• 한국소음진동공학회논문집
• /
• 제22권3호
• /
• pp.253-263
• /
• 2012

With the local Hertz deformation on the contact point, the dynamic contact between a high-speed wheel and an elastic beam having a gap is numerically analyzed by solving the whole equations of motion of the wheel and the beam subjected to the contact condition. For the stability of the time integration the velocity and acceleration constraints as well as the displacement constraint are imposed on the contact point. Especially the acceleration contact condition on the gap is formulated, and it is demonstrated that the contact force variation computed by the velocity contact constraint or by the acceleration contact constraint agrees well with that computed by the displacement contact constraint. The numerical examples show that, when the wheel passes on the gap, the solution is governed by the stiffness of the local Hertzian deformation.

• 통합자연과학논문집
• /
• 제6권3호
• /
• pp.183-186
• /
• 2013

Well defined 1-dimentional (1-D) photonic crystals of polystyrene replicas have been successfully obtained by removing the porous silicon from the free-standing rugate porous silicon/phenylmethylpolysiloxane composite film. Rugate porous silicon was prepared by an electrochemical etching of silicon wafer in HF/ethanol mixture solution. Exfoliated rugate porous silicon was obtained by an electropolishing condition. A composite of rugate porous silicon/phenylmethylpolysiloxane composite film was prepared by casting a toluene solution of phenylmethylpolysiloxane onto the top of rugate porous silicon film. After the removal of the template by chemical dissolution, the phenylmethylpolysiloxane castings replicate the photonic features and the nanostructure of the master. The photonic phenylmethylpolysiloxane replicas are robust and flexible in ambient condition and exhibit an excellent reflectivity in their reflective spectra. The photonic band gaps of replicas are narrower than that of typical semiconductor quantum dots.

• 한국전산유체공학회지
• /
• 제1권1호
• /
• pp.123-141
• /
• 1996

In this paper the upwind flux difference splitting Navier-Stokes method has been applied to study the perfect gas and the equilibrium chemically reacting hypersonic flow over an axisymmetric sphere-cone(5°) geometry. The effective gamma(γ), enthalpy to internal energy ratio was used to couple chemistry with the fluid mechanics for equilibrium chemically reacting air. The test case condition was at altitude(30km) and Mach number(15). The equilibrium shock thickness over the blunt body region was much thinner than that of perfect gas shock. The pressure difference between perfect gas and equilibrium gas was about 3 ∼ 5 percent. The heat transfer coefficient were also calculated. The results were compared with VSL results in order to validate the current numerical analysis. The results from current method were compared well VSL results ; however, not well at near nose. The proper boundary condition and grid system will be studied to improve the solution quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.562-565
• /
• 2008

Measuring system for piezo inkjet droplet and ink jetting status was developed. In order to measure the jetting performance, two different approaches have been used. One is to use the self-sensing capability of the piezo actuator in the printhead. The other is to use the droplet image from a CCD camera. The software as well as hardware using two approaches was developed. The self-sensing signal as well as meniscus motion was shown to be useful in monitoring jetting conditions. Furthermore, ink properties such as viscosity and speed of sound, which is related to jetting performance, can be understood.

• 콘크리트학회논문집
• /
• 제15권2호
• /
• pp.352-359
• /
• 2003

Portland cement concrete (PCC) pavements are more durable and have superior surface friction compared to most dense-graded asphalt. However, data collected to date generally show PCC pavements to create more noise than asphaltic surfaces. Recent research has shown that some of the new concrete pavement textures are worthy of further examination. One of these, exposed aggregate surfaces, appear to provide better noise quality characteristics as well as good frictional characteristics and durability. In this paper, we considered the relationship between noise level and various textures of exposed aggregate concrete (EAC) pavement by tire impact noise measurement. As the results of that, it was suggested that optimum surface texture and manufacturing condition of EAC in order to reduce tire and pavement interaction noise. Conclusively, we would like to recommend optimum condition of EAC pavement at the respects of materials and treatment. Furthermore, Frequency spectrum as well as A-weighted noise level was also evaluated to analyze properties of noise between PCC and EAC.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.210-215
• /
• 1994

In the CMOS device, Counter doping is needed to adjust threshold voltage because of the difference between n-MOSFET and p-MOSFET well doping concentration when n+ polysilicon gate is used. Therefore buried channel is formed in the p-channel MOSFET degrading properties. So well doping concentration and doping condition should be considered in fabrication process and device design. Here we are to extract the initial process condition using simulation and fabricate p-MOSFET device and then compare the subthreshold characteristics of simulated and fabricated device.

