• 제목/요약/키워드: vector modulator

검색결과 45건 처리시간 0.049초

Photonic Generation of Frequency-tripling Vector Signal Based on Balanced Detection without Precoding or Optical Filter

  • Qu, Kun;Zhao, Shanghong;Li, Xuan;Zhu, Zihang;Tan, Qinggui
    • Current Optics and Photonics
    • /
    • 제2권2호
    • /
    • pp.134-139
    • /
    • 2018
  • A novel approach for frequency-tripling vector signal generation via balanced detection without precoding and optical filter is proposed. The scheme is mainly utilizing an integrated dual-polarization quadrature phase shift keying (DPQPSK) modulator. In the DPQPSK modulator, one QPSK modulator is driven by an RF signal to generate high-order optical sidebands, while the other QPSK modulator is modulated by I/Q data streams to produce baseband vector signal as an optical carrier. After that, a frequency-tripling 16-quadrature-amplitude-modulation (16QAM) vector millimeter-wave (mm-wave) signal can be obtained by balanced detection. The proposed scheme can reduce the complexity of transmitter digital signal processing. The results show that, a 4 Gbaud baseband 16QAM vector signal can be generated at 30 GHz by frequency-tripling. After 10 km single-mode fiber (SMF) transmission, the constellation and eye diagrams of the generated vector signal perform well and a bit-error-rate (BER) below than 1e-3 can be achieved.

모바일 WiMax용 카르테시안 벡터 모듈레이터 전치왜곡기의 선형성 개선에 관한 연구 (A Study on Linearity Improvement of Cartesian Vector Modulator Predistorter for WiMax Applications)

  • 전상현;김지연;김종헌
    • 한국ITS학회 논문지
    • /
    • 제9권4호
    • /
    • pp.32-42
    • /
    • 2010
  • 본 논문에서는 카르테시안 벡터 모듈레이터 전치왜곡기의 선형성 개선을 극대화하기 위해서 전치왜곡기 설계시 고려해야할 파라미터들을 제시하였으며 비선형시작점 조정회로를 사용한 개선된 카르테시안 벡터 모듈레이터 진처왜곡기를 제안하였다. 전치왜곡기의 성능을 확인하기 위해서 2.5 GHz 대역 모바일 WiMax 1FA 신호를 입력으로 하는 15 W 전력 증폭기에 제안한 전치왜곡기를 적용하였다. 측정결과, -45.3 dBc의 ACLR을 얻었으며 기존의 다이오드를 사용한 전치왜곡기에 비해서 선형성 개선 구간이 넓어졌을 뿐만 아니라 기존의 전치왜곡기에 비해 약 4 dB 개선된 결과를 얻었다.

AGC 기능을 갖춘 IMT-2000용 IQ 벡터 모듈레이터 설계 (The Design of IQ Vector Modulator having AGC Function for IMT-2000)

  • 오인열;박종화;손광철;김태웅;전형준;나극환
    • 한국전자파학회논문지
    • /
    • 제14권6호
    • /
    • pp.575-583
    • /
    • 2003
  • 본 논문에서는 개방 단락 반사형 IQ 벡터 모듈레이터를 설계 제작하였다. 개방 단락 반사형은 구조의 특수성으로 인해 외부 회로의 첨가 없이 IQ 벡터 모듈레이터를 구현할 수 있다는 장점이 있다. 일반적으로 개방 및 단락의 반사구조로써 MESFET을 사용하여 구현되지만 이는 IQ 신호에 의해서 음 전압이 발생되어야 MESFET 를 동작시킬 수 있고, 이 때문에 IQ 신호에 대한 TTL 적용이 되어 동작케하기 위해서는 설계가 복잡해진다 반면 BJT특성의 구조적 변형으로 전자 이동도 특성이 향상된 HBT등의 소자가 등장하고 있고 높은 주파수에서도 문제없이 동작이 가능하도록 되었다. 이에 BJT 구조의 개방 단락 반사형 IQ 벡터 모듈레이터를 제안하고 제작하였으며, BJT 특성으로 인해 TTL 호환이 쉽다는 장점을 얻었다. 또한 AGC 기능을 갖도록 하기 위해 이득제어가 될 때 위상의 변화 없이 구현되도록 독립적으로 동작하는 가변 감쇠기를 적용하였다. 제작 결과 4사분면의 전체적으로 $\pm$ 1$^{\circ}$의 위상차와 $\pm$ 0.6 dB의 진폭 차를 가지고 동작하며, 20 dB 가변범위 전체적으로는 위상에 영향을 주지 않으며 이득을 가변시킬 수 있는 설계의 결과를 이루었다. 또한 온도 변화량에 대해서도 $\pm$ 6$^{\circ}$의 위상변화량과 $\pm$ 0.5 dB의 진폭 변화량만을 갖는 결과를 얻음으로써 온도 변화에 대한 특성도 만족함을 확인하였다.

적응 등화기를 이용한 Feedforward 선형증폭기에서의 등화기 차수 결정 (The Order Selection of Equalizer in Feedforward Power Amplifier Linearizer using Adaptive Equalizer)

  • 정지성;유경렬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.715-717
    • /
    • 1999
  • 본 논문에서는 feedforward 선형 증폭기에서의 지연 불일치에 의한 효과를 최소화하기 위한 등화기의 차수 결정에 관하여 수학적 접근과 모의실험을 하였다. 현재 feedforward 선형 증폭기에서 주로 사용하는 vector modulator는 지연 불일치에 확실한 개선을 이루지 못하고 있다. 이것을 극복하고자 vector modulator를 등화기로 대체하고 증폭기와 시지연선의 최대시간불일치와 sampling frequency와의 관계로 등화기의 차수를 결정하여 지연 불일치에 의한 오류 제거능력을 향상시켰다.

