• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.64-68
• /
• 2012

We have successfully demonstrated a bandgap alteration of transparent zinc oxide (ZnO) thin film with Mg dopant by using sol-gel spin coating technique. By increasing the dopant from 0 to 30 atomic percent (at.%), a decrement value in the cutoff is observed, where the absorption edge shifts continuously to the shorter wavelength side, towards 300 nm. This resulted in a significant bandgap increment from 3.28 to 3.57 eV. However, the transmittance of the thin film at 350-800 nm gradually downgraded, from 93 to 80 % which is most probably due to the grain size that becomes bigger, and it also affected the electrical properties. The decrement from 45 to 0.05 mA at +10 V was observed in the I-V characteristics, concluding the significant relationship; where higher optical bandgap materials will exhibit lower conductivity. These findings may be useful in optoelectronics devices.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.233-236
• /
• 2012

The driving properties of a particle-insertion method that filters non-moving particles are analyzed, by measuring its optical and electrical properties. An area that is occupied by the moved particles is proposed, as a desirable evaluation method for a reflective display. To compare the driving property of the particle-moving method with that of the reported simple particle-loading method, two panels are fabricated, according to the different particle-insertion methods, in the same panel condition, of which the width of ribs is $30{\mu}m$, the cell size is $220{\mu}m{\times}220{\mu}m$, the cell gap is $116-120{\mu}m$, the q/m value of the black particles is $+1.8{\mu}C/g$ and that for the white particles is $-4.3{\mu}C/g$. The particle-moving method has a filtering effect which excludes the non-moving particles, inserting only movable particles into the respective cell, so that a panel fabricated by the particle-moving method can drive most of the particles in a cell. Also, most of the particles move at the threshold voltage of 40 V, with enhanced reflectivity. The driving property is also verified by measurement of the occupation rate of the moved particles.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.157-172
• /
• 2020

This study attempts to analyze trade flows between Vietnam and China in order to understand the mutual influence of bilateral trade relations. China is a country with the world's leading economic potential. China and Vietnam are neighboring countries sharing a border of 1,281 km. Trade relations between the two countries are a necessity and, with a right policy, are beneficial to both. Vietnam has a trade deficit with China. This situation is exacerbated by the continuing rise in the gap. Vietnam trade deficit from China was USD12.5 billion in 2010, increasing to USD24 billion in 2018. Data are extracted from the 2015 national input-output tables of Vietnam and China as well as Vietnam Household Living Standard Survey statistics. The research identified 36 sectors of bilateral input-output trade between Vietnam and China. A bilateral output-input model is applied to analyze how final demand and use of input in the production of this country induces output and value added of the other country. The results show that China benefits more from Vietnam's production and consumption than Vietnam does. Vietnam's inter-sector structure does not stimulate domestic production due to the absence of supporting products as inputs in the production process.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.279-284
• /
• 2020

In this work, a carbon-doped carbon nitride photocatalyst is successfully synthesized through a simple centrifugal spinning method after heat treatment. The morphology and properties of the prepared photo catalyst are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrophotometer (UV-vis), and specific surface area. The results show that the band gap of the prepared sample, g-CN-10 is 2.1 eV, is significantly lower than that of pure carbon nitride, 2.7 eV. As the amount of cotton candy increased, the absorption capacity of the prepared catalyst for visible light is significantly enhanced. In addition, the degradation efficiency of Rhodamine B (RhB) by sample g-CN-10 is 98.8 % over 2 h, which is twice that value of pure carbon nitride. The enhancement of photocatalytic ability is attributed to the increase of specific surface area after the carbon doping modifies carbon nitride. A possible photocatalytic degradation mechanism of carbon-doped carbon nitride is also suggested.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.281.2-281.2
• /
• 2016

Two-dimensional van der Waals (2D vdWs) materials have been extensively studied for future electronics and materials sciences due to their unique properties. Among them, black phosphorous (BP) has shown infinite potential for various device applications because of its high mobility and direct narrow band gap (~0.3 eV). In this work, we demonstrate a few-nm thick BP-based nonvolatile memory devices with an well-known poly(vinylidenefluoride-trifluoroethylene) [P(VDF-TrFE)] ferroelectric polymer gate insulator. Our BP ferroelectric memory devices show the highest linear mobility value of $1159cm^2/Vs$ with a $10^3$ on/off current ratio in our knowledge. Moreover, we successfully fabricate the ferroelectric complementary metal-oxide-semiconductor (CMOS) memory inverter circuits, combined with an n-type $MoS_2$ nanosheet transistor. Our memory CMOS inverter circuits show clear memory properties with a high output voltage memory efficiency of 95%. We thus conclude that the results of our ferroelectric memory devices exhibit promising perspectives for the future of 2D nanoelectronics and material science. More and advanced details will be discussed in the meeting.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.724-728
• /
• 2005

