• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.27-32
• /
• 2012

Generally, hair treatments by complementary actions to give a sense of activity are permanent setting, dyeing, and bleaching, etc. In this study, we investigated the wave formation ability and hair damage occuring in permanent setting and bleaching process. The wave formation ability was evaluated by the differences of length and curl diameter after permanent setting. And the hair damage was also evaluated by the protein release ability and SEM of hair. The bleached hair immediately after permanent setting treatment has better wave formation ability, but much more damaged than the bleached hair after rinsing thoroughly with warm water. It was considered that the chain of hair keratin broke down easily by the bleaching action in the existence of permanent setting agents.

• Textile Coloration and Finishing
• /
• v.24 no.3
• /
• pp.213-220
• /
• 2012

In this study, we investigated the effect of natural vegetable treatment agent on the bleaching and damage of human hair during permanent wave formation. The vegetable treatment agent was prepared by fermenting the mixture of tea leaves (10g), black rice (100g), black bean (100g), corn (100g), malt (50g), and water(500g) at room temperature for 1 week. The degree of bleaching and damage was checked by Munsell value 'L' and morphological changes of hair in FE-SEM. When the hair was bleached, the Munsell value 'L' was almost same regardless of adding the vegetable treatment to the bleaching solution. But when the hair was permanently waved, the curl formation ability was high and the damage was low in the case of adding the vegetable treatment. This means that the vegetable treatment covers the scale of hair and protects the hair from the chemicals.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.3
• /
• pp.119-123
• /
• 2011

Carbon nanotilaments (CNFs) could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and$H_2$ as source gases under thermal chemical vapor deposition system. By the incorporation of $SF_6$ as a cyclic modulation manner, the geometries of carbon coils-related materials, such as nano-sized coil and wave-like nano-sized coil could be observed on the substrate. The characteristics (formation density and morphology) of as-grown CNFs with or without $SF_6$ incorporation were investigated. Diameter size reduction for the individual CNFs-related shape and the enhancement of the formation density of CNFs-related material could be achieved by the incorporation of $SF_6$ as a cyclic modulation manner. The cause for these results was discussed in association with the slightly increased etching ability by $SF_6$ addition and the sulfur role in SF 6 for the geometry change.

• Journal of the Korea Convergence Society
• /
• v.12 no.7
• /
• pp.235-241
• /
• 2021

Appearance management through hair beauty forms the basis of the beauty industry, while permanent waves using heat are often used in hair salons, but hair damage due to thermal permanent wave treatment is an inevitable reality. Therefore, this study was conducted for the purpose of presenting an efficient method for thermal permanent wave that can further increase hair wave formation ability and minimize customer's hair damage. After collecting virgin hair from the occipital region, thermal rod pretreatment and thermal permanent wave treatment were performed, and hair roughness analysis and 3D-image were studied using an Atomic Force Microscope. As a result of the study, both the average roughness (Ra) and the ten point average roughness (Rz) were calculated as 223 nm and 853 nm for 4 sections, respectively, showing the highest values. Although the number of samples of the experimental data is limited, the wave forming power can be further increased through this study, and it is expected that it will be practically possible to propose an objective method for thermal permanent wave that can minimize hair damage as well as protect the cuticle of the customer's hair.Judge.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.198-198
• /
• 2011

The numerical simulation of dam break problem suffers from several challenges in terms of accuracy, stability, and versatility of the simulation algorithm since the water flow is generally discontinuous and presents abrupt variations. Thus, to obtain stable and accurate solutions, flow models for this purpose require numerical schemes provided with shock-capturing properties, and with the ability to work with flexible two-dimensional meshes. In this context, SU/PG method(Hughes and Brooks, 1979) is excellent candidate for the solution of the dam break problem. The weak formulation of the equations and the discontinuous polynomial basis lead to an accurate representation of bore waves(shocks). Furthermore, the discretization of the domain in finite elements is extremely effective in modeling complex geometries. In this study, a finite element model based on the SU/PG scheme is developed to solve shallow water equations and the model is applied to dam break problem. It is found that the present model accurately captures the bore wave that propagates downstream while spreading laterally and the depression wave that moves upstream. Furthermore, the propagation and formation of water surface profile compared favorably with those obtained by the previously published results.

