• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.85-91
• /
• 2007

This study was carried out to minimize the lifting force of a two hinge type stand mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with a coil spring and disc springs as a torque generator. The maximum and the minimum torque value should be calculated initially for the smooth lift. And the reasonable torque distribution is necessary to prevent any auto lift and auto dropping at any position because the torque generated by coil spring is more sensitive than disc spring in tilting the position. Therefore, the analysis of the coil spring is requisite to issue the specific torque value depending on the distorted angle with securing reliability of a long time storage condition. After the theoretical torque value was calculated, the evaluation was carried out by making a proto-type sample, then distorted angle was updated by experiment. The result of this study can readily be applied to various units for the optimization of the smooth lift.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1051-1061
• /
• 2004

본 논문에서는 반원형 및 반타원형 디스크가 급전점에 수직으로 로딩된 단순한 광대역 모노폴 안테나 구조에 급전점에는 추가적인 공진 구조를, 수직 모노폴 안테나의 끝단에는 수평으로 추가적인 소형 디스크가 로딩되는 초광대역 안테나의 특성에 관하여 시뮬레이션과 측정이 수행되었다. 설계된 초광대역 송신용 안테나로부터 가우시안 펄스의 전달 특성에 관하여 살펴보며 제안된 안테나의 수평방향을 단면으로 보았을 경우의 복사패턴이 등방향성 응답을 가짐을 알 수 있었다. 더욱이, 측정 및 시뮬레이션 결과로부터 소형이면서 광대역 특성을 보임을 알 수 있다. 제안된 수평방향의 소형 디스크가 장착된 반원형 디스크 모노폴 안테나의 측정결과로부터, 크기와 전기적인 성능 측면에서 살펴보았을 때 제안된 구조가 단순히 원형 디스크가 수직으로 로딩된 모노폴 안테나에 비해 견줄만 함을 알 수 있었다. 특히 본 논문을 통하여 제작된 안테나는 PCB를 이용한 프린팅 안테나에서 자주 발생되는 표면파 손실 및 유전체 손실과 같은 현상이 발생되지 않으므로 Return Loss의 성능이 곧 복사되는 효율과 밀접한 관계가 있다.

• 대한수학회논문집
• /
• 제32권4호
• /
• pp.789-803
• /
• 2017

Let $K={\mathbb{Q}}({\alpha})$ be a cubic field where ${\alpha}$ is an algebraic integer such that $disc_K({\alpha})$ is square-free. In this paper we will classify the structure of the unit group of the quotient ring ${\mathcal{O}}_K/A$ for each non-zero ideal A of ${\mathcal{O}}_K$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1000-1003
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. This newly suggested actuator features DVD-RAM recording, we achieved the high focus & track AC sensitivity and the greatly stabilized system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.397.1-397
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. (omitted)

• Kyungpook Mathematical Journal
• /
• 제28권2호
• /
• pp.147-154
• /
• 1988

For a positive integer p, $A_p$ will denote the class of functions $f(z)=z^p+\sum\limits^{\infty}_{n=p+1}a_nz^n$ which are analytic in the unit disc U = {z: |z| <1}. For $0{\leq}{\alpha}{\leq}1$, 0<${\beta}{\leq}1$, $0{\leq}{\lambda}$ $S_p({\alpha},{\beta},{\lambda})$ denote the class of functions $f(z){\in}A_p$ which satisfy the condition $\left|\frac{{\frac{zf^{\prime}(z)}{f(z)}}-p}{{{\alpha}{\frac{zf^{\prime}(z)}{f(z)}}+p-{\lambda}(1+{\alpha})}}\right|$<${\beta}$ for $z{\in}U$ In this paper we obtain a representation theorem for the class $S_p({\alpha},{\beta},{\lambda})$ and also derive distortion theorem and sharp estimates for the coefficients of this class.

