• 한국가구학회지
• /
• 제10권2호
• /
• pp.29-36
• /
• 1999

During a radio-frequency/vacuum plus press drying process of some hardwood veneers for decoration we investigated the effect of a grain and thickness of a veneer sheet on drying rates, variations of final moisture content within a bundle of veneer sheets, and formation of checking, end waving, and burning mark. About thirty three hundreds sheet of veneer could be dried in sixty five hours from green to in0-use moisture content, and a final moisture content was significantly effected by initial moisture content of veneer. There were nearly variations in a final moisture content among the veneer sheets in the same bundle. A checking was never found in a edge-sliced veneer, and very slight in a flat-sliced veneer of ash and red oak. There were no end waving and no burning mark in all veneer sheets.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.134-135
• /
• 2016

This study aims to compare relative moisture content and gravity moisture content in calculating the rational percentage of moisture content. High-strength concrete, which is made of blast-furnace slag and silica fume, was used as the compound for this study, and the specimens were made into a saturated condition through the vacuum suction. According to the results of this study, all specimens were completely dried when they were under the temperature of 105℃ for more than 31 days. They were fully saturated after 72 hours through vacuum suction. In addition, relative moisture content responded more sensitively to moisture content than gravity moisture content did, so it can be concluded that relative moisture content is better in calculating the rational percentage of moisture content.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1341-1352
• /
• 2001

Vacuum freeze drying process by which frozen water in a drying material is removed sublimation under vacuum condition, is now applied to various industrial field such as the manufacturing and packaging of pharmaceuticals in pharmaceutical industry, the drying of bio- products in bio-technology industry, the treatment of various quality food stuff in food technology, and so on. The Knowledge about the heat and mass transfer characteristics related with the vacuum freeze drying process is crucial to improve the efficiency of the process as well as the quality of dried products. In spite of increasing needs for understanding of the process, the research efforts in this fields are still insufficient. In this paper, a numerical code that can predict primary drying in a vial is developed based on the finite volume method with a moving grid system. The calculation program can handle the axis- symmetric and multi-dimensional characteristics of heat and mass transfer of the vial freeze drying process. To demonstrated the usefulness of the present analysis, a practical freeze drying of skim Milk solution in a vial is simulated and various calculation results are presented.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.456-465
• /
• 2013

Log cross sections of yellow poplar were dried in a radio frequency vacuum (RFV) dryer under alternating vacuum and release (AVR) process. The average moisture content (MC), temperature and vapor pressure at the volumetric center were monitored as functions of time. Three different log thicknesses (33, 60 and 75mm) were tested. The results show that the AVR process caused an increase in the drying rate when the moisture content was above fiber saturation point (FSP, about 30% MC) but that it had an inverse effect on the drying rate when the MC was below FSP. The effect of the AVR process on the drying rate decreased, and the severity of heart checks increased, with the increase in the thickness of the specimens.

• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.39-48
• /
• 1993

End-matched disks of 7.7cm thickness were part-time dried in vacuum press dryer to investigate the drying characteristics by using drying schedules and end treatments. The ginkgo disks could be dried faster with severer end checks and ring failures by C schedule than by S schedule. There were no significant differences in drying rates and amounts of end checks, ring failures and V-shaped checks occurred between ginkgo disks end-taped with Korean traditional paper (KTP) and those untreated. The drying time of walnut disks was slightly reduced by end-taping with KTP. And the length of end checks and V-shaped checks and the frequency of defected disk were decreased more effectively than those untreated. The tangential strains and tangential drying stresses near bark sides of ginkgo and walnut disk untreated were developed in the early stage of drying and incresed slightly curvi-linearly above fiber saturation point (fsp) and more curvi-linearly below fsp. The influence of end-taping with KTP on the drying rate for impermeable walnut disk was stronger than that for permeable ginkgo disk.

• Journal of the Korean Wood Science and Technology
• /
• 제32권4호
• /
• pp.18-26
• /
• 2004

변장 14 cm 재장 2.4 m인 대단면재의 전도가열, 고주파가열 및 복합가열에 의한 진공건조특성을 조사하였다. 건조속도는 복합가열에서 가장 컸고, 고주파가열에서 가장 적었다. 비에너지는 고주파가열에서 가장 컸고, 전도가열에서 가장 적었다. 진공건조목재의 횡단방향 함수율분포는 전도가열과 복합가열의 경우 불록한 형태를 나타냈으나, 고주파가열의 경우는 한쪽 표층에서 반대쪽 표층으로 향해 증가하는 경향을 나타내었다. 건조목재의 재장방향 함수율은 전도가열과 복합가열의 경우 횡단면이 중심부위보다 낮았고 고주파가열의 경우 횡단면이 중심보다 높았다. 표면할렬과 횡단면할렬은 전도가열진공건조에서 가장 심하였다. 내부할렬은 어떠한 가열방법에 의한 건조에서도 발생하지 않았다. 복합가열 진공건조 특성은 전도가열과 고주파가열간의 절충된 중간적 경향을 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.31-37
• /
• 2003

