• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.153-164
• /
• 2007

Nowaday, in Korea, many u-City projects have been developed as a core business in the new town development project by national or local level of government. However, the new business projects have some problems, such as excessive number of u-services, increased project funds and period, and lower u-services due to lack of u-service evaluation methodologies. Therefore, this paper proposes a new u-service evaluation methodology to solve current problems. The methodology gives an ability to guard general u-service groups for reaching the main goal of the u-City project, and then select alternative u-service groups against being limited by the law and technology in the project year. Besides, as a key variable on performing u-City plans, the complexity between stakeholders is considered in the methodology. Finally, through the Optimal Sequential Method in the methodology, the maximum value of u-service group is obtained as a optimal service group of u-City.

• Journal of the Korean Institute of Gas
• /
• v.4 no.4 s.12
• /
• pp.42-49
• /
• 2000

Due to their size and complexity, it is very difficult to make diagnostic system for the whole chemical processes. Therefore, a systematic approach is required to decompose larpge-scale process into sub-processes and then diagnose them. This paper suggests a method for the minimization of knowledge base and flexible diagnosis to be used in qualitative fault diagnosis based on Fault-Effect Tree model. The system can be decomposed for flexible diagnosis, size reduction of knowledge base, and consistent construction of complex knowledge base. The new node, gate-variable, is introduced to connect the cause-effect relationships of each sub-process. For on-line diagnosis, off-line analysis is performed to construct Fault-Effect Trees of gate-variables as well as activation conditions of gate-variables. On-line diagnosis strategy is modified to get the same diagnosis result without system decomposition. The proposed method is illustrated with a fault diagnosis system for a large-scale boiler plant.

• Journal of Family Resource Management and Policy Review
• /
• v.15 no.3
• /
• pp.131-151
• /
• 2011

This study attempted to estimate the level of perceived lack of time in Korean society, to link it to time management and to identify the possible association that accounts for time shortage. I employed the gender perspective in order to reveal the dynamics and complexity of the perception of a lack of time in the population. The sample for the study was drawn from the 1999 and 2009 Korean time diary data collected by the Korean National Statistical Office. From the original data, I selected a sample of second shift families(men and women who are presently working and raising children) living in metropolitan areas(including Seoul and six major urban areas in Korea). The dependent variable was time pressure measured by a single-item question on a four-point likert scale. The results of the study showed that working mothers perceived a greater time shortage as compared to working fathers. The time use pattern showed change during the periods, indicating that people worked fewer hours in paid labor and enjoyed more leisure hours and personal care hours. However, on average, people seemed to have experienced a greater time lack in 2009 as compared to 1999. The results from the ordered logistic regression model revealed that even though there were similarities in the impact of relevant factors, men's perception of a lack of time was more closely linked with their work role and social status, while for women, this perception was influenced by work and family duties. This indicates that Korean working mothers and fathers are facing a double jeopardy of time shortage in terms of combining their work and family roles. As a result, the level of time pressure by gender is converging toward a "never enough" phase. These findings generated policy implications and detailed suggestions.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.6
• /
• pp.859-866
• /
• 2001

Successful project planning relies on a good estimation of the effort required to complete a project, together with the schedule options that may be available. Despite the extensive research done developing new and better models, existing software effort estimation models are present only the total effort and effort (or manpower： people per unit time) function for the software life-cycle. Also, Putnam presents constant effort rate in each subcycles. However, the size of total efforts are variable according to the software projects under the influence of its size, complexity and operational environment. As a result, the allocated effort in subcycle also differ from project to project. This paper suggests the linear and polynomial effort estimation models in specifying, building and testing phase followed by the project total effort. These models are derived from 128 different projects. This result can be considered as a practical guideline in management of project schedule and effort allocation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.496-502
• /
• 2006

The complexity of IC has rapidly increased as VLSI fabrication technology has grown up quickly. This paper proposes verification methods for data conflicts and protocol between IPs for SoC with coverage metrics. The high-level events is defined to cooperation between blocks or process statement in HDL, or a sequence of performing a job compared to low-level event. They are classified into two categories, resource conflicts and protocol or specification-dependent conflicts. And two coverage metrics used for code coverage in low-level event are proposed to verify the hish-level events. The events of resource conflicts can be detected by using statement coverage metric if global signal or variable has flags in a testbench program, and protocol-dependent events can be checked by data flow metric or path metric.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.2
• /
• pp.197-215
• /
• 2015

