• 한국해양공학회지
• /
• 제30권4호
• /
• pp.320-326
• /
• 2016

Rip current forecasts, based on intensity, are marked in four levels—notice, watch, warning, and danger. However, numerical results are represented by current vectors, whose magnitudes are then converted into predictive levels. In the present study, the rose diagram is adapted as a determinative forecasting index and examined for the case of an ideal rip channel consisting of surface, bottom, and averaged currents. Further, it is employed in the sensitivity analysis of wave-induced currents generated by wave conditions at the Haeundae Beach. The simulation of surface onshore and bottom undertow currents is accomplished by including a mass flux term in the wave-averaged continuity equation.

• 한국해안해양공학회지
• /
• 제12권4호
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• 수산해양교육연구
• /
• 제28권4호
• /
• pp.947-956
• /
• 2016

This study analysed the documents of Sea Area Utilization Consultation of JongChun and ApHae located in West Coast of Korea and NaJeong located in East Coast of Korea in order to find out problems of site surveys and numerical simulations for coastal erosion projects of ocean physics, and suggested the improvement way to go. Current especially like wave-induced current is the one of the important external forces to handle coastal erosion but underestimated in the west coast. In case of east coast the various tests including wave-induced current were conducted but less efficient to find out the reasons of coastal erosion. The stiffness structure to protect coastal line like beach made the secondary erosion by using them without sufficient analysis for the erosion. In order to consult a Sea Area Utilization Consultation those are needed to review the scenarios for external forces such as wave and tidal currents, the site surveys for external forces, the net sediment analysis for years, the long periods of monitoring, and the guide line and revision of the rule for coastal erosion.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.498-504
• /
• 2016

In this study, to predict the effect of beach nourishment at Haeundae Beach, the waves and wave-induced currents were compared before and after beach nourishment using the XBEACH model. Representative wave conditions were determined for the data observed during 2014 (KHOA). Then, the Hs,max and Hs,1/10 values, and their prevalent directions, were used in the numerical modeling input data. A variable grid system was used for the $5km{\times}2.5km$ model areas, and irregular waves based on the JONSWAP spectrum were given as incident wave conditions. In the summer season, eastward wave-induced currents were developed along the beach by the incident wave direction. Before the beach nourishment, the maximum speed around the surf zone was 1.2-1.5 m/s in the central zone of the beach, whereas the maximum speed increased to 1.4-1.6 m/s at the same areas when the currents toward Mipo Harbor were blocked as an effect of the groins after the beach nourishment. In the winter season, westward wave-induced currents were developed along the beach by the incident wave direction. After the beach nourishment, the maximum current speed increased slightly around the surf zone in the central area of the beach, and the littoral current speed decreased at the submerged breakwaters located at Dongbaek Island. As a result, after the beach nourishment, the maximum wave-induced currents increased about 10% in the surf zone of the central area of the beach.

• 한국해안·해양공학회논문집
• /
• 제27권6호
• /
• pp.406-418
• /
• 2015

기존 FUNWAVE-TVD 버전 2.1 모형을 수정한 본 모형의 검증을 위해 고립파 실험, Vincent and Briggs(1989)의 비쇄파 및 쇄파 실험, Luth et al. (1994)의 수리실험을 수행하였다. 쇄파 실험의 경우 기존 결과와 비교하기 위하여 eddy viscosity를 이용한 쇄파 방법도 포함하였다. Eddy viscosity 쇄파 방법을 이용하여 Vincent and Briggs(1989)의 쇄파 실험에 적용한 결과 수정된 모형에서는 수중천퇴 중심의 y축을 기준으로 파랑류(wave-induced current)의 대칭성이 유지되었으나 FUNWAVE-TVD 버전 2.1 모형에서는 대칭성이 유지되지 않았다. 또한 eddy viscosity 쇄파 방법을 이용한 경우가 천수방정식으로 전환하여 쇄파를 모의하는 방법보다 관측치에 더 가깝다. 그리고 FUNWAVE-TVD 버전 2.1 모형에 사용한 기법들과 비교하기 위하여 Erduran et al.(2005)이 제시한 4차 정확도의 MUSCL-TVD 기법과 minmod limiter를 이용한 3차 정확도의 기법을 적용하여 고립파의 전파 양상을 비교 검토하였다.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권3호
• /
• pp.26-36
• /
• 2003

