• 펄프종이기술
• /
• 제39권2호
• /
• pp.25-30
• /
• 2007

Recently the use of web offset printing has been increasing, which can provide high print speed, mass production, and high print quality. However, high speed web offset printing has frequently undergone a blistering problem when the printed paper passes through hot air dryers. Blistering occurs in the middle of the base paper or in the coating layer. This paper focused on the blistering occurring in the base paper. In order to elucidate the effect of pigment ratio on blistering, 6 types of coating color were prepared with varying GCC/clay ratios and printability and blistering were investigated focusing on structure changes in the coating layer. When the clay content in the coating layer was increased, surface roughness and surface strength were decreased and paper gloss was increased. In addition, it was found that the coating layer structure with high clay content, which contains lots of discontinuous pores, hindered water vapors to penetrate out and, as a result, blistering occurred.

• 한국의류학회지
• /
• 제25권2호
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.

• 한국환경교육학회지:환경교육
• /
• 제19권3호
• /
• pp.20-39
• /
• 2006

The purpose of the study is to develop e-Learning contents of environmental education for middle school students. The contents were developed based on literature review, the analysis of domestic and foreign programs and e-Learning contents on environmental education and expert advice. There are five main characteristics. First, this program has 12 sessions and is divided into six parts: introduction, air, water, animals and plants, soil, and resources and energy. Second, the contents were developed with consideration of middle school students' consist of optimized for learners by analyzing the needs of middle school students. Third, each part consists of five steps: "open", "unfold", "foster", "strengthen & refine", and "addition." Fourth, the contents have been developed in line with SCORM, an international standard for distnt education, to ensure reusability, accessibility, interoperability, and durability. Fifth, the contents are developed for blending online and off-line education. Developed program evaluated by 8 environmental education experts according to 10 evaluation item of total contents and contents development structure. In result, it evaluated comparatively high score.

• 한국식품영양과학회지
• /
• 제30권6호
• /
• pp.1108-1114
• /
• 2001

호박을 이용한 반고형 이유식을 제조하기 위하여 단호박과 늙은호박을 각각 마쇄하거나, 찌거나, 데친 후 각각을 체에 내리고 가열하여 puree를 만들고, 이들의 수분함량, 점도, 색도, $\beta$-carotene 함량, riboflavin 함량, ascorbic acid 함량을 측정하고, 관능검사를 실시하였다. 단호박퓨레가 호박퓨레보다 수분 함량이 적었고, 점도, Hunter L, a, b 색도, $\beta$-carotene 함량, riboflavin 함량은 높았다. 관능검사를 실시하여 단맛과 전체적인 선호도가 높은 찐 단호박 퓨레를 이유식의 주원료로 선택하였다. 변성전분의 혼합비율이 증가할수록 호화개시온도는 낮아지고 최고점도는 증가하였다. 찐 단호박 퓨레에 변성전분, 쌀가루, 유제품을 혼합하여 제조한 이유식은 살균과정에서 색도의 변화는 적었으나 점도가 증가하였는데 변성전분 3%를 혼합한 이유식은 점도가 안정하였다. 전체적인 선호도가 찐 단호박퓨레 40%, 쌀가루 7%와 전지분유 3%, 물 50%를 혼합한 단호박 이유식이 가장 높았다.

• 청정기술
• /
• 제2권2호
• /
• pp.100-125
• /
• 1996

After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.77-85
• /
• 1987

Hardened cement paste is mainly affected by corrosion of sulphate and chlorine ions in sea water. In this investigation, many specimens were made with the cement clinker minerals such as C3S, C3A, C4AF and their mixture according to cement composition added various blending materials. After the specimens were immersed in 4% MgSO4 and MgCl2 solutions, the product of reaction, the microstructure of specimen and Ca+2 ion leached in the solution were studied. The formation of Ca(OH)2 in the specimen of C3S is reduced relatively by adding pozzolanic admixtures. The chlorine ion is easily diffuse into the C3S specimen and produced CaCl2 compound, and it makes the specimen porous by leaching out itself into the solution. The specimen of C3A, C4AF are broken down by expanding reaction of ettringite and gypsum compound produced in the MgSO4 solution. At a later period, the ettringite is transformed into gypsum and 5MgO.2Al2O3·15H2O. The C3A in the MgCl2 solution combines chlorine ion to form Friedel's salt and prevents the diffusion reaction of chlorine ion into the specimen. Granulated slag shows inferior effect on the resistance of the specimen in MgSO4 solution by forming ettringite and gypsum, but good result in MgCl2 solution. Pozzolanic materials, on the whole, offer noticable effect on the resistance of the specimen in both solutions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.75-81
• /
• 2010

