• Clean Technology
• /
• v.21 no.4
• /
• pp.271-277
• /
• 2015

A photocatalyst which mixed by the commercialized P25-TiO₂ and a synthesized Ag_xO was used in an appropriate weight ratio to effectively produce hydrogen gas in this study. The Ag_xOs were synthesized with the conventional sol-gel method, and tetramethylammonium hydroxides were added at the synthesis process in order to stabilize the solutions, and then the solutions were heat-treated at the temperatures of -5, 25, and 50 ℃, resulted to obtain the three types of silver oxides. Physicochemical properties of the synthesized Ag_xOs were identified through X-ray diffraction analysis (XRD), scanning emission microscopy (SEM), ultraviolet-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS). In the photolysis results of water/methanol (weight ratio 1:1) solution, the mixture of P25-TiO₂/Ag_xO exhibited a significantly higher hydrogen gases evolution, compared to that of pure P25-TiO₂. Additionally, the addition of H₂O₂ as an supplement oxidant and in Ag_xO synthesized at 50 ℃ improved the hydrogen production efficiency. In particular, the emitted hydrogen gases reached to 13,000 μmol during 8 hours when a mixed catalyst, Ag_xO of 0.1 g and P25-TiO₂ of 0.9 g, were used.

• Korean Journal of Materials Research
• /
• v.30 no.8
• /
• pp.383-392
• /
• 2020

In this paper, AgCl/Ag₃PO₄/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag₃PO₄/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag₃PO₄/diatomite composite under visible light are evaluated. In the AgCl/Ag₃PO₄/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag₃PO₄/diatomite remains at 95 % of the original level, much higher than that of pure Ag₃PO₄ (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag₃PO₄/diatomite composites can be attributed to the synergistic effect of Ag₃PO₄, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO₂ and H₂O. Even more remarkably, AgCl/Ag₃PO₄/diatomite can maintain above 95 % photo-degradation activity after five cycles.

• Journal of the Korean earth science society
• /
• v.24 no.3
• /
• pp.216-233
• /
• 2003

This study delineates the phenomena related with global environmental changes such as global warming, ozone depletion, and El Ni${\tilde{n}}$o/Southern Oscillation (ENSO) noted in the Antarctic. Retreat of ice cliffs, glaciers, and calving of ice shelves indicate the effects of recently aggravated global warming. The ice cliff located at Marian Cove, King George Island, South Shetland Islands off the Antarctic Peninsula has been observed to be retreating faster in the last 7 years than in the previous 38 years since 1956. There are some indications of temperature and precipitation changes associated with ENSO around King Sejong Station. The regression analyses indicate significant trends such as a decrease in the total amount of ozone and an increase in ultraviolet radiation which was seen by a satellite (TOMS-EUV) in September and October which correspond to ozone-hole season over King Sejong Station. Increase of UV radiation due to the ozone depletion in the Antarctic has changed the growth rate of marine organisms. It may also result in changes to the productivity, biomass, and species composition of marine organisms which can affect the whole marine ecosystem. The recent ice-core drilling over Lake Vostok has been reviewed with emphasis on the four cycles of glacial stages over the past 420,000 years. It is time to show more interest in mainland Antarctica through investigations of the coring and vast ice sheet, terrestrial geology, and upper atmospheric sciences in order to understand the past environmental changes and to predict possible changes to the environment in the future.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.167-172
• /
• 2004