국내에 많이 조림되어 있는 은사시나무(Populus alba×P. glandulosa)의 효율적인 건조를 위해 기본적인 물리적 성질을 조사하였다. 캠퍼스에서 벌채한 원목을 32 mm 판목 판재로 제재하여 관행열기건조(저온건조), 고온건조, 마이크로파-진공(MW/V)건조의 3가지 방식으로 건조하여 건조속도, 건조결함, 길이방향 수분경사, 색상 등을 비교하였다. 평균생재비중(전건무게-생재부피 기준)은 0.349±0.074였으며, 심재의 생재함수율은 200% 내외, 변재는 100%내외로 심재 함수율이 더 높았다. 생재에서 전건까지의 수축율은 방사방향과 접선방향이 각각 2.4%와 7.3%였으며 심·변재간 차이는 없었다. 생재에서 함수율 10%까지 건조시간은 컨디쇼닝시간을 제외하고 저온건조는 65시간, 고온건조는 35시간, MW/V건조는 22시간이었으며, 건조목 표면을 색차계로 조사한 결과 MW/V건조 판재의 색상이 가장 밝고 깨끗하였다.

• Journal of Animal Science and Technology
• /
• 제45권4호
• /
• pp.633-640
• /
• 2003

인삼분말을 첨가한 돈가스와 첨가하지 않은 돈가스는 칼로리 함량 및 색도(CIE, L, a, b)에 있어 유의적인 차이가 없었으며 인삼분말 첨가수준을 달리한 (1${\sim}$3% 인삼분말 첨가) 튀김옷을 이용하여 제조된 돈가스 제품간에도 색도에는 차이가 없는 것으로 나타났다. 조리 후 진공포장하여 4$^{\circ}C$에서 15일간 저장한 결과 인삼분말을 첨가한 돈가스가 저장 전 기간에 TBA 값이 인삼분말을 첨가하지 않은 돈가스보다 낮게 나타났는데, 저장 5일째까지는 유의적인 차이가 있었으나 10일이후에는 처리구간에 유의적인 차이가 없는 것으로 나타났다. 조리 후 진공포장하여 -20$^{\circ}C$에서 90일간 저장한 결과 낮은 TBA 값을 나타냈으나 저장 90일째까지 0.5mg malonaldehyde/kg sample 수준을 넘지 않는 것으로 나타났다. 지방산 분석결과 인삼성분이 첨가된 돈가스가 첨가하지 않은 돈가스보다 Total MUFA 함량이 낮은 반면 Total PUFA함량은 높은 것으로 나타났으며 SFA 함량에 있어서는 차이가 없는 것으로 나타났다. 결과적으로 인삼을 첨가함으로서 MUFA/SFA 비율이 감소하고 PUFA/SFA 비율이 증가하는 경향을 나타냈다. 관능평가결과 인삼성분이 첨가된 돈가스가 첨가하지 않은 돈가스와 비교하여 인삼향 미와 함께 전반적인 기호도가 더 높게 나타났으며 튀김옷에 인삼분말을 1% 첨가한 처리구가 기호도가 가장 높게 나타났다. 따라서 본 연구는 인삼분말을 포함한 천연양념을 적절하게 배합하여 돈가스 제품의 저장기간을 연장할 수 있는 인삼분말 첨가수준을 설정하였으며 한국 전통식품이 아닌 돈가스 요리의 색다른 한국적 맛을 구현하면서 인삼특유의 효능 및 사포닌 성분이 함유된 돈가스 제품을 개발하였다.

• 한국수산과학회지
• /
• 제47권5호
• /
• pp.489-494
• /
• 2014

This study determined the effect of packaging and electron beam irradiation on the quality of dried Undaria pinnatifida. Samples were air or vacuum packaged and irradiated at 7 kGy. The dried Undaria pinnatifida had total viable cells and coliform counts of 5.51 and 4.40 log CFU/g in total, respectively, and counts of 5.56 and 4.19 log CFU/g in surface. These counts were reduced by 2-4 log cycles after irradiation. Irradiation increased the lightness and yellowness of the dried Undaria pinnatifida, but not the redness. In the sensory evaluation, there were no significant differences among samples. Therefore, electron beam irradiation improves the microbial safety and quality of dried Undaria pinnatifida.

• 한국수산과학회지
• /
• 제53권5호
• /
• pp.707-716
• /
• 2020

Red sea cucumber Stichopus japonicus, was dried using three methods-far-infrared ray, vacuum, and freeze drying and then enzymatically hydrolyzed using nine proteases: Alcalase, Flavourzyme, Kojizyme, Neutrase, Protamex, trypsin, α-chymotrypsin, and papain. In addition, the potential ability of hydrolysates to inhibit lipid accumulation in 3T3-L1 adipocytes was evaluated. The yield of hydrolysates from red sea cucumbers dried using each method was higher than that of the distilled water extract, and protein contents were either similar or higher. The hydrolysates that exhibited inhibitory effects on lipid accumulation, as demonstrated via Oil red O staining, were those obtained by far-infrared ray drying coupled with Alcalase, Flavourzyme, Kojizyme, or Neutrase treatment. In addition to the advantages of far-infrared drying and the characteristics of Flavourzyme, the Flavourzyme hydrolysate of far-infrared-dried red sea cucumber showed the highest inhibitory effect on lipid accumulation. In addition, this hydrolysate significantly decreased the expression of the protein factor fatty acid-binding protein 4, which is related to the late differentiation of 3T3-L1 adipocytes. Taken together, these results suggest that Flavourzyme hydrolysates from farinfrared-dried red sea cucumber may be used as a functional food and/or a pharmaceutical ingredient for the inhibition of lipid accumulation.