• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.17-24
• /
• 2007

This paper presents the design procedure of a vertical wind turbine named jet-wheel-turbo turbine and the numerical and experimental verifications. The design parameters such as the rotor inlet angle, the diameter-to-hub ratio, the inlet guide outlet angle and the solidity were optimized to maximize the energy transfer, and to further increase the turbine efficiency by applying the side guide vane and the side opening to the rotor. The maximum power coefficient of 0.59, which is much higher than the ever-designed three-bladed horizontal turbines, was experimentally obtained when the optimal inlet- and side-guide vanes were installed and both sides of the rotor were 80% opened. The maximum power coefficients occur at the tip speed ratio ranging between 0.6 and 0.7. This vertical-axis turbine model can be applied to the large-scale power generation system with the speed and torque control algorithm for the specified wind characteristics.

• 컴퓨터교육학회논문지
• /
• 제7권3호
• /
• pp.35-43
• /
• 2004

인터넷을 기반으로 독립적인 장치들이 참여하는 P2P 컴퓨팅은 원하는 목적을 달성하는데 있어서 참여 장치들의 이탈, 고장, 네트워크 상태, 익명성 등으로 인해 잦은 접속단절과 보안 공격을 겪는다. 여러 연구와 구현에서 이러한 문제들을 해결하기 위해 공유되는 자원의 중복 기법을 사용한다. 이 논문에서는 컴퓨팅 자원의 공유를 목적으로 하는 P2P 컴퓨팅에서 수행되는 작업의 중복 수행을 통해 접속단절과 보안 공격에도 올바른 결과를 얻어내는 정확성 검증 기법을 제안한다. 제안하는 기법에서는 종속성이 존재하는 단위작업들에 대해 시스템 전체의 전역적인 메시지 교환 없이 주기적으로 정확성을 검증하고, 검증된 결과는 검사점이 되어 복귀 회복이 가능한 결함 포용이 가능하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.33-40
• /
• 2005

Impact-echo test, a kind of simple and economical method to evaluate the integrity of drilled piles has some limitations to use because the stress wave can be generated only on the head of a pile and the wave propagation in the pile with surrounding soils are very complicated. Numerical analyses and model tests in the laboratory have shown that both the ratio of length to diameter of a pile and the stiffness ratio of pile to soil have influence on the resolution of testing results. Full scale testing piles which have artificial defects were used to verify the capability of impact-echo technique as a tool for the pile integrity evaluation. Behaviour of the reflected signal of stress wave was investigated according to the type of defects. Elastic modulus of the pile was calculated using the wave velocity in the pile and the unconfined strength of concrete specimen. Influences of the stiffness difference between the pile and the ground on the characteristics of a wave signal were also examined.

• 한국세라믹학회지
• /
• 제44권10호
• /
• pp.542-547
• /
• 2007

We have determined an optimal reduction condition for NiO-based anode in single chamber solid oxide fuel cells that involve samaria-doped ceria (SDC) as an electrolyte. Optimal condition should not only induce sufficient reduction of NiO to Ni, but also prevent the reduction of SDC electrolyte in order to achieve high open circuit voltage (OCV) and power output. Thermodynamic consideration allowed us to determine the optimal anode reduction condition as $96%H_2-4%H_2O$ atmosphere at $250^{\circ}C$. This finding was in a good agreement with the experimental verifications by monitoring the conductivities of SDC and NiO under different reducing conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.205-210
• /
• 1992

The power flow calculations are the most important and powerful tools in the various studies of power system engineering. Newton-Raphson method, among the various power flow calculation techniques, is normally used due to its rapidness of numerical convergency. In the conventional Newton-Raphson method, however, there are some unrealistic assumptions, in which all the system power losses are considered to be supplied by the slack bus generator. Introducing the system power loss formula and augmenting the conventional Newton-Raphson power flow method, we can relieve the unrealistic assumption and improve the performance of power flow calculation. In this study, A new approach for handling the losses and augmenting the conventional power flow problem is proposed. The proposed method estimates the increamental changes of active power on each generation bus with respect to the change of total system power losses and the estimated value are used to update the slack bus power. If some studies for more theoritical investigations and verifications are followed, the proposed approach will show some improvement of the conventional method and give lots of contribution to increase the performance of power flow techniques in power systems engineering.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.219-229
• /
• 2017

