• Journal of Life Science
• /
• v.20 no.7
• /
• pp.999-1004
• /
• 2010

Investigations were carried out on a $\beta$-glucosidase produced by Aspergillus niger under solid-state fermentation conditions as a model of enzyme recovery from fermented wheat bran. The leaching efficiency of distilled water to recover the enzyme from the fermented bran was higher than acetate buffer, citrate buffer, citrate-phosphate buffer and 5% methanol; thus, the conditions were further optimized with distilled water as the extracting agent. After fermented bran was washed three times with distilled water for 1.5 hr each under shaking conditions at 1:5 solid to solvent ratio, a maximum recovery of 0.025 U/g of wheat bran was obtained.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.290-293
• /
• 2003

To measure an effects of strontium on secretion of ${\alpha}$-amylase and RNase, wheat aleurone layers were isolated after the pre-incubation in a solution with or without 10 mM $SrCl_2$ or $CaCl_2$ for 3 days at $25^{\circ}C$ in the dark under aseptic conditions. The secretion of ${\alpha}$-amylase reached a maximum at 72 h after incubation. $Sr^{2+}$ induced more effectively secretion of ${\alpha}$-amylase than $Ca^{2+}$. The ${\alpha}$-amylase secretions by $Sr^{2+}$ or $Ca^{2+}$ ware about $2 (Ca^{2+})$ to $2.5 (Sr^{2+})$ fold higher than it without divalent ions, When aleurone layers were incubated without divalent ions, however, the ${\alpha}$-amylase was remarkably retained in the tissues. Total ${\alpha}$-amylase synthesis (ie. tissues + media) was slightly lowered by 10mM $SrCl_2$ addition. It seemed that the RNase secretion begins at 18 h after incubation. This meaned that the RNase secretion may process slower than ${\alpha}$-amylasee secretion. $Ca^{2+}$ effect on RNase secretion is stronger than $Sr^{2+}$ unlikely to ${\alpha}$-amylase. The secretion process is likely to be suddenly induced between 72 hand 96 h. These results suggested that the secretion was enhanced after the accumulation in aleurone layers.

• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.410-417
• /
• 2017

The effect of dietary fiber enrichment (wheat bran) and cooking methods (oven, steam and microwave) on functional and physico-chemical properties of raw nuggets formulation as well as nutritional, color and textural properties of chicken nuggets were analyzed in this study. Among different cooking methods used for nuggets preparation, steam cooked nuggets had significantly (p<0.05) higher water holding capacity (56.65%), cooking yield (97.16%) and total dietary fiber content (4.32%) in comparison to oven and microwave cooked nuggets. The effect of cooking methods and wheat bran incorporation was also noticed on textural properties of the nuggets. Hardness, firmness and toughness values of oven and steam cooked nuggets were significantly (p<0.05) higher than microwave cooked nuggets. Among nuggets prepared by different cooking methods, cohesiveness of microwave cooked nuggets was found to be significantly (p<0.05) highest, whereas, oven cooked nuggets had significantly (p<0.05) highest gumminess and chewiness values. Steam cooked nuggets were found to be better among all nuggets due to their higher cooking yield and dietary fiber content.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.138-146
• /
• 1999

Textural properties of the cooked wheat noodles prepared from 5 Korean wheat varieties (Woori, Yeunpa, Allgeuru, Geuru, and Tapdong), and 3 foreign wheat varieties (ASW, WW and DNS) were evaluated by mechanical and sensory analyses, and their correlations to the physicochemical properties of the flours were examined. Cooking loss for noodle was negatively correlated with protein content, and weight increase during cooking showed a positive correlation with damaged starch content. From the mechanical tests, hard wheats (Tapdong and DNS) showed greater values for hardness, chewiness and tensile strength of the noodles than soft wheats. Foreign soft wheats (ASW and WW) showed relatively lower values for these attributes than the Korean soft wheats. Among the mechanical tests, multi-blade compression shear test had better correlations to the sensory characteristics than 10% compression, repeated compression and tensile tests. Among the flour characteristics, protein content was the most determining factor for the textural properties of noodle. Amylose increased the tenderness and slipperiness, but decreased internal firmness of the noodle. The Korean soft wheat noodles showed relatively darker color for the cooked noodle than WW or ASW. From acceptability test for noodle, Geuru was most preferred among the tested wheat varieties.