In the human skin, vitamin C (L -ascorbic acid) that is well known as the activated materials has effects that is skin anti-aging and wrinkle repair by giving impetus to collagen biosynthesis and anti-oxidation, and that is the sun screen, a wound recovering, inhibition melanogenesis and so on. In spite of its effects, vitamin C has the defects of the skin stimulation and easily oxidized instability by water, air, heat and light. For solving their matters, many investigation is advanced and its results are synthesized the various vitamin C derivatives. And yet they have not solved the unstable property of vitamin C and were still insufficient for the comparing with the effect of the pure vitamin C itself. In this study, in order to prepare vitamin C derivative of being improved the stability and to apply vitamin C effect in the skin, we prepared new vitamin C derivative, phytosphingosine ascorbate, by using phytosphingosine, one of sphingolipids, which have a distinguished skin affinity. Phytosphingosine ascorbate can be prepared as the ionic bond between amine group (-NH$_2$) of phytosphingosine and hydroxy group (-OH) of vitamin C by way of the relatively simple reaction. So the structure and properties of the synthesized phytosphingosine ascorbate was confirmed the use of elemental analysis (C 58.3 : H 9.3 : N 2.8 : O 29.5), MALDI TOF-MS (Mw=492.58), Ultraviolet spectra (268.5nm), lH NMR, FT-IR spectra, thermal analysis (m.p=l54$^{\circ}C$), HPLC and so on. And we could confirm the anti-bacterial and anti-oxidation effects. Based on these results, we could confirm to prepare a new material that was expected of both effects of vitamin C and phytosphingosine and that is improved properties of vitamin C.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1204-1210
• /
• 2014

New control methods are proposed for indoor air quality by removing fine airborne dust-particles. As suspended fine dust-particles contain inorganic dust as well as fine organic bacteria, studies for simultaneous control of these contaminants are required. In this study, photocatalytic disinfection of indoor suspended microorganisms such as E. coli and Bacillus subtilis is performed by three types of photocatalysts with UVA irradiation. The UVA irradiation strength was controlled to the minimum $3{\mu}W/cm^2$, and ZnO, $TiO_2$, and ZnO/Laponite ball were used as the catalysts. The results indicate that E. coli was removed over 80 % after about 2 hours of reaction with UVA and all three types of photocatalysts, whereas only with UVA, around 50 % E. coli removal was obtained. Among the catalysts, ZnO/Laponite composite ball was found to have similar sterilizing capacity to $TiO_2$. However, in case of B. subtilis, which has thick cell wall in its spore state, disinfection was not effective under the low UVA irradiation condition, even with the catalysts. Further studies need to figure out the optimal UVA irradiation ranges as well as photocatalysts doses to control airborne dust, to provide healthy clean air environment.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.33-39
• /
• 1987

In order to study the degradation pattern of propanil in solution, the environmental factors such as temperature, pH and UV irradiation effect on propanil degradation were investigated. The degradation of propanil in solution was more rapid in high temperature than in low. The production amount of DCA was increased in high temperature, and then was decreased in a certain period of time because of conversion to TCAB, but the concentration of TCAB was maintained without more degradation. Propanil was rapidly hydrolyzed in alkaline solution as well as in strong acidic solution. Degradation product, DCA was rapidly produced and condensed to TCAB in strong acidic and alkaline condition. On exposur to ultraviolet light, 90% of original propanil was degraded within 20minutes, 0.3 ppm of DCA was produced in 10 minutes, and maintained the concentration throughout irradiation times.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.103-109
• /
• 2005

UV irradiation leads to distinct changes in skin connective tissue, which is degradation of collagen. Many of these alterations in the extracellular matrix are mediated by matrix metalloproteinases. In this study, to develop a new anti-aging agent, we screened the antioxidant activity of solvent fractions from ethanolic extract of Melothria Heterophylla. Among the four solvent fractions tested, the EtOAc fraction exhibited the highest antioxidant activity. It was investigated the inhibitory effect of the EtOAc fraction on the expression and activity of MMP-1 in UVA-irradiated human dermal fibroblasts. The EtOAc fraction inhibited the activity of MMP-1 in a dose dependent manner with the $IC_{50}$ values of $9{\mu}g/mL$. Also, UVA-induced MMP-1 expression was reduced about $90\%$ by $100{\mu}g/mL$ of the EtOAc fraction but MMP-1 mRNA expression was not inhibited. Therefore, we conclude that the EtOAc fraction significantly inhibits MMP-1 expression at the protein level. From these results, we suggest that the EtOAc fraction from M. heterophylla could be used as a new anti-aging agent for the photo-damaged skin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.151-159
• /
• 2019

