• 대한수학회보
• /
• 제49권6호
• /
• pp.1199-1211
• /
• 2012

In this paper we give an introduction to the theory of universal central extensions of perfect Lie algebras. In particular, we will provide a model for the universal coverings of Lie tori and we show that automorphisms and derivations lift to the universal coverings. We also prove that the universal covering of a Lie ${\Lambda}$-torus of type ${\Delta}$ is again a Lie ${\Lambda}$-torus of type ${\Delta}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.487-491
• /
• 1988

This paper describes the universal-type signaling service equipment which provides a signaling service function (R2 MFC, DTMF, Continuity check tone, and Audible tone sending and/or receiving) for call processing control in TDX-10 switching system. Based upon the structure of the TDX-10 switching system, the philosophy of design and technology on the universal-type signaling service equipment has been investigated in order to realize a reduction in size and cost, as well as assuring high reliability and flexible operation. Finally, the control method, fuctional operation and principal feature of the designed universal-type signaling service equipment have been described.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.211-215
• /
• 2006

This paper presents a new structure for the universal motor using soft magnetic composite (SMC). The stator for this new type of motor is made by combination of the SMC pole and the silicon steel yoke. The shape of the 3D SMC pole is designed to minimize ohmic loss and amount of stator coil. To design the pole shape, the 3D analysis in the design procedure is replaced with an equivalent 2D analysis. Finally, the optimal shape is analyzed by 3D FEM and the performance is discussed.

• 농촌계획
• /
• 제21권2호
• /
• pp.51-61
• /
• 2015

The necessity of universal design for forestry is increasing. Although several studies applied universal design in forest site, they had been only concentrated on the barrier-free design for the limited activities rather than overall utilization for considering all visitors from the disabled, the elderly and the infirm to the baby and child. The purpose of this study is to find out the principle of the universal design within forest welfare service facilities by analysing how socially disadvantaged people perceive overall usage of natural recreation forest area. This study figures out the main principles of universal design in forest welfare through analyzing usage of children and disabilities in Yumyeongsan natural recreation forest where is one of the popular type of forest welfare area. By doing focus interviews targeted on children and disabilities, the results are analyzed through semantic network analysis, objectively. The result proves that universal design in forest welfare area contains four principles; convenience, safety, diversity and amenity. Also it confirmed that disabilities need better internal space facilities and priority care. Through those characters of universal design, forest area will be able to cover more various type of users as forest welfare area.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.50-57
• /
• 2017

Purpose : This paper is a comparative analysis results of the fatigue test for dental implants and accelerated life test by using a static type loading device commonly used in Korea and a dynamic type loading device (universal-joint) recommended by FDA. Methods : Fatigue tests of dental implant is based on ISO 14801 and classified into static load test and dynamic load test. The tests were carried out on three test specimens by four load stress steps under each loading device. For analysis on failure mode such as crack, fracture and permanent deformation of test specimens, we used X-ray three-dimensional computed tomography on test specimens before and after the fatigue tests. The design of the accelerated life test was based on the analysis results of the fatigue life data obtained from the dynamic load test and the statistical analysis software (Minitab ver.15) was used to analyze the appropriate life distribution. Results : As a result of the fatigue tests and the accelerated life tests at same acceleration condition under each test method, the fatigue life under the dynamic type loading device (universal-joint) was shorter than when static type loading device was applied. Conclusion : This paper can be used as a reference when the universal-joint type loading device for implants fatigue test is applied as ISO 14801.

• 호남수학학술지
• /
• 제31권3호
• /
• pp.267-278
• /
• 2009

As a survey-type article, the paper reviews the recent results on a (generalized) universal covering space in digital covering theory. The recent paper [19] established the generalized universal (2, k)-covering property which improves the universal (2, k)-covering property of [3]. In algebraic topology it is well-known that a simply connected and locally path connected covering space is a universal covering space. Unlike this property, in digital covering theory we can propose that a generalized universal covering space has its intrinsic feature. This property can be useful in classifying digital covering spaces and in studying a shortest k-path problem in data structure.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.140-146
• /
• 2001

Seals in a universal joint bearing are important components reinforcing lubrication performance by holding lubricant and preventing infiltration of dust, moisture, etc.. There is a great difference in seal performance according to seal shape and bonding position. Therefore, in this study, as for both the lip type seal and the O-ring type seal, FE analysis is conducted using Mooned-Rivlin Model. The results show that O-ring type seal does not have any effect of misalignment angle compared with lib type seal, which is more profitable.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• 유통과학연구
• /
• 제15권4호
• /
• pp.79-89
• /
• 2017

Purpose - Previous studies have not paid attention to pride type and effort type when consumers feel pride. In the present paper, the pride was divided into the two types such as hubristic pride and authentic pride. The causes attributed to achieve the goals when consumers achieved their personal goals, which could induce their pride were divided into trait, special effort, and universal effort, gratitude. This research attempted to investigate the mediation role of self-reward deservingness in finding the differences of inclination to indulgent consumption among the traits or special effort, the universal effort, and other's help. Research design, data, and methodology - In the empirical study, 'general flour food restaurants, Kimbabchunkuk, Edya, etc.' and 'VIPS, Outback, Starbucks, etc.' were taken as the two groups of subjects as empirical brand goods since they presented good contrast with each other. The single-factor design between subjects was adopted in this study by classifying the causes attributable to achieving the pre-goals of consumers into 4 categories: one attributable to trait; one attributable to special effort; one attributable to universal effort; one attributable to other's help. Results - The outcomes from the empirical analysis are as followings. First, the consumers who attributed to trait or special effort for achieving their personal goals in advance turned out to show stronger inclination toward direct indulgent consumption than those who attributed to universal effort or other's help for achieving the goals, without regard to self-reward deservingness. Second, those consumers who attributed to special effort for achieving their personal goals in advance revealed stronger inclination toward indulgent consumption with mediation of self-reward deservingness than those who attributed to trait or universal effort. And those who attributed to special effort or trait for achieving the goals revealed stronger inclination toward the consumption with the mediation of the deservingness than those who attributed to other's help. Conclusions - The present study is contributing to the progress of theories concerning hubris pride, authentic pride, and indulgent consumption. Marketing managers should endeavor to find pride type consumers felt according the causes attributed to for achieving important goals in advance, and make an efforts to develop messages that could appeal to the pride type.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.343-347
• /
• 1992

In this paper, an unilateral teleoperation system using an universal master arm is developed. This system is composed of an universal master arm, a slave arm and a telerobot controller. The universal master arm has a vertically articulated type link structure, while an industrial robot is used as a slave arm. As the shapes of master arm and slave arm are different, the workspace mapping is needed, which maps the workspace of master arm to that of slave arm. Experimental results show that the slave arm of the developed system effectively follows the operator's motion.