낙동강 하구의 사주 발달 과정을 과거 관측 자료를 토대로 분석하고, 수치해석기법을 도입하여 파랑의 변화와 이로 인한 해빈류를 계산하여 낙동강 하구역 및 그 인접해역에서의 3차원적인 지형변화를 예측, 하구의 해안선 변화와 사주의 발달과정을 관련시켜 보았다. 실제 지형변화와 수치 실험의 결과를 분석해 본 결과, 이들 해역에서의 해안선 변화 및 사주의 발달은 하구둑의 건설과 같은 인위적인 요소 외에 해빈류의 영향이 크게 작용하며, 장래에는 진우등 하단부와 다대포 해수욕장 전면에서 사주의 발달과 이동이 예상된다.

• Korean Journal of Hydrosciences
• /
• 제1권
• /
• pp.73-97
• /
• 1990

A literature review is made on the numerical models of wave-induced currents. The major processes of the flow system are wave breaking, bottom friction of combined wave-current flow and mixing processes primarily caused by wave breaking as well as the flow fields of waves and currents themselves. The survey is given to each item with great emphasis on numerical implication as well as physical mechanism. As noted is the importance in recent investigations, a brief treatment is also given on the currents driven by random or spectral waves.

• Structural Engineering and Mechanics
• /
• 제82권4호
• /
• pp.491-502
• /
• 2022

A model experiment with a scale of 1:150 has been conducted to investigate the dynamic responses of a freestanding four-column bridge tower subjected to regular wave, random wave and coupled wave-current actions. The base shear forces of the caisson foundation and the dynamic behaviors of the superstructure were measured and analyzed. The comparisons of the test values with the theoretical values shows that wave-induced base shear forces on the bridge caisson foundation can be approximated by using a wave force calculation method in which the structure is assumed to be fixed and rigid. Although the mean square errors of the base shear forces excited by joint random wave and current actions are approximately equal to those excited by pure random waves, the existence of a forward current increases the forward base shear forces and decreases the backward base shear forces. The tower top displacements excited by wave-currents are similar to those excited by waves, suggesting that a current does not significantly affect the dynamic responses of the superstructure of the bridge tower. The experiment results can be used as a reference for similar engineering design.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1515-1527
• /
• 2018

This paper presents a sensorless speed control of IPMSM (Interior Permanent Magnet Synchronous Motor) using the high-frequency (HF) square wave injection method. In the proposed HF pulsating square wave injection method, injection voltage is applied into the estimated d-axis of rotor and high-frequency induced q-axis current is considered to estimate the rotor position. Conventional square wave injection methods may need complex demodulation process to find rotor position, while in the proposed method, an easy demodulation process based on the rising-falling edge of the injected voltage and carrier induced q-axis current is implemented, which needs less processing time and improves control bandwidth. Unlike some saliency-based sensorless methods, the proposed method uses maximum torque per ampere (MTPA) strategy, instead of zero d-axis command current strategy, to improve control performance. Furthermore, this paper directly uses resultant d-axis current to detect the magnet polarity and eliminates the need to add an extra pulse injection for magnet polarity detection. As experimental results show, the proposed method can quickly find initial rotor position and MTPA strategy helps to improve the control performance. The effectiveness of the proposed method and all theoretical concepts are verified by mathematical equations, simulation, and experimental tests.

• 한국해안해양공학회지
• /
• 제19권1호
• /
• pp.73-80
• /
• 2007

동해안에 위치한 어항이나 항만은 주 외력으로서 파랑이 탁월한 특징을 갖고 있다. 아울러, 동해안에 존재하는 강한 해빈류는 어항구조물 주변의 표사이동에 매우 큰 영향을 미친다. 따라서 동해안에 어항이나 항만을 건설할 때에는 설계 시에 해빈류에 기인한 항만 주변의 표사이동 특성을 명확히 검토해야 할 필요가 있다. 본 연구에서는 연도별 해안선변화에 대한 측량자료 및 방파제 주변의 상세 수심측량자료를 이용하여 방파제 시공순서가 항내매몰 및 주변 표사이동에 미치는 영향에 대하여 구체적으로 파악하고자 하였다. 그리고 동해안에 건설되는 어항구조물의 항내에 발생하는 퇴사량 감소를 위한 보다 효율성 있는 시공순서에 대하여 검토하였다.