• Food Science of Animal Resources
• /
• v.37 no.1
• /
• pp.52-61
• /
• 2017

The objective of this study was to investigate the effects of different concentrations of WSP (wheat sprout powder) and ISP (isolated soy protein) on the quality of breakfast sausage. Treatments were formulated as follows: Control, T1 (2.0% ISP), T2 (1.5% ISP + 0.5% WSP), T3 (1.0% ISP + 1.0% WSP), T4 (0.5% ISP + 1.5% WSP) and T5 (2.0% WSP). The treatments were analyzed for color, pH, cooking loss, emulsion stability, protein solubility, viscosity, texture properties and sensory evaluation. Lightness and redness were reduced and yellowness was increased as increased level of WSP, due to the dark green color of WSP (p<0.05). The pH values of all samples were affected by WSP which has lower pH (p<0.05). The emulsion stability and cooking loss of treatments were improved with increasing level of WSP (p<0.05). The protein solubility, viscosity and overall texture properties of the sausage indicated significant differences in relation to the level of WSP and ISP (p<0.05). The sensory evaluation indicated that the greatest flavor and overall acceptability in sausage was achieved at WSP 1% combination with ISP 1% (T3) (p<0.05). Therefore, these results indicate that breakfast sausage containing 1% WSP and 1% ISP is the optimal formulation, taking into consideration the overall physico-chemical properties and sensory evaluation.

• Journal of Forest and Environmental Science
• /
• v.31 no.4
• /
• pp.297-302
• /
• 2015

With the intention to solve environmental problems caused by synthetic plastics from petroleum resources, biodegradable polyurethane foams and thermosetting moldings were prepared from biomass, such as wood and wheat bran by liquefaction method. Biodegradability of these biomass-based polymeric materials was investigated. In activated sludge, polyurethane foams from liquefied wheat bran and thermosetting molding from phenolated wood were decomposed approximately 14% and 29% for 20 days, respectively. One of the wood fungi, Coriolus versicolor was able to grow without supplemental nutrition, only with distilled water and polyurethane foam as a nutrition source. Risk assessments were also conducted and results showed that estrogenicity, mutagenicity, and carcinogenicity were not observed in the extractives of biomass- based polymeric materials.

• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.16-24
• /
• 1973

Breads were made from composite flours based on domestic resources and their quality was assessed to obtain the following results. 1) When barley bread was made according to the formula for standard wheat bread, its specific loaf volume (SLV) was quite low (1.3 at 100% addition of water) in comparison with 3.3 for wheat bread. Addition of 10% defatted soy flour increased its SLV to 1.7 (at 100% water). Among various flour-improving additives, the use of 1.5% GMS + 0.5% CSL gave best results (SLV: 2.0 at 100% water). Admixture of wheat flour with the composite flour based on barley was most effective. Replacement of barley flour with 25% wheat flour gave SLV of 2.8 (at 90% water) and that with 50% wheat flour gave SLV of 3.2 (at 90% water), comparable to standard wheat bread with respect to loaf volume, color and texture. 2) Sweet potato bread had the characteristics of turning black-brown on baking. Use of 20% defatted soy flour and GMS + CSL gave higher SLV (1.9 at 100% water). Addition of wheat flour at 25% or 50% level to the composite flour based on sweet potato flour gave SLV of 2.3 and 2.6, respectively, at 90% water and its color and texture were improved 3) Potato flour was different from sweet potato flour in baking, the effect of GMS + CSL being quite low. Bread from corn flour was different from barley flour bread and defatted rice bran was not suitable for bread-making. 4) Bread was made from following composite flours based on naked barley and sweet potato flours along with the use of proper additives: (a) naked barley flour + defatted soy flour + wheat flour (45 : 10 : 45) (b) naked barley flour + defatted soy flour + wheat flour (67 : 10 : 23) (c) naked barley flour + defatted soy flour (90 : 10) (d) sweet potato flour + defatted soy flour + wheat flour (40 : 20 : 40) (e) sweet potato flour + defatted soy flour (60 : 20 : 20) Sensory evaluation of above breads in comparison with standard wheat bread (So) gave the following decreasing order of scores, So>(a)>(b)>(c)>(e)>(d) and Duncan's multiple range test showed that bread (a) was not different from standard wheat bread significantly at 5% level, in overall evaluation including color, texture, taste and flavor.

