• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.3-5
• /
• 1995

For a linear induction motor(LIM), the constants of each phase are different due to the structure. In this paper, a vector control analysis method of a LIM taking into consideration its asymmetrical constants are proposed. And, in order to prove the propriety of proposed vector control method and to analyze the dynamic characteristics of LIM's vector control, FEM taking into account of movement and using stator tapped winding is used in the analysis region. So, It is confirmed that the proposed asymetrical constants vector control theory and simulation method of mixing with FEM is appropriate to dynamic characteristics analysis of LIM.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.320-328
• /
• 2016

The introduction of renewable energy sources into the AC grid can change and weaken the strength of the grid, which will in turn affect the stability and robustness of the doubly-fed induction generator (DFIG) wind farm. When integrated with weak grids, the DFIG wind turbine with vector power control often suffers from poor performance and robustness, while the DFIG wind turbine with synchronized control provides better stability. This paper investigates the critical short circuit ratios of DFIG wind turbine with vector power control and synchronized control, to analyze the stability boundary of the DFIG wind turbine. Frequency domain methods based on sensitivity and complementary sensitivity of transfer matrix are used to investigate the stability boundary conditions. The critical capacity of DFIG wind farm with conventional vector power control at a certain point of common coupling (PCC) is obtained and is further increased by employing synchronized control properly. The stability boundary is validated by electromagnetic transient simulation of an offshore wind farm connected to a real regional grid.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.444-449
• /
• 2003

This paper presents a vector control method for the parallel-connected motor drive system. In this paper new estimation scheme of rotor flux position is presented to reduce sensitivity due to load difference between the motors. To confirm the validity of the proposed control method, we compare a simulation result of the proposed control method with that of the conventional indirect vector control method. The simulation results show that the proposed control method is effective the step change in load torque.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.440-445
• /
• 2002

In this paper, traction system for urban transit maglev system is proposed. Using vector control strategy to control magnitude and frequency of output voltage transiently is general. But in case of traction system for railway vehicle, it is impossible that adapt vector control because there is one-pulse mode in a high speed region. So this paper proposes the control strategy using vector control in a low speed region and slip frequency control in a high speed region. And also proposes overmodulation method that makes to change in one-pulse mode softly. The performance of traction system will be verified by simulation results using ACSL.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.100-107
• /
• 2003

This study was to control magnetic field orientation-typed sensorless vector control by applying the theory of a rotor flux observer to drive an induction motor. This research suggested a new speed estimation method that estimates speed with the rotor flux obtained by using a flux observer and the variable of state current detected by a current sensor without a speed sensor. Because the speed estimation method is independent from the motor constants, it is not necessary to control the gain of the parameters and the algorithm is simple. In the findings of the study, the researcher was convinced of the control function and the possibility of realization in the simulation experiment of sensorless vector control system by using DSP(Digital Signal Prosessor).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.853-855
• /
• 1999

The induction machine has been used frequently for the system that needs static speed because of its simplicity, durability, credibility and efficiency. But it is nonlinear system for its multi-variable interference. Its controller is more complicated than DC machine's one. So vector control method is needed for its high Performance control. This paper shows that vector control algorithm could be more fast and stable by using Genetic algorithm (GA) based upon Darwin's evolution theory and Mendel's genetics. Methods proposed in here are used to design induction machine's vector controller and to use GA for optimizing the controller's parameter. SIMULINK of MATLAB is used for analysis and conviction of control property

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.817-825
• /
• 2018

In this paper, a current hysteresis control with good decoupling properties for doubly-fed brushless induction machines (BDFIMs) has been proposed based on a generalized vector model. The independent control of the reactive power and speed for BDFIMs has been achieved by controlling the d-axis and the q-axis current of the control windings (CW). The proposed vector control method has been developed for the power winding (PW) flux frame. Experimental verification of a type Y180M-4 BDFIM prototype with 1/4 pole-pairs has been presented. Evidence of its good performance has been shown through experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.49-51
• /
• 1994

LIM has been developed for use in the industry, transportation, OA, FA because of the merits of direct drive and simple structure. The thrust control of LIM usually has been the average thrust control. However, vector control is required to control the instantaneous thrust force for an accurate positioning and speed control. To obtain dynamic vector control characteristics, it is important to make equivalent circuits which represent exactly LIM In this paper, asymmetrical d-q equivalent circuits is built [1] and vector control characteristics is calculated by simulation using these circuits.

• 한국전자통신학회논문지
• /
• 제8권4호
• /
• pp.583-588
• /
• 2013

본 논문에서는 로봇에서 다축 모션 제어를 쉽게 할 수 있는 AC 서보 드라이버의 성능 검증을 위하여 벡터 전류 제어 구현 기법을 제안한다. 이를 위해 먼저 PMSM을 구동을 위한 드라이버를 개발한 후 이 드라이버가 정상적으로 동작하는지를 벡터 전류로 확인하였다. 벡터 제어는 무부하에서 전류 벡터 제어를 실행하여 지령 전류에 따른 추종 전류를 비교하였다. 검증 결과 만족할 만한 결과를 얻었음을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.610-613
• /
• 1995

In addition to propulsive force to a flying vehicle, a rocket propulsion system can provide moments ro rotatate the flying vehicle and thus provide control of the vehicle's attitude and flight path. By controlling the direction of the thrust vectors, it is possible to control a vehicle's pitch, yaw, and roll motions. In this paper, we will introduce general thrust vector control mechanisms.