Modeling water flow in variably saturated, porous media is important in many branches of science and engineering. Highly nonlinear relationships between water content and hydraulic conductivity and soil-water pressure result in very steep wetting fronts causing numerical problems. These include poor efficiency when modeling water infiltration into very dry porous media, and numerical oscillation near a steep wetting front. A one-dimensional finite element formulation is developed for the numerical simulation of variably saturated flow systems. First order backward Euler implicit and second order Crank-Nicolson time discretization schemes are adopted as a solution strategy in this formulation based on Picard and Newton iterative techniques. Five examples are used to investigate the numerical performance of two approaches and the different factors are highlighted that can affect their convergence and efficiency. The first test case deals with sharp moisture front that infiltrates into the soil column. It shows the capability of providing a mass-conservative behavior. Saturated conditions are not developed in the second test case. Involving of dry initial condition and steep wetting front are the main numerical complexity of the third test example. Fourth test case is a rapid infiltration of water from the surface, followed by a period of redistribution of the water due to the dynamic boundary condition. The last one-dimensional test case involves flow into a layered soil with variable initial conditions. The numerical results indicate that the Crank-Nicolson scheme is inefficient compared to fully implicit backward Euler scheme for the layered soil problem but offers same accuracy for the other homogeneous soil cases.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.79-90
• /
• 2000

In this paper, a high-performance floating point unit, which is suitable for high-performance superscalar microprocessors and supports IEEE 754 standard, is designed. Floating-point arithmetic unit (AU) supports all denormalized number processing through hardware, while eliminating the additional delay time due to the denormalized number processing by proposing the proposed gradual underflow prediction (GUP) scheme. Contrary to the existing fixed-radix implementations, floating-point divide/square root unit adopts a new architecture which determines variable length quotient bits per cycle. The new architecture is superior to the SRT implementations in terms of performance and design complexity. Moreover, sophisticated exception prediction scheme enables precise exception to be implemented with ease on various superscalar microprocessors, and removes the stall cycles in division. Designed floating-point AU and divide/square root unit are integrated with and instruction decoder, register file, memory model and multiplier to form a floating-point unit, and its function and performance is verified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.518-521
• /
• 2005

The Structures or buildings nowadays draw more complexity in design due to space limitation and other factor that affect the height and dimensions, that results to instability. So the various methods have been carried out to improve the safety factor from an earthquake or a boom until recently. But, it is very hard to get model precisely because these structures are the non-linear and multi-variable systems. For this reason, we developed the active control system that is applied the adaptive control method on the U type Tuned Liquid Damper(TLD) passive control system. It is proven that the proposed active control strategy of the plate carrying U type TLD system is the more effective control method to suppress the vibration of the structure. The entire hybrid control system is composed of the actuator acted in the opposite direction of the TLD system's motion direction and the active control device with an air pressure adjuster. This paper proposed the adaptive control methods to improve the problem of U type TLD system which is used widely for the passive control of the building. And it is proved by the simulation. In advanced, it is developed the pressure control method that is improved the hybrid controller's performance by using air chamber pressure controller. These methods take the advantage of the decrease of the maximum displacement by using the controller as soon as the impact is loaded. This is a very important element for the safety design and economic design of structures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.6
• /
• pp.1401-1414
• /
• 2018

The k-means clustering algorithm groups input data with the number of groups represented by variable k. In fact, this algorithm is particularly useful in market segmentation and medical research, suggesting its wide applicability. In this paper, we propose a privacy-preserving clustering algorithm that is appropriate for outsourced encrypted data, while exposing no information about the input data itself. Notably, our proposed model facilitates encryption of all data, which is a large advantage over existing privacy-preserving clustering algorithms which rely on multi-party computation over plaintext data stored on several servers. Our approach compares homomorphically encrypted ciphertexts to measure the distance between input data. Finally, we theoretically prove that our scheme guarantees the security of input data during computation, and also evaluate our communication and computation complexity in detail.

• Asia-Pacific Journal of Business
• /
• v.12 no.3
• /
• pp.1-36
• /
• 2021

Purpose - This empirical study, aims to identify the determinants of adoption and acceptance of mobile payment as to understand why it is successful in some countries in Sub-Saharan Africa but failing in others. A comparative study of a successful mobile payment service and a purported failed one was done as to have some insights to the factors affecting acceptance of the technology. Design/methodology/approach - The strength of three notable theories: theory of diffusion of innovation (DOI), the extended unified theory of user acceptance of information technology (UTAUT2) and self-efficacy theory were use. The self-efficacy of government support inclusion as, a moderating variable in the form of infrastructure, securing transaction and price value revealed the relevance of government in the success of mobile payment service. By means of a field survey of 705 subjects in two separate regions of Africa (East and West), the data was collected and use to test the research model. Findings - The study result shows the importance of the moderating factor of government support to the success of mobile payment of any nation. The result also shows the importance of the perception of relative advantage, compatibility, complexity, social influence as already revealed by other studies. Research implications or Originality - Mobile payment success in some part of Sub-Saharan Africa is well known but also suggested to fail in some Sub-Saharan African countries. Buttressing the need for understanding of the factors affecting mobile payment acceptance. This article empirically examined the factors influencing the success of mobile payment, and we implicated that if the implementation of mobile payment is to be successful for mobile commerce in any nation, adoption, acceptance and use by its citizen is imperative.