• Microbiology and Biotechnology Letters
• /
• v.43 no.4
• /
• pp.378-384
• /
• 2015

Nuruk is a fermentation agent, which has been used for the production of traditional Korean alcoholic beverages. The objective of this study was to investigate the effects of temperature on nuruk fermentation. One wheat nuruk sample was fermented at $36^{\circ}C$ for 30 days (TN-A) and another at $45^{\circ}C$ for 10 days followed by $36^{\circ}C$ for 20 days (TN-B). The activities of ${\alpha}$-amylase, glucoamylase, and acidic protease, as well as metabolite contents were measured. Initially, the enzymatic activities increased rapidly regardless of the fermentation temperature. After 3 days of fermentation, the enzymatic activities were maintained in TN-A, but gradually decreased in TN-B until the end of fermentation process. Metabolite analysis using $^1H$-NMR showed that the levels of glucose, glycerol, fructose, mannitol, and lactose initially increased quickly and then decreased in TN-A. However, they initially decreased and then were maintained over the fermentation period in TN-B. The contents of glycine, proline, and serine were higher in TN-A than in TN-B. This study suggests that a constant temperature of approximately $36^{\circ}C$ is appropriate for achieving high amylolytic and proteolytic activities in the production of wheat nuruk.

• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.226-244
• /
• 2015

Fusarium head blight is one of the most important and most common diseases of winter wheat. In order to better understanding this disease and to assess the correlations between different factors, 30 cultivars of this cereal were evaluated in a two-year period. Fusarium head blight resistance was evaluated and the concentration of trichothecene mycotoxins was analysed. Grain samples originated from plants inoculated with Fusarium culmorum and naturally infected with Fusarium species. The genetic distance between the tested cultivars was determined and data were analysed using multivariate data analysis methods. Genetic dissimilarity of wheat cultivars ranged between 0.06 and 0.78. They were grouped into three distinct groups after cluster analysis of genetic distance. Wheat cultivars differed in resistance to spike and kernel infection and in resistance to spread of Fusarium within a spike (type II). Only B trichothecenes (deoxynivalenol, 3-acetyldeoxynivalenol and nivalenol) produced by F. culmorum in grain samples from inoculated plots were present. In control samples trichothecenes of groups A (H-2 toxin, T-2 toxin, T-2 tetraol, T-2 triol, scirpentriol, diacetoxyscirpenol) and B were detected. On the basis of Fusarium head blight assessment and analysis of trichothecene concentration in the grain relationships between morphological characters, Fusarium head blight resistance and mycotoxins in grain of wheat cultivars were examined. The results were used to create of matrices of distance between cultivars - for trichothecene concentration in inoculated and naturally infected grain as well as for FHB resistance Correlations between genetic distance versus resistance/mycotoxin profiles were calculated using the Mantel test. A highly significant correlation between genetic distance and mycotoxin distance was found for the samples inoculated with Fusarium culmorum. Significant but weak relationships were found between genetic distance matrix and FHB resistance or trichothecene concentration in naturally infected grain matrices.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.5
• /
• pp.346-355
• /
• 2005

To investigate the application of biochemical markers' and small-sample methods using whole-wheat flours for screening in early generation in Korean wheat breeding system, 74 Korean wheats, including cultivars, local breeding lines and experimental lines, were analyzed. Seed storage protein and amylose contents of grains were evaluated. Biochemical makers, including granule bound starch synthase (GBSS), high molecular weigh glutenin subunits (HMW-GS) and friabilin were also evaluated by using one-dimensional sodium dodecyl sulfate-polyacryla-mide gel electrophoresis with a single kernel. The small­sample methods, including modified SDS-sedimentation test (MST), micro-alkaline water retention capacity (AWRC) and whole-wheat flour swelling volume (WSV) were also tested in this study. Protein content, MST and AWRC was $11.0 - 15.8\%$, 2.7 - 26.2 ml and $71.9 - 109.7\%$, respectively. Apparent and total amylose content and WSV was $20.6 - 25.0\%$, $26.1 - 32.4\%$ and 9.0 - 16.9 ml, respectively. There were highly significant correlations between MST and AWRC (r=0.592, P<0.001), but Korean wheats showed no significant difference in protein content, amylose content and small-sample methods. In the biochemical markers, Korean wheats contained all three GBSS encoded by Wx loci, except for Suwon 252. Korean wheats showed the high frequency ($58.1\%$) of 1Dx2.2 + 1Dy12 subunits of HMW-GS. Friabilin band was present in 46 lines ($62.2\%$) and absent in 28 lines ($37.8\%$). Friabilin-absence lines showed the higher MST (14.9 ml) and AWRC ($92.1\%$) value than friabilin-presence lines (8.5 ml and $82.4\%$, respectively).