본 연구에서는 콘크리트 배합과 혼화재 첨가에 의한 콘크리트 물성 변화가 매립 철근의 부식을 평가하는 전기-화학적 기법에 미치는 영향을 확인하고 그 원인을 분석하였다. 연구 결과 자연전위법은 철근의 부식면적이 10% 이하일 경우 콘크리트 내부 물성에 영향을 받는 것으로 나타났으며, 혼화재가 혼입된 경우에는 높은 부식상태의 철근에 대한 정성적인 부식평가가 가능하였다. 또한 분극저항법은 부식량이 10% 이하로 미미한 경우에도 콘크리트 물성의 영향을 받지 않았으나, 혼화재가 혼입된 경우에는 비슷한 철근부식면적의 OPC보다 부식정도를 과소평가하는 것으로 나타났다.

• 한국건축시공학회지
• /
• 제10권2호
• /
• pp.59-66
• /
• 2010

본 연구에서는 흡착 및 내열, 내화성이 우수한 카본블랙을 이용하여, 콘크리트의 제반성능을 파악하여, 콘크리트용 혼화재료로써 활용가능성 여부를 판단하고자 함이 본 연구의 목적이다. 실험결과 굳지 않은 콘크리트에서는 흡수율 및 미립분의 카본블랙의 충전효과로 인하여 슬럼프증가 및 공기량 감소를 나타내었으며, 블리딩, 관입저항에 의한 응결시간은 양호한 결과로 나타났다. 또한 경화콘크리트의 강도 특성에는 Plain보다 높은 강도를 나타내었으며, 포졸란 반응에 의해 장기강도로 갈수록 강도발현이 높게 나타났다. 또한 약 $850^{\circ}C$내외의 가열 후의 압축강도에서 치환율이 증가할수록 내화, 내열성이 높게 나타났으며, 건조수축 역시 양호하게 나타났고, CO, $CO_2$, 포름알데히드의 환경성 평가도 Plain보다 양호한 결과로 나타났다. 이상 결과를 종합하면, 고강도의 배합설계를 고려한 적절한 AE감수제를 사용할 경우 카본블랙이 콘크리트용 혼화재로써 사용이 가능할 것으로 판단된다.

• Macromolecular Research
• /
• 제16권6호
• /
• pp.549-554
• /
• 2008

Proton conducting crosslinked membranes were prepared using polymer blends of polystyrene-b-poly(hydroxyethyl acrylate)-b-poly(styrene sulfonic acid) (PS-b-PHEA-b-PSSA) and poly(vinyl alcohol) (PVA). PS-b-PHEA-b-PSSA triblock copolymer at 28:21:51 wt% was synthesized sequentially using atom transfer radical polymerization (ATRP). FT-IR spectroscopy showed that after thermal ($120^{\circ}C$, 2 h) and chemical (sulfosuccinic acid, SA) treatments of the membranes, the middle PHEA block of the triblock copolymer was crosslinked with PVA through an esterification reaction between the -OH group of the membrane and the -COOH group of SA. The ion exchange capacity (IEC) decreased from 1.56 to 0.61 meq/g with increasing amount of PVA. Therefore, the proton conductivity at room temperature decreased from 0.044 to 0.018 S/cm. However, the introduction of PVA resulted in a decrease in water uptake from 87.0 to 44.3%, providing good mechanical properties applicable to the membrane electrode assembly (MEA) of fuel cells. Transmission electron microscopy (TEM) showed that the membrane was microphase-separated with a nanometer range with good connectivity of the $SO_3H$ ionic aggregates. The power density of a single $H_2/O_2$ fuel cell system using the membrane with 50 wt% PVA was $230\;mW/cm^2$ at $70^{\circ}C$ with a relative humidity of 100%. Thermogravimetric analysis (TGA) also showed a decrease in the thermal stability of the membranes with increasing PVA concentration.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.658-666
• /
• 2021

A novel flame retardant and antibacterial composite membrane coating for wood surfaces was prepared by adding POSS-based phosphorous nitrogen flame retardant (later referred to as NH₂-POSS) and silver nanoparticles (Ag NPs) to chitosan (CS). The effects of NH₂-POSS content (mass fractions of CS 0%, 0.5%, 1%, 3%, 5%, and 7%) on the structure and properties of the composite membrane coating on wood were investigated. The composite film was prepared by the method of blending and ducting. Contact angle, tensile property and antibacterial effects of the composite film were measured, and infrared spectroscopy was used. The results show that the addition of NH₂-POSS can not only improve the toughness of the membrane, but also the flame retardancy of the membrane, which improves the application of the membrane in wood products. However, with the addition of NH₂-POSS, the transparency of the composite membrane was weakened. The inhibitory effect of the composite membrane on the growth of Escherichia coli was enhanced with the increase in Ag NPs. This research provides a foundation for the application of functional wood.