Outlier detection is an imperative task to identify the occurrence of abnormal events before the structures are suffered from sudden failure during their service lives. This paper proposes a two-phase method for the outlier detection of Global Positioning System (GPS) monitoring data. Prompt judgment of the occurrence of abnormal data is firstly carried out by use of the relational analysis as the relationship among the data obtained from the adjacent locations following a certain rule. Then, a negative selection algorithm (NSA) is adopted for further accurate localization of the abnormal data. To reduce the computation cost in the NSA, an improved scheme by integrating the adjustable radius into the training stage is designed and implemented. Numerical simulations and experimental verifications demonstrate that the proposed method is encouraging compared with the original method in the aspects of efficiency and reliability. This method is only based on the monitoring data without the requirement of the engineer expertise on the structural operational characteristics, which can be easily embedded in a software system for the continuous and reliable monitoring of civil infrastructure.

• 대한전자공학회논문지SD
• /
• 제47권9호
• /
• pp.24-29
• /
• 2010

본 논문에서는 30 nm 채널 길이와 5 nm의 채널 반지름을 갖는 실리콘 기반의 나노와이어 MOSFET의 고주파 모델링을 다루고 있다. 3차원 소자 시뮬레이션을 이용하여 실리콘 나노와이어 MOSFET의 Y-parameter와 Z-parameter를 100 GHz까지 확보하였으며 이를 이용하여 모델 파라미터에 필요한 수식을 구하였다. 모델과 파라미터 추출 수식을 이용하여 회로 검증용 tool인 HSPICE에 의하여 검증이 이루어졌으며 quasi-static 기반의 고주파 모델이 100 GHz의 높은 주파수까지도 소자의 특성을 정확히 예측함을 확인하였다. 모델 검증은 MOSFET의 포화 영역 ($V_{gs}$ = $_{ds}$ = 1 V)과 선형 영역 ($V_{gs}$ = 1 V, $V_{ds}$ = 0.5 V)의 바이어스 조건에서 이루어졌으며 두 바이어스 조건에서의 Y-parameter에 대한 모델의 오차는 약 1 %로 매우 작은 값을 보여 준다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.299-303
• /
• 2001

In this paper, we introduce the Partial Half-Through Type Plate Girder Bridge proposed by Hyundai Development Co. and KRTC Consortium in Turn-Key Based design last year, and this type of bridge may be adapted to the railway bridge under similar conditions. This bridge across the North Han River was to be concerned its find view and the protection of water source. For its location is inside the dam, it required the long span and the clearance for the flood also. Its new composite section was able to diminish the deflection and vibration. Its shop-fabrication could control its quality easily, and might to be launched. This structural type have satisfied its functions, construction situations, and overall safeties, so this is the field-oriented type. However the composition and connections of the proposed members are different to the recent forms, and difficult to be applied to present specifications. Therefore it requires a certification on the application for more safety by not only analytical verifications but also experimental studies. Nevertheless, this type of bridge may have some more applications from now on.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권2호
• /
• pp.22-31
• /
• 2004

A problem of task rescheduling using a coordinator in a structural decentralized control of supervisory control theory is formulated. we consider that the overall system is divided into a number of local systems. Using an example of a chemical batch reaction process, it has shown that after local supervisors have been established for a given task, a coordinator can be used to solve some rescheduling problems among local plants for new or modified tasks. The coordination system models the interactions of local plants, and is consisting of only the shared events of local plants, so simpler to synthesize. A coordinator is designed based on the specifications given for the coordination system. Under the 'structural' conditions developed in this paper, the combined concurrent actions of the coordinator with the existing local supervisors will achieve the rescheduling requirements. Again since the conditions are structural (not specification-dependent), once the coordination architecture has been established, it can be used for a number of different tasks without further verifications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.133-135
• /
• 2004

As a result of the recent advances in magnetic materials, the Magnetic Amplifier(Magamp) technique is one of the reliable and cost-effective postregulation method for multiple-output power supply. This is true for high-current postregulated output since at highter output current the efficiency of linear postregulation is unacceptably low, while the complexity of more efficient switch mode postregulator is associated with a significant cost. Magamp have some advantages of higher power density, simple control circuit, good regulation, high frequency and high performance. In this paper, Operation principle of proposed approach and a performance of magamp control circuit with TL431 is described. The comparative analysis of magamp circuit and buck regulator circuit with 20W load condition is conducted. Experimental verifications on multi-output flyback converter are conducted. Simulations and experimental results show that the proposed approach is efficiency and voltage regulation of the auxiliary output is excellent.