Electro-optic characteristics of reflective hybrid aligned liquid crystal (LC) cell driven by fringe field using a nematic LC with positive dielectric anisotropy have been studied. Optimized optical configurations are achieved by using a single polarizer, half-wave film and a cell with quarter-wave retardation. The simulation results shows an optimum cell retardation of $0.30{\mu}m$. This value may allow a practical cell gap larger than $3{\mu}m$, which makes it easy to control in the manufacturing process. Furthermore, this LC cell with optimized cell parameters shows low wavelength dispersion and the contrast ratio greater than 5 over exists about $100{\circ}$ in vertical direction and $160{\circ}$ in horizontal direction. Also, when using the LC with positive dielectric anisotropy rather than negative dielectric anisotropy, the display shows low power consumption and fast response time.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.244-247
• /
• 2003

All over the value chain, a logistics information system must satisfy several requirements about gathering and sharing related information. For example, distributors or forwarders need up-to-date information for scheduling and managing their logistics resources. Meanwhile, consignors or consignees want to know the dynamic information about current states or location of their goods. Such information is dependent upon the quality of data sets collected throughout the logistics processes. Thus, gathering accurate data promptly is the essential factor for the success of a logistics information system. However, there are limits in reducing both time-gap and man-power for datn sourcing, since this process is done manually or by using bar codes and scanning devices. Smart-tag can be the alternative to such n time-consuming and inefficient operation, especially for handling piles of goods. The tag includes a micro-chip containing data which is remotely readable by readers with antenna. Logistics system with Smart tag can provide all the information anywhere and anytime, and it will increase the efficiency of logistics and satisfaction of users. In this paper, we propose a conceptual architecture for smart-tag based logistics system and describe its functions.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.623-630
• /
• 2011

This study investigated the degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) by using dielectric barrier discharge (DBD) plasma. The DBD plasma reactor of this study consisted of a quartz dielectric tube, titanium discharge (inner) and ground (outer) electrode. The effect of shape (rod, spring and pipe) of ground electrode, diameter (9~30 mm) of ground electrode of spring shape and inside diameter (4~13 mm) of quartz tube, electrode diameter (1~4 mm), electrode materials (SUS, Ti, iron, Cu and W), height difference of discharge and ground electrode (1~15.5 cm) and gas flow rate (1~7 L/min) were evaluated. The experimental results showed that shape of ground electrode and materials of ground and discharge electrode were not influenced the RNO degradation. The thinner the diameter of discharge and ground electrode, the higher RNO degradation rate observed. The effect of height gap of discharge between ground electrode on RNO degradation was not high within the experimented value. Among the experimented parameters, inside diameter of quartz tube and gas flow rate were most important parameters which are influenced the decomposition of RNO. Optimum inside diameter of quartz tube and gas flow rate were 7 mm and 4 L/min, respectively.

• 천문학논총
• /
• 제10권1호
• /
• pp.91-108
• /
• 1995

We have intensively examined the structure of photospheric magnetic fields obtained from the calculation of the polarized radiation transfer for the model atmosphere. To determine more reliable magnetic field in the photospheric region composed of umbra, penumbra and quite area, we have calculated the polarized radiative transfer for a magnetically sensitive spectral line, FeI $6302.5{\AA}$, using our composite model representing three kinds of the atmospheric area distinguished by the pixel value of the Stokes I image over the region. Polarization data of the full Stokes parameters, used in this paper had been obtained from the vector magnetograph on Solar Flare Telescope of National Astronomical Observatory at Mitaka(MTK) in Japan. According to our investigation on the active region in the photosphere, it has been found that the large current density(${\geq}8{\times}10^2A/km^2$) and shear angle(${\geq}85^{\circ}$) should be distributed along the magnetic neutral line. To be compared with the results of MTK, our results in transverse magnetic field strength and direction are similar with those of MTK, however our longitudinal field strength at the center of the spot is somewhat(${\sim}1000$ Gauss) larger than MTK.

• 한국보육지원학회지
• /
• 제15권6호
• /
• pp.1-19
• /
• 2019

Objective: This study aims to examine the level of parental perceptions and practices on parental role responsibilities for children enrolled in preschools and to verify the differences. Methods: A total of 301 parents whose children were attending preschools participated in this study. The collected data were analyzed for frequency, factor analysis, and reliability. In addition, the t-test and the Importance-Performance Analysis (IPA) were performed. Results: First, there are relatively high levels of perception and practices of parental role responsibilities. Second, parental perception of parental role responsibilities is higher than the level of actual performance. Third, although parents were highly aware of their role responsibilities, there is a great expectation of the role of preschools for the development of the social competence of children. Fourth, parents value the level of practice of role responsibilities in preschools relatively high. Conclusion/Implications: Support systems are needed to reduce the gap between parental perception and practice of their role responsibilities for children enrolled in preschools.