• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1139-1153
• /
• 2020

Upper body types were classified to develop the sizing system of the cycling wear top for the high school male cyclist. The research methods were performed using the anthropometric measurements of 111 high school male cyclists that included cluster analysis was performed. The research results are as follows. Type 1 (23.4%) has the longest biocromion length, is the tallest of the three types and a proper body type. Type 2 (25.2%) has the largest weight and developed muscles in the chest parts. Type 3 (51.4%) is the shortest of the three types and is a skinny body with a bending back. In order to develop a sizing system, the 12 anthropometric measurements were selected for correlation analysis. The bust circumference and stature were presented as the control dimensions of sizing system. The waist front, waist back length and biacromion length were less correlated with other items; consequently, they were independent items and were set as referable dimensions. Therefore, it was proposed as a sizing system because the 5 cm of bust and 5 cm of stature have a high coverage by body type. The total coverage rate was 81.9%.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.518-524
• /
• 2009

Single parity check (SPC) product codes are simple yet powerful codes that are used to correct errors and/or recover erasures. The focus of this paper is to evaluate the performance of such codes under erasure scenarios and to develop a closed-form tight upper bound for the post-decoding erasure rate. Closed-form exact expressions are derived for up to seven erasures. Previously published closed-form bounds assumed that all unrecoverable patterns should contain four erasures in a square. Additional non-square patterns are accounted for in the proposed expressions. The derived expressions are verified using exhaustive search. Eight or more erasures are accounted for by using a bound. The developed expressions improve the evaluation of the recoverability of SPC product codes without the need for simulation or search algorithms, whether exhaustive or novel.

• Journal of the Chungcheong Mathematical Society
• /
• v.17 no.1
• /
• pp.47-56
• /
• 2004

The nonlinearity of a Boolean function f on $GF(2)^n$ is the minimum hamming distance between f and all affine functions on $GF(2)^n$ and it measures the ability of a cryptographic system using the functions to resist against being expressed as a set of linear equations. Finding out the exact value of the nonlinearity of given Boolean functions is not an easy problem therefore one wants to estimate the nonlinearity using extra information on given functions, or wants to find a lower bound or an upper bound on the nonlinearity. In this paper we extend the notion of auto-correlations of Boolean functions to vector Boolean functions and obtain upper bounds and a lower bound on the nonlinearity of vector Boolean functions in the context of their auto-correlations. Also we can describe avalanche characteristics of vector Boolean functions by examining the extended notion of auto-correlations.

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.145-157
• /
• 1993

This study aimes to investigate the garment ease of pe-school children's clothing in accordance with arm movement. The experiment was done with 4 per-school children fro mage 3 to age 5, and 3 types of experimental clothes were made ; sleeveless, half sleeve, and long sleeve. The waist pattern and the sleeve pattern of each experimental clothes has no garment ease. And experimental clothes were examined to obtain the necessary ease of armcye line and waist lien by cross-cut method. The results of investigation can be summarized as follows ; 1. The resulting movement ranges of experimental clothes with no garment ease were 131.5°(sleeveless), 71.75°(half sleeve), and 62.25°(long sleeve). 2. The size order of cross-cut opening of waist lien movement were (side>front>back), and (half sleeve>long sleeve>sleeveless). 3. When the base point of measurement was set to armpit point by arm the latitudinal length of cross-cut opening of armcye line by arm movement was (anterior armpit part > posterior armpit part), and longitudinal length of cross-cut opening was (upper part>lower part).