Ergothioneine has been known as an excellent antioxidant and a cellular protector against oxidative damage in vivo. In the present study, ergothioneine was demonstrated to possess antioxidant and anti-glycation activities. The radical scavenging activity of ergothioneine enhanced the viability of human dermal fibroblasts (HDFs) exposed to ultraviolet (UV) light. The UVA irradiation increased the proportion of senescence-associated ${\beta}$-galactosidase (SA-${\beta}$-gal) positive cells in comparison with the normal control group. The treatment of UVA-irradiated HDFs with ergothioneine decreased the level of SA-b-gal (by approximately 45% at an ergothioneine concentration of $400{\mu}M$) compared with the UVA-irradiated HDFs. We also found that ergothioneine inhibited production of glyceraldehyde-derived advanced glycation endproducts (AGEs) in a concentration-dependent manner. The ergothioneine educed carboxymethyl-lysine (CML) expression in comparison to the glyoxal treatment. In addition, in the Western blot analysis, treatment of glyoxal-stimulated HDFs with ergothioneine resulted in a dose-dependent decrease in the expression level of the receptor for AGE (RAGE). These results suggest that ergothioneine may have potent anti-aging effects and could be used as a cosmetic material against cellular accumulation of AGEs.

• Journal of Life Science
• /
• v.32 no.5
• /
• pp.331-339
• /
• 2022

Melanin is a pigment produced by melanocytes to protect the skin from external stimuli, mainly ultraviolet (UV) rays. However, abnormal and excessive production of melanin causes hyperpigmentation disorders, such as freckles, age spots, and discoloration. Natural cosmeceuticals are a new trend for treating or preventing hyperpigmentation due to fewer side effects and biocompatibility. In this context, the current study focused on Cnidium japonicum, a halophyte with several uses in folk medicine, to evaluate its potential as a skin-whitening agent. The effect of C. japonicum extract (CJE) on melanin production was analyzed in melanogenesis-stimulated B16F10 melanoma cells. The results showed that CJE successfully inhibited the oxidation of tyrosine and L-DOPA by tyrosinase and subsequently decreased the production of the key enzymes responsible for melanin production: tyrosinase, tyrosinase-related protein-1, and protein-2. This effect was confirmed by decreased intracellular and extracellular melanin levels in B16F10 melanoma cells after CJE treatment. Further experiments to elucidate the action mechanism revealed that CJE treatment suppressed melanin production by inhibiting the activation of glycogen synthase kinase 3 β (GSKβ)/β-catenin and protein kinase A (PKA)/cAMP-response element binding protein (CREB) pathways, which are the upstream activators of melanogenesis. In conclusion, the present study suggests that C. japonicum is a potential natural source of bioactive substances for the development of novel cosmeceuticals that can act against hyperpigmentation.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.65-70
• /
• 2023

Nanoimprint lithography (NIL) has attracted much attention due to its process simplicity, excellent patternability, process scalability, high productivity, and low processing cost for pattern formation. However, the pattern size that can be implemented on metal materials through conventional NIL technologies is generally limited to the micro level. Here, we introduce a novel hard imprint lithography method, extreme-pressure imprint lithography (EPIL), for the direct nano-to-microscale pattern formation on the surfaces of metal substrates with various thicknesses. The EPIL process allows reliable nanoscopic patterning on diverse surfaces, such as polymers, metals, and ceramics, without the use of ultraviolet (UV) light, laser, imprint resist, or electrical pulse. Micro/nano molds fabricated by laser micromachining and conventional photolithography are utilized for the nanopatterning of Al substrates through precise plastic deformation by applying high load or pressure at room temperature. We demonstrate micro/nanoscale pattern formation on the Al substrates with various thicknesses from 20 ㎛ to 100 mm. Moreover, we also show how to obtain controllable pattern structures on the surface of metallic materials via the versatile EPIL technique. We expect that this imprint lithography-based new approach will be applied to other emerging nanofabrication methods for various device applications with complex geometries on the surface of metallic materials.