• Structural Engineering and Mechanics
• /
• 제43권2호
• /
• pp.211-223
• /
• 2012

This paper deals with large deformation post-buckling of a linear-elastic and hygrothermal beam with axially nonmovable pinned-pinned ends and subjected to a significant increase in swelling by an alternative method. Analytical approximate solutions for the geometrically nonlinear problem are presented. The solution for the limiting case of a string is also obtained. By coupling of the well-known Maclaurin series expansion and orthogonal Chebyshev polynomials, the governing differential equation with sinusoidal nonlinearity can be reduced to form a cubic-nonlinear equation, and supplementary condition with cosinoidal nonlinearity can also be simplified to be a polynomial integral equation. Analytical approximations to the resulting boundary condition problem are established by combining the Newton's method with the method of harmonic balance. Two approximate formulae for load along axis, potential strain for free hygrothermal expansion and periodic solution are established for small as well as large angle of rotation at the end of the beam. Illustrative examples are selected and compared to "reference" solution obtained by the shooting method to substantiate the accuracy and correctness of the approximate analytical approach.

• 디지털콘텐츠학회 논문지
• /
• 제10권2호
• /
• pp.299-307
• /
• 2009

우리가 일상에서 보고 있는 전경의 기시거리는 대기질의 청정상태와 밀접한 관련이 있는 것으로 알려져 있다. 최근에 이들의 관계를 보다 구체적으로 나타내기 위하여 미국의 IMPROVE 기관에서는 대기의 오염물질 구성 농도에 따른 시정거리를 유추할 수 있는 알고리즘을 개발하였다. 이에 본 논문에서는 대기질의 변화에 따른 대기오염의 상태를 화학물질의 정량적인 표현식으로 나타내는데서 나아가 IMPROVE 모델을 통해 유추된 시정거리를 중심으로 관심지역의 시정영상과 연계함으로 화학적 지식이 없는 일반인들도 오염상태를 시각적으로 실감할 수 있게 대기오염 알림판을 구축할 수 있는 프로그램을 구현하였다.

• 한국자원식물학회지
• /
• 제32권3호
• /
• pp.237-243
• /
• 2019

Soybean is the one of recalcitrant legume species for shoot induction. Shoot regeneration via direct organogenesis was investigated in five soybean cultivars, 'Dawon', 'Pungsan', 'Daewon', 'Taekwang' and 'Chongdoo 1' by using cotyledonary node explants. Out of 5 soybean cultivars, an efficient shoot regeneration condition was developed in the two soybean cultivars, 'Dawon' and 'Pungsan'. When various kinds of plant growth regulators with different concentration were estimated, the optimum medium condition for shoot induction in both soybean cultivars was MS + B5 vitamin supplemented with BA at concentration 2 mg/L. In addition, shoot formation efficiency was increased with 97.09% and 93.88% by the pretreatment of BA onto the explants before in vitro culture in both cultivars. Shoot induction in 'Dawon' cultivar was originated from epidermal tissue and sub-epidermal layers when histological changes were investigated under shoot regeneration after culturing cotyledonary node segments on shoot induction medium for 0 to 21 days. Especially, cell dedifferentiation was observed from parenchyma cells to meristematic cell in 3-day cultured segments.

• 한국정밀공학회지
• /
• 제12권11호
• /
• pp.82-90
• /
• 1995

This paper pressents a condition-based maintenance (CBM) method through bibration analysis. The well known frequency analysis is employed for performing machine fault diagnosis. The statistical control chart is also applied for analyzing the trend of the bearing wear. Vibration sensors are attached to prototype machine and signals are continuously monitored. The sampled data are utilized to evaluate how well the fast fourier transform(FFT) and the statistical control chart techniques could be used to identify defects of machine and to analyze the machine degradation. Experimental results show that the propowed approach could classify every mal-function and could be utilized for real machine diagnosis system.