• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.468-473
• /
• 2004

The objective of this paper is to analyze the characteristics of wave transmission through various junctions in coupled beams. The in-plane vibration as veil as the out-of-plane vibration are generated due to the wave conversion at the junctions in the coupled beams. The out-of-plane vibration is associated with propagation of out-of-plane waves (flexural waves). The in-plane vibration is associated with propagation of in-plane waves (longitudinal and torsional waves). In order to effectively reduce vibration and structure-borne noise, it is necessary to understand the characteristics of wave conversion at various junctions in the coupled structures. The numerical results in this paper have showed the characteristics of wave transmission through various junctions in coupled beams. Those could be helpful to designer to develop the idea to reduce vibration and structure-borne noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.391-395
• /
• 1997

The transmission of sound and vibration through structures is of interest in many noise control problems, including architectural acoustics, sound transmission through air craft, spacecraft and ship, and the transmission of noise through machinery and engine enclosures. Statistical Energy Analysis provides a simple and accurate method of approaching these problems. In this paper, comparing the measured coupling loss factor of plate-beam with measured coupling loss factor of mass on the junction will be inspected.

• Structural Engineering and Mechanics
• /
• 제82권5호
• /
• pp.571-585
• /
• 2022

As a vital component of power grids, long-span transmission tower-line systems are vulnerable to wind load excitation due to their high flexibility and low structural damping. Therefore, it is essential to reduce wind-induced responses of tower-line coupling systems to ensure their safe and reliable operation. To this end, a shape memory alloy-bidirectional tuned mass damper (SMA-BTMD) is proposed in this study to reduce wind-induced vibrations of long-span transmission tower-line systems. A 1220 m Songhua River long-span transmission system is selected as the primary structure and modeled using ANSYS software. The vibration suppression performance of an optimized SMA-BTMD attached to the transmission tower is evaluated and compared with the effects of a conventional bidirectional tuned mass damper. Furthermore, the impacts of frequency ratios and SMA composition on the vibration reduction performance of the SMA-BTMD are evaluated. The results show that the SMA-BTMD provides superior vibration control of the long-span transmission tower-line system. In addition, changes in frequency ratios and SMA composition have a substantial impact on the vibration suppression effects of the SMA-BTMD. This research can provide a reference for the practical engineering application of the SMA-BTMD developed in this study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.150-155
• /
• 2008

Dynamic characteristics of a wrist power transmission examine closely with mass property, to present a model which is able to induce the vibration is ultimately the purpose. A robot wrist power transmission for analysis model gets the mass property through the approach to be the experimental. A bearing equivalent stiffness which supports the axis and a gear contact equivalent stiffness are determined by the simplicity analysis model compared the result of the experiment. We calculate the vibration tendency of the robot wrist power transmission by an analysis tool which is called the RecurDyn. We compared it with a signal analysis experiment's which a robot operation happens which is based on the ambient noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.344-350
• /
• 2009

According to torsional vibration characteristic of a damper clutch in auto-transmission, the input shaft system have occurred breakdown for the duration cycle and over-vibration happened on vehicle at specific condition. This paper describes the improvement of the torsional vibration of input shaft and the vehicle vibration by tuning of the damper clutch and suggests to the guide line about torsion characteristic on the design of damper clutch.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.246-255
• /
• 1993

The paper presents the experimental studies on the effectiveness of some vibration isolators developed for reducing transmission of vibration from the powered knapsack sprayer to the back and shoulders of the operator. A test rig was used to conduct detailed experimental studies on the powered knapsack sprayer mounted on it and fitted with different vibration isolators. Structural features of vibration isolators have been presented and their effectiveness of isolating transmission of vibration, from the engine-blower of the sprayer to its main frame and the operator, has been presented and discussed. Vibration measurements and analyses made by using B & K equipment have proved that the vibration isolators are quite effective in reducing the vibration transmission. The operators felt much less discomfort when they used the sprayer fitted with the isolators developed for the purposes, as compared to the existing arrangement.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.883-890
• /
• 2010