• Natural Product Sciences
• /
• 제23권1호
• /
• pp.5-8
• /
• 2017

An antimicrobial compound has been isolated from the leaves of Glochidion superbum. The compound was determined as methyl 3, 4, 5-trihydroxybenzoate (methyl gallate), based on ultraviolet (UV), infrared (IR), nuclear magnetic resonance (NMR) and mass spectroscopy (MS) analysis. The isolated compound exhibited potent antimicrobial activity against three clinical isolates of methicillin resistant Staphylococcus aureus (MRSA) by qualitative agar disc diffusion method and quantitative broth dilution method. Agar disc diffusion was done in a dose-dependent manner for each bacterial isolate at disc potencies of 25, 50, 100, and $150{\mu}g/disc$. The zones of inhibition were on average equal to 12.27, 14.20, 15.43, and 24.17 mm respectively. The inhibition zones were compared with that of vancomycin disc at $30{\mu}g$ as a reference standard. The MIC and MBC values were $50{\mu}g/ml$ and $100{\mu}g/ml$ respectively. The results of anti MRSA activity were analyzed using one-way ANOVA with Turkey's HSD and Duncan test. In conclusion, methyl gallate which was isolated from G. superbum showed the inhibition activity against methicillin resistant S. aureus.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.176-182
• /
• 2006

Although several artificial disc designs have been developed for the treatment of discogenic low back pain, biomechanical changes with its implantation were rarely studied. To evaluate the effect of artificial disc implantation on the biomechanics of functional spinal unit, a nonlinear three-dimensional finite element model of L4-L5 was developed with 1-mm CT scan data. Biomechanical analysis was performed for two different types of artificial disc having constrained and unconstrained instant center of rotation(ICR), ProDisc and SB Charite III model. The implanted model predictions were compared with that of intact model. Angular motion of vertebral body, forces on the spinal ligaments and facet joint, and stress distribution of vertebral endplate for flexion-extension, lateral bending, and axial rotation with a compressive preload of 400N were compared. The implanted model showed increased flexion-extension range of motion compared to that of intact model. Under 6Nm moment, the range of motion were 140%, 170% and 200% of intact in SB Charite III model and 133%, 137%, and 138% in ProDisc model. The increased stress distribution on vertebral endplate for implanted cases could be able to explain the heterotopic ossification around vertebral body in clinical observation. As a result of this study, it is obvious that implanted segment with artificial disc suffers from increased motion and stress that can result in accelerated degenerated change of surrounding structure. Unconstrained ICR model showed increased in motion but less stress in the implanted segment than constrained model.

• The Journal of Korean Physical Therapy
• /
• 제12권3호
• /
• pp.455-467
• /
• 2000

The purpose of this study was to analyse the effects of disc degeneration on the biomechanical behaviors of the intervertebral disc in term of axial displacement, intradiscal pressure. disc bulge at the 1.4-1.5 functional spinal unit(FSU). The degeneration is divided 4 grade by initial intradiscal pressure: normal: 135kPa. mild: 107kPa. moderate: 47kPa, severe: 15kPa, The predicted results were follows: 1. The magnitude of the bulge is found to be maximum at the anterior, minimum at the postero-lateral portion. The bulge of lateral, postero-lateral is found to be maximum in severe grade. followed by moderate. mild, normal grade. 2. Tho displacement was increased with increasing compressive load in all four grades.'rho stiffness of disc was found to be reduced by progressing from normal to severe grade. 3. The intradiscal pressure was increased nearly linearly with increasing compressive load in normal and mild grade. But the increasing rate in moderate and severe grade was showed apparently different from nomal and mild grade. Specially, it was increased very slightly in severe grade. In conclusion, decreased intradiscal pressure resulted in increase of axial displacement and disc bulge with compressive load increasing. these may compromise the nerve root impingement or irritation. Therefore posture and activities must be focus to reduce compressive load applied on the back or disc.

• 대한수학회보
• /
• 제34권1호
• /
• pp.29-34
• /
• 1997

Let $U = {z \in C : $\mid$z$\mid$ < 1}$ be the open unit disc in the complex plane and let N be the class of all analytic functions p in U with p(0) = 1.