. Then, the structural, optical, and electrical properties of the ZnO thin films, depending on the As ion dose variation and the RTA temperatures, were analyzed using the same methods. In our experiment, p-type ZnO thin films with a hole concentration of $1.263{\times}10^{18}cm^{-3}$ were obtained when the dose of $5{\times}10^{14}$ As $ions/cm^2$ was implanted and the RTA was conducted at $850^{\circ}C$ for 1 min.

• 한국재료학회지
• /
• 제33권11호
• /
• pp.491-496
• /
• 2023

As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 ℃ The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.11-17
• /
• 2003

DC characteristics of recessed gate 4H-SiC MESFET were investigated using the device/circuit simulation tool, PISCES. Results of theoretical calculation were compared with the experimental data for the extraction of modeling parameters which were implemented for the prediction of DC and gate leakage characteristics at high temperatures. The current-voltage analysis using a fixed mobility model revealed that the short channel effect is influenced by the defects in SiC. The incomplete ionization models are found out significant physical models for an accurate prediction of SiC device performance. Gate leakage is shown to increase with the device operation temperatures and to decrease with the Schottky barrier height of gate metal.

• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.63-70
• /
• 2023

오늘날 심각한 환경 오염과 에너지의 중요성으로 전력 반도체의 중요도가 지속적으로 높아지고 있다. 특히 wide band gap(WBG)소자 중 하나인 SiC-MOSFET은 우수한 고전압 특성을 가지고 있어 그 중요도가 매우 높다. 하지만 SiC-MOSFET의 전기적 특성이 열에 민감하기 때문에 패키지를 통한 열 관리가 필요하다. 본 논문에서는 기존 전력 반도체에서 사용하는 direct bonded copper(DBC) 기판 방식이 아닌 insulated metal substrate(IMS) 방식을 제안한다. IMS는 DBC에 비해 공정이 쉬우며 coefficient of thermal expansion (CTE)가 높아서 비용과 신뢰성 측면에서 우수하다. IMS의 절연층인 dielectric film의 열전도도가 낮은 문제가 있지만 매우 얇은 두께로 공정이 가능하기 때문에 낮은 열 전도도를 충분히 극복할 수 있다. 이를 확인하기 위해서 이번 연구에서는 electric-thermal co-simulation을 수행하였으며 검증을 위해 DBC 기판과 IMS를 제작하여 실험하였다.