According to torsional vibration characteristic of a tunable dual stiffness type clutch(TDSTC) in auto-transmission, the input shaft system have occurred breakdown for the duration cycle and over-vibration happened on vehicle at specific condition. This paper introduces the improvement of the torsional vibration of input shaft and the vehicle vibration by tuning of the TDSTC.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1395-1403
• /
• 2002

The characteristics of gear meshing vibration undesgo change as the vibration is transmitted from the gear to the housing. Therefore, vibration transmission characteristics of helical gear systems must be understood before the effective methods of reducing gear noise can be found. In this work, using a helical gear with different lead errors, the gear vibration in the rotational direction and the bearing vibration are measured. The frequency characteristics of gear and bearing vibration are investigated and a comparson is also provided.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.692-700
• /
• 2012

진동 인텐시티는 진동시스템의 원인을 찾는데 사용되어 왔다. 그 뿐만 아니라, 균열의 확인과 보강재 설치와 같은 구조물의 진단에 사용되어 왔다. 진동원의 위치를 명확하게 파악하고 에너지 전달경로의 변화를 이해하기 위해, 유동 가시화가 필요하다. 이전 연구의 대부분은 진동에너지의 크기와 방향, 전달경로를 가리키는 벡터를 사용하였다. 그러나, 판과 같은 구조물의 넓은 면적으로 인해 벡터 가시화를 사용하여 명확한 전달경로를 알아낼 수 없었다. 이것은 전체 판 표면에 대한 상세한 벡터 흐름이 필요한 경우에 문제가 된다. 이 연구에서는 명확하게 모든 판 표면의 파워 흐름 전달경로를 표시하기 위해 유선 가시화가 사용되었다. 유선 가시화를 사용함으로써, 분명한 전달 경로를 얻을 수 있을 뿐만 아니라 보강판의 에너지 흐름 변화를 이해하는데 도움이 되어 벡터 가시화를 향상시킬 수 있다. 우선 진동 인텐시티 계산의 검증을 위해 이전 연구와 비교를 한다. 명확하게 파워 흐름 전달경로를 표시하기 위해 유선표현을 사용하였다. 이 표현법은 보강판의 분명하지 않은 벡터 방향을 보완해 준다. 보강판과 보강되지 않은 판의 에너지 전달경로의 패턴 차이를 유선 표현법을 사용하여 확인할 수 있다. 복잡한 유선 패턴은 벡터표현으로 분명하지 않은 높은 공진주파수에서 확인할 수 있다.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.777-783
• /
• 2012

진동 인텐시티는 진동시스템에서 진동원의 위치를 찾는데 사용되어 왔다. 벡터 표현법 사용에 의해 파워흐름의 원인과 진동에너지 전달경로가 밝혀질 수 있다. 그러나, 판과 같은 구조물의 넓은 면적으로 인해 벡터 가시화를 사용하여 명확한 전달경로를 알아낼 수 없었다. 실험적으로 큰 면적의 물체에서는 측정점의 수가 늘어나게 된다. 이것은 측정에 많은 시간이 요구된다. 이번 연구에서는 FEM과 실험에 의한 모든 면에서 파워흐름 전달경로를 분명하게 가리키기 위해 유선 표현법이 사용되었다. 진동 인텐시티 전달경로를 분명하게 향상시키기 위해 실험과 FEM으로부터의 유선 표현을 비교하였다. 또한 FEM과 실험의 개선된 전달경로 가시화를 기존의 벡터표현과 비교하였다. 이 유선 가시화는 큰 표면을 갖는 판과 같은 구조물에 대해 진동원과 상세한 에너지 전달경로를 확인하는데 유용하다. 그 뿐만 아니라, 이 가시화 방법은 실험과 FEM 해석에 대해 많은 측정점을 필요로 하지 않는다.