  • PDF

벡터 모듈레이터형 광대역 위상 변위기의 설계 및 제작 (Design and Fabrication of Broadband Phase Shifter Based on Vector Modulator)

  • 류정기;오승엽
    • 한국전자파학회논문지
    • /
    • 제14권7호
    • /
    • pp.734-740
    • /
    • 2003
  • 본 논문에서는 4개의 다이오드 감쇠기, 비대칭 커플드 라인 커플러, 대칭 커플드 라인 커플러 및 전력 합성기를 이용한 벡터 모듈레이터형 광대역 아날로그 위상변위기를 구현하였다. 가격, 회로의 크기 및 수동소자의 수에 그 장점이 있는 간단한 구조를 제안하였다. P-I-N 다이오드 감쇠기의 감쇠량에 따른 위상변화를 수식적으로 표현하여, 전체회로를 최적화하였다. 제작된 위상변위기는 1 GHz~3 GHz주파수 대역에서 360$^{\circ}$위상변화를 나타내며, $\pm$8.2$^{\circ}$의 최대 위상 오차 및 16$\pm$2.5 dB의 삽입 손실을 나타내었다.

Polar Transmitter with Differential DSM Phase and Digital PWM Envelope

  • Zhou, Bo;Liu, Shuli
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제14권3호
    • /
    • pp.313-321
    • /
    • 2014
  • A low-power low-cost polar transmitter for EDGE is designed in $0.18{\mu}m$ CMOS. A differential delta-sigma modulator (DSM) tunes a three-terminal voltage-controlled oscillator (VCO) to perform RF phase modulation, where the VCO tuning curve is digitally pre-compensated for high linearity and the carrier frequency is calibrated by a dual-mode low-power frequency-locked loop (FLL). A digital intermediate-frequency (IF) pulse-width5 modulator (PWM) drives a complementary power-switch followed by an LC filter to achieve envelope modulation with high efficiency. The proposed transmitter with 9mW power dissipation relaxes the time alignment between the phase and envelope modulations, and achieves an error vector magnitude (EVM) of 4% and phase noise of -123dBc/Hz at 400kHz offset frequency.

I/Q 벡터 모듈레이터를 이용한 GPS CRPA 패턴 제어기술 (A Technology on the GPS CRPA Pattern Control Using the I/Q Vector Modulator)

  • 김준오;배준성
    • 한국군사과학기술학회지
    • /
    • 제9권3호
    • /
    • pp.48-55
    • /
    • 2006
  • This paper describes the antenna based GPS anti-jamming technology called CRPA(Controlled Reception Pattern Antenna), which used $2{\times}2$ array elements. In this system, the main functions are the antenna complex weight control and the GPS digital I/Q VM(Vector Modulator). To update the VM's I/Q complex weights, the PC based DAC(Digital to Analog Converter) module was also used and the two analog output voltages were applied to the $2{\times}2$ array elements to synthesize the null pattern. In the study, we also simulated the $2{\times}2$ GPS array null patterns to compare the null depth with experimental results. The VM was also modified at the frequency of 1.575GHz for the GPS L1 and controlled by the PC based VM software.

Voltage Source Inverter Drive Using Error-compensated Pulse Width Modulation

  • Chen, Keng-Yuan;Hu, Jwu-Sheng;Lin, Jau-Nan
    • Journal of Power Electronics
    • /
    • 제16권1호
    • /
    • pp.388-397
    • /
    • 2016
  • An error-compensated pulse width modulator (ECPWM) is proposed to improve the baseband harmonic performance and the switching loss of voltage source inverters (VSIs). Selecting between harmonic distortion and switching loss is a design tradeoff in the conventional space vector pulse width modulation. In this work, an accumulated difference in produced and desired phase voltages is considered to adjust the reference signal. This mechanism can compensate for the voltage error in the previous carrier period. With error compensation every half-carrier period, the proposed ECPWM allows one-half reduction in carrier frequency without scarifying baseband harmonic distortion. The proposed modulator is applied to a three-phase VSI with R-L load and a motor-speed-control system for experiments. The measured efficiency and operating temperature of switches confirm the effectiveness of the proposed scheme.

직접 반송파 변조 시스템을 위한 IQ 변조기 설계 (A Design of IQ Modulator for Direct Carrier Modulation Systems)

  • 문태수;;정용채
    • 한국전자파학회논문지
    • /
    • 제22권9호
    • /
    • pp.847-851
    • /
    • 2011
  • 본 논문에서는 입력 신호의 진폭과 위상을 미세 조정할 수 있는 새로운 IQ 변조기를 제안하였다. 제안된 IQ 변조기는 저위상 편차 감쇠기, 분배기, 그리고 결합기로 구성되어 있다. 기존 감쇠기의 위상 편차 특성을 극복하기 위한 새로운 위상 보상 기술을 사용하였고, 이를 수식적으로 분석하였다. 제안하는 IQ 변조기를 통하여 완전한 $360^{\circ}$의 위상 조정과 동시에 입력 신호의 큰 진폭 조정이 가능하며, 극좌표계의 중심점을 지나는 선형적인 IQ신호 배열을 구현하였다.