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.63-68
• /
• 1998

This paper proposes fuzzy regression analysis with non-symmetric fuzzy coefficients. By assuming non-symmetric triangular fuzzy coefficients and applying the quadratic programming fomulation, the center of the obtained fuzzy regression model attains more central tendency compared to the one with symmetric triangular fuzzy coefficients. For a data set composed of crisp inputs-fuzzy outputs, two approximation models called an upper approximation model and a lower approximation model are considered as the regression models. Thus, we also propose an integrated quadratic programming problem by which the upper approximation model always includes the lower approximation model at any threshold level under the assumption of the same centers in the two approximation models. Sensitivities of Weight coefficients in the proposed quadratic programming approaches are investigated through real data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.633-637
• /
• 1995

Numerical calculation tool for forging of gear-like components based on kinematically admissible velocity fields for upper bound method applicable to various deformation features of workpiece in forging processes were suggested. Each one of them deals with unidirectional flow of metal on dies, such as external involute spur gear, sequare spline, internal serrations. A complex calcuation tool of gear-like component forging process was built up by combining these kinematically velocity fields. In this paper, the workpiece with both external and internal teeth is divided into two parts. The deformation of each part is analyzed simultaneously using numerical calculation tool form combined kinematically admissible velocity field. The experimental set-up was installed in a 200 ton hydraulic press. As a result, each kinematically admissible velocity field could be combined with other and the calculated solution are useful to predict the capacity of forging equipment.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.1
• /
• pp.57-68
• /
• 2015

When a straight channel formed by two parallel porous plates, through which two immiscible liquids occupying different heights are flowing a secondary motion is set up. The motion is caused by moving the upper plate with a uniform velocity about an axis perpendicular to the plates. The solutions are exact solutions. Here we discuss the effect of suction parameter and the position of interface on the flow phenomena in case of Couette flow. The velocity distributions for the primary and secondary flows have been discussed and presented graphically. The skin-friction amplitude at the upper and lower plates has been discussed for various physical parameters.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.4
• /
• pp.1017-1031
• /
• 2016

Let R be a commutative ring with the non-zero identity and n be a natural number. ${\Gamma}^n_R$ is a simple graph with $R^n{\setminus}\{0\}$ as the vertex set and two distinct vertices X and Y in $R^n$ are adjacent if and only if there exists an $n{\times}n$ lower triangular matrix A over R whose entries on the main diagonal are non-zero such that $AX^t=Y^t$ or $AY^t=X^t$, where, for a matrix B, $B^t$ is the matrix transpose of B. ${\Gamma}^n_R$ is a generalization of Cayley graph. Let $T_n(R)$ denote the $n{\times}n$ upper triangular matrix ring over R. In this paper, for an arbitrary ring R, we investigate the properties of the graph ${\Gamma}^n_{T_n(R)}$.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.81-89
• /
• 1998

Numerical calculation tools for forging of gear-like components based on kinematically admissible velocity fields for upper bound method applicable to various deformation features of workpiece in forging processes were suggested. Each one of them deals with unidirectional flow of metal on dies, such as external involute spur gear. square spline, internal serrations. A complex calculation tool of gear-like component forging process was built up by combining these kinematically velocity fields. In this paper the workpiece with 110th external and internal teeth is divided into two parts. The deformation of each part is analyzed simultaneously using numerical calculation tool from combined kinematically admissible velocity field. The experimental set-up was installed in a 200 ton hydraulic press. As a result, each kinematically admissible velocity field could be combined with others and the calculated solution are useful to predict the capacity of forging equipment.

• Communications of the Korean Mathematical Society
• /
• v.9 no.3
• /
• pp.593-598
• /
• 1994

In this note we give some results on the jump (due to Kato [5] and West [7]) of a semi-Fredholm operator. Throughout this note, suppose X is an Banach space and write L(X) for the set of all bounded linear operators on X. A operator $T \in L(x)$ is called upper semi-Fredholm if it has closed range with finite dimensional null space, and lower semi-Fredholm if it has closed range with its range of finite co-dimension. It T is either upper or lower semi-Fredholm we shall call it semi-Fredholm and Fredholm it is both. The index of a (semi-) Fredholm operator T is given by $$ index(T) = n(T) = d(T),$$ where $n(T) = dim T^{-1}(0)$ and d(T) = codim T(X).