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.435-445
• /
• 2000

The purpose of this study was to compare the leakage of four different obturation techniques in conjunction with immediate apical barrier of ${\beta}$-tricalcium phosphate(TCP) in teeth with open apex. Eighty single-rooted human premolar teeth were prepared and sectioned horizontally, so maximum diameter in apex was 4mm. Apical defects that were similar to open apex, were created with #1/2 round bur and SF104R bur. The apical foramen were opened to a size 80 file extended 3mm beyond the apex. The teeth were placed into the oasis block soaked saline to simulate periapical tissue often associated with pulpless teeth and received apical barriers consisting of TCP followed by obturation using lateral condensation technique, vertical condensation technique, continuous wave technique and thermoplasticized gutta-percha injection technique. Two unobturated teeth served as positive and negative controls. Teeth were immersed in resorcinol-formaldehyde resin for S days at $4^{\circ}C$, and the resin was allowed to polymerize completely for 4 days at room temperature. Teeth were then sectioned horizontally at 1.5mm(level 1), 2.5mm(level 2) and 3.5mm(level 3) from the apex, and examined under a stereomicroscope at ${\times}40$ magnification. The photographs were taken at ${\times}40$ magnification of the filling in each level and scanned. The leakage length in tooth/resin interface was measured at each of the three levels. Each ratio of leakage was obtained by calculating the ratio of the leakage length of canal wall infiltrated with resin to the total length of the canal and was analyzed statistically(One-way ANOVA and Scheffe test). The result were as follows : 1. At the level 1, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), but there was statistically significant(p<0.05). 2. At the level 2, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), and the most leakage in the continuous wave technique group(group 3). There was statistically significant difference between the thermoplasticized gutta-percha injection technique group and the continuous wave technique group(p<0.05). 3. At the level 3, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), but there were no statistically significant differences between other groups(p>0.05). These results suggest that thermoplasticized gutta-percha injection technique which had 1mm apical gutta-percha matrix after the formation of TCP apical barrier, can demonstrate favorable apical sealing.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.281-283
• /
• 2001

As a companion to an adiabatic version developed by Ryu and his coworkers, we have built an isothermal magnetohydrodynamic code for astrophysical flows. It is suited for the dynamical simulations of flows where cooling timescale is much shorter than dynamical timescale, as well as for turbulence and dynamo simulations in which detailed energetics are unimportant. Since a simple isothermal equation of state substitutes the energy conservation equation, the numerical schemes for isothermal flows are simpler (no contact discontinuity) than those for adiabatic flows and the resulting code is faster. Tests for shock tubes and Alfven wave decay have shown that our isothermal code has not only a good shock capturing ability, but also numerical dissipation smaller than its adiabatic analogue. As a real astrophysical application of the code, we have simulated the nonlinear three-dimensional evolution of the Parker instability. A factor of two enhancement in vertical column density has been achieved at most, and the main structures formed are sheet-like and aligned with the mean field direction. We conclude that the Parker instability alone is not a viable formation mechanism of the giant molecular clouds.

• Carbon letters
• /
• v.23
• /
• pp.38-47
• /
• 2017

In this study, magnetite ($Fe_3O_4$) nanoparticles were electrochemically synthesized in an aqueous electrolyte at a given potential of -1.3 V for 180 s. Scanning electron microscopy revealed that dendrite-like $Fe_3O_4$ nanoparticles with a mean size of < 80 nm were electrodeposited on a glassy carbon electrode (GCE). The $Fe_3O_4/GCE$ was utilized for sensing chloramphenicol (CAP) by cyclic voltammetry and square wave voltammetry. A reduction peak of CAP at the $Fe_3O_4/GCE$ was observed at 0.62 V, whereas the uncoated GCE exhibited a very small response compared to that of the $Fe_3O_4/GCE$. The electrocatalytic ability of $Fe_3O_4$ was mainly attributed to the formation of Fe(VI) during the anodic scan, and its reduction to Fe(III) on the cathodic scan facilitated the sensing of CAP. The effects of pH and scan rate were measured to determine the optimum conditions at which the $Fe_3O_4/GCE$ exhibited the highest sensitivity with a lower detection limit. The reduction current for CAP was proportional to its concentration under optimized conditions in a range of $0.09-47{\mu}M$ with a correlation coefficient of 0.9919 and a limit of detection of $0.09{\mu}M$ (S/N=3). Moreover, the fabricated sensor exhibited anti-interference ability towards 4-nitrophenol, thiamphenicol, and 4-nitrobenzamide. The developed electrochemical sensor is a cost effective, reliable, and straightforward approach for the electrochemical determination of CAP in real time applications.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.20 no.3
• /
• pp.37-59
• /
• 2024

The current application of Generative AI in education requires enhancing skills and competencies for both instructors and students in the Age of Digital Formation. The knowledge, skills, and attitudes necessary for individualized education should be cultivated in schools, along with the ability to develop AI-compatible learning resources. Today's educational environment aligns with the demands of the Generative AI Era. Consequently, there is a need for an educational system that promotes critical thinking and creativity while connecting students to the global context. This study examined the teaching and learning processes, along with educational exploration, to understand the properties of light particles and waves within a competency-based science curriculum. The analysis and research findings aimed at devising a competency-based teaching-learning method for students' understanding of light particles and waves are as follows: First, unit analysis confirmed the significance of competency-oriented education and facilitated the structuring of units on light and waves. Second, qualitative content analysis outlined the procedures for applying conceptual knowledge and functions in experiential learning, as well as the process of feedback delivery. Third, the study highlighted the need for a meticulous approach to inducing problem recognition through inquiry and discussion activities, ensuring that students, when exploring and recognizing problems independently, do not develop misconceptions.