• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.320-326
• /
• 2016

Rip current forecasts, based on intensity, are marked in four levels—notice, watch, warning, and danger. However, numerical results are represented by current vectors, whose magnitudes are then converted into predictive levels. In the present study, the rose diagram is adapted as a determinative forecasting index and examined for the case of an ideal rip channel consisting of surface, bottom, and averaged currents. Further, it is employed in the sensitivity analysis of wave-induced currents generated by wave conditions at the Haeundae Beach. The simulation of surface onshore and bottom undertow currents is accomplished by including a mass flux term in the wave-averaged continuity equation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.4
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.947-956
• /
• 2016

This study analysed the documents of Sea Area Utilization Consultation of JongChun and ApHae located in West Coast of Korea and NaJeong located in East Coast of Korea in order to find out problems of site surveys and numerical simulations for coastal erosion projects of ocean physics, and suggested the improvement way to go. Current especially like wave-induced current is the one of the important external forces to handle coastal erosion but underestimated in the west coast. In case of east coast the various tests including wave-induced current were conducted but less efficient to find out the reasons of coastal erosion. The stiffness structure to protect coastal line like beach made the secondary erosion by using them without sufficient analysis for the erosion. In order to consult a Sea Area Utilization Consultation those are needed to review the scenarios for external forces such as wave and tidal currents, the site surveys for external forces, the net sediment analysis for years, the long periods of monitoring, and the guide line and revision of the rule for coastal erosion.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.498-504
• /
• 2016

In this study, to predict the effect of beach nourishment at Haeundae Beach, the waves and wave-induced currents were compared before and after beach nourishment using the XBEACH model. Representative wave conditions were determined for the data observed during 2014 (KHOA). Then, the Hs,max and Hs,1/10 values, and their prevalent directions, were used in the numerical modeling input data. A variable grid system was used for the $5km{\times}2.5km$ model areas, and irregular waves based on the JONSWAP spectrum were given as incident wave conditions. In the summer season, eastward wave-induced currents were developed along the beach by the incident wave direction. Before the beach nourishment, the maximum speed around the surf zone was 1.2-1.5 m/s in the central zone of the beach, whereas the maximum speed increased to 1.4-1.6 m/s at the same areas when the currents toward Mipo Harbor were blocked as an effect of the groins after the beach nourishment. In the winter season, westward wave-induced currents were developed along the beach by the incident wave direction. After the beach nourishment, the maximum current speed increased slightly around the surf zone in the central area of the beach, and the littoral current speed decreased at the submerged breakwaters located at Dongbaek Island. As a result, after the beach nourishment, the maximum wave-induced currents increased about 10% in the surf zone of the central area of the beach.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.6
• /
• pp.406-418
• /
• 2015

The present modified FUNWAVE-TVD model, which is a modification to its previous version 2.1, is applied to solitary wave propagation and is tested against the experiments of Vincent and Briggs(1989) and Luth et al.(1994). The eddy viscosity breaking scheme is used for comparison with the existing study in the case of breaking experiment. The symmetry of wave-induced current is maintained when the modified model is employed to Vincent and Briggs(1989) breaking experiment, but the symmetry of wave-induced current in previous model is not maintained. A better agreement with the breaking experimental data is obtained in the modified model using eddy viscosity breaking scheme than the shock capturing breaking scheme using nonlinear shallow water equation. For comparison with the schemes in the model, the fourth order MUSCL-TVD scheme by Erduran et al.(2005) and the third order MUSCL-TVD scheme using minmod limiter is applied, and the numerical solutions of solitary wave are compared.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.3
• /
• pp.26-36
• /
• 2003

Collected and analyzed the coastal processes at the estuary of Nak-Dong river and its near coastal area from the history of field measurements. Introduced a numerical model to predict three dimensional topographical change which are evaluated from the nearshore wave and the wave induced current fields for the objective area, and later it were related to the development of beach and shoals. With the comparison between measured and calculated, we found that the changes on the coastline and sand spit and bar development are induced not only by artificial forces due to the construction of river dike, but also by the strong impact of wave induced current. In future days, it is expected that coastline change and sand bar development at the lee side of Jinwoo-Deung and at the front of Dadae beach.

• Korean Journal of Hydrosciences
• /
• v.1
• /
• pp.73-97
• /
• 1990

A literature review is made on the numerical models of wave-induced currents. The major processes of the flow system are wave breaking, bottom friction of combined wave-current flow and mixing processes primarily caused by wave breaking as well as the flow fields of waves and currents themselves. The survey is given to each item with great emphasis on numerical implication as well as physical mechanism. As noted is the importance in recent investigations, a brief treatment is also given on the currents driven by random or spectral waves.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.491-502
• /
• 2022

A model experiment with a scale of 1:150 has been conducted to investigate the dynamic responses of a freestanding four-column bridge tower subjected to regular wave, random wave and coupled wave-current actions. The base shear forces of the caisson foundation and the dynamic behaviors of the superstructure were measured and analyzed. The comparisons of the test values with the theoretical values shows that wave-induced base shear forces on the bridge caisson foundation can be approximated by using a wave force calculation method in which the structure is assumed to be fixed and rigid. Although the mean square errors of the base shear forces excited by joint random wave and current actions are approximately equal to those excited by pure random waves, the existence of a forward current increases the forward base shear forces and decreases the backward base shear forces. The tower top displacements excited by wave-currents are similar to those excited by waves, suggesting that a current does not significantly affect the dynamic responses of the superstructure of the bridge tower. The experiment results can be used as a reference for similar engineering design.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1515-1527
• /
• 2018

This paper presents a sensorless speed control of IPMSM (Interior Permanent Magnet Synchronous Motor) using the high-frequency (HF) square wave injection method. In the proposed HF pulsating square wave injection method, injection voltage is applied into the estimated d-axis of rotor and high-frequency induced q-axis current is considered to estimate the rotor position. Conventional square wave injection methods may need complex demodulation process to find rotor position, while in the proposed method, an easy demodulation process based on the rising-falling edge of the injected voltage and carrier induced q-axis current is implemented, which needs less processing time and improves control bandwidth. Unlike some saliency-based sensorless methods, the proposed method uses maximum torque per ampere (MTPA) strategy, instead of zero d-axis command current strategy, to improve control performance. Furthermore, this paper directly uses resultant d-axis current to detect the magnet polarity and eliminates the need to add an extra pulse injection for magnet polarity detection. As experimental results show, the proposed method can quickly find initial rotor position and MTPA strategy helps to improve the control performance. The effectiveness of the proposed method and all theoretical concepts are verified by mathematical equations, simulation, and experimental tests.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.73-80
• /
• 2007

The predominant factor considered in the design of harbors in the East Coast of Korea is wave propagating onshore. Also, the strong wave induced current on the east coast have the biggest influence on sediment transport around the harbor structure. Therefore, a consideration of wave induced current due to waves should take place on design when constructing a harbor on east coast. In this study, we studied on the influences of construction procedure on harbor siltation using annual coastal line data and bathymetry data near breakwater. And, this study focused on investigation of the construction procedure for the best way to decrease harbor siltation.