• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.48-61
• /
• 1996

In the hot strip mill, not only the chatter vibration of finishing stands has a great influence on the surface quality of hot products, but also that is the major factors to shorten the life of rolling mill housings or to create the machine troubles. As long as the mill has been operating, the low frequency chatter at the early mill stands (No.2 and No.3) of POSCO's Kwangyang No.2 hot strip mill had been detected when rolling certain types of products, e.g., thinner gage, hard grade products. For several years, the experimental study was undertaken to analyze the cause of the chatter vibration and establish the methods to avoid the vibration to acceptable levels. The analysis and solution to the vibration problem with recommendations and revised maintenance practice are the subjects of this article.

• Biomolecules & Therapeutics
• /
• 제10권1호
• /
• pp.1-6
• /
• 2002

The particle size of medicinal materials is an Important physical property that affects the phar-maceutical behaviors such as dissolution, chemical stability, and bioavailability of solid dosage forms. The size reduction of raw medicinal powder is needed to formulate insoluble drugs or slightly soluble medicines and to improve the pharmaceutical properties such as the solubility, the pharmaceutical mixing, and the dispersion. The objective of the present study is to evaluate physiological activity of amorphous and nano-particle prep-arations of insoluble drug, ursodeoxycholic acid (UDCA), which were made by three types of fine grinding mills. The change of physical properties of ground UDCA was conformed by Mastersiger microplus and X-ray diffraction. We have investigated hepatoprotective effects of the nano-particle preparations of UDCA by plan-etary mill, vibration rod mill and jet mill in $CCI_4$-induced oxidatively injured mouse liver. The results showed that nano-particle preparations of UDCA all decreased reactive oxygen sepecies generation and lipid peroxi-dation in $CCI_4$-induced oxidative stress mice. Among them, nano-particle preparations by vibration rod mill and jet mill showed more significantly hepatoprotective effects compared to intact UDCA and planetary mill-ground UDCA. These results suggest that ground UDCA with vibration rod mill and jet mill shows a high amorphous state and the improved dissolution.

• 소음진동
• /
• 제4권1호
• /
• pp.43-50
• /
• 1994

Chatter vibration of a rolling machine in steel plants has a significant effect on thickness quality of the products. The cause and mechanism of the mill chattering is addressed through measurement of vibration and dynamic torque. An FFT system and an FM telemetry system are employed to collect data at several locations of possible damages. The results reveal the followings as sources of the mill vibration. The first is defects in roller bearings of a work roll chock. The second is instability of an oil film bearing in a backup roll chock, which has been investigated with a theoretical model describing the phenomenon. Dynamic torque is not the direct cause of mill vibration but rather influenced by the vibration. Appropriate treatment methods are suggested to address each of the above sources.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.578-583
• /
• 2001

Chattering phenomenon is an abrupt relative vibration between the strip and rolls of rolling machine in working. It inevitably results from the progress of the degeneration in the mill facilities. This research was carried out in order to analyze the characteristic and find the cause of chatter mark in finishing mill and it was founded that major causes are facility character of driving part and special condition in case of excessive roll force.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.634-637
• /
• 2000

A diagnosis system that provides early warnings regarding machine malfunction is very important for rolling mill so as to avoid great losses resulting from unexpected shutdown of the production line. But it is very difficult to provide early warnings in rolling mill. Because dynamics of rolling mill is non-linear. This paper shows a chaotic behaviour of vibration signal in rolling mill using embedding method. Not only phase plane and Poincare map are implemented but also FFT and histogram of vibration signal in rolling mill is presented by embedding method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.374-377
• /
• 2001

회전체 베어링 상태진단에 신뢰성을 갖기 위하여 여러 가지 진단 방법이 연구되고 있으며, 이때 이용하는 변수는 온도와 소음, 진동 그리고 윤활유가 있으며 분석 방법으로는 온도추이분석, 소음분석, 진동분석, 윤활제 분석방법이 주로 이용되고 있다. 본 연구에서는 압연기 베어링의 상태진단의 변수로 베어링의 진동 신호를 선택하고 이 진동신호에서 비선형성이 강한 신호 즉 카오스적 거동이 있음을 타켄스의 매립법과 포엔카레 단면을 이용하여 확인하였다.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.759-765
• /
• 2000

생산라인의 예기치 않은 운전정지로부터 손실을 피하기 위한 기기의 조기 경보 체제인 고장 진단 시스템은 매우 중요하다. 베어링은 베어링 자체가 비선형이기 때문에 초기에 베어링의 이상 진단을 행한다는 것은 매우 어렵다. 본 연구에서는 압연기 베어링의 상태진단의 변수로 베어링의 진동 신호를 선택하고 이 진동신호에서 비선형성이 강한 신호 즉 카오스적 거동이 있음을 FFT, 타켄스의 매립법과 포엔카레 단면을 이용하여 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1854-1858
• /
• 2000

Chattering phenomenon is an abrupt relative vibration between the strip and rolls of rolling machine in working. It inevitably results from the progress of the degeneration in the mill facilities. This research was carried out in order to analyze the characteristic and find the cause of chatter mark in finishing mill and it was founded that one of major cause is appearance of dead zone at pinion stand in case of excessive roll force.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.32-39
• /
• 2009

This paper describes mathematical models of the torsional geared driving system for the indexing path and the mill driving path in a mill turret. The eigenvalue analysis for the models is conducted both with and without the gear contact stiffnesses. The natural frequency leads to the effect of gear contact stiffnesses on the vibration of torsional geared systems in a mill turret. It is necessary to analyze eigenvalues of the complex geared torsional system in order to prevent the unexpected vibrations.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.199-205
• /
• 2011

This paper proposes a framework to predict the mechanical fault of hot rolling mill system (HRMS). The optimum process of HRMS is usually identified by the rotating velocity of working roll. Therefore, observing the velocity of working roll is relevant to early know the HRMS condition. In this paper, we propose the framework which consists of two methods namely spectrum matrix which related to case-based fast Fourier transform(FFT) analysis, and three dimensional condition monitoring based on novel visualization. Validation of the proposed method has been conducted using vibration data acquired from HRMS by accelerometer sensors. The acquired data was also tested by developed software referred as hot rolling mill facility analysis module. The result is plausible and promising, and the developed software will be enhanced to be capable in prediction of remaining useful life of HRMS.