• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.273-279
• /
• 2020

In this study, conventional solvent extraction (CSE), microwave-assisted extraction (MAE), and ultrasound-assisted extraction (UAE) were compared for the recovery of paclitaxel from biomass. As a result of investigating the effect of the extraction solvent type (acetone, chloroform, ethanol, methanol, methylene chloride), methanol was the most suitable for all extraction methods. In the case of MAE and UAE using methanol, most of the paclitaxel (> 95%) was recovered by only one extraction. The recovery rate of paclitaxel increased with the increase of extraction temperature (25-45 ℃), microwave power (50-150 W), and ultrasonic power (180-380 W) for MAE and UAE. In addition, SEM analysis showed that the biomass surface structure was slightly corrugated in CSE, while in the MAE and UAE, it was very rough and destroyed by strong impact.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.3
• /
• pp.271-279
• /
• 2021

Ultrasound-assisted extraction (UAE) conditions, including extraction time, extraction temperature, and ethanol concentration, were optimized to increase the total flavonoid content (TFC), tyrosinase inhibitory activity (TIA), and collagenase inhibitory activity (CIA) of Spirulina platensis through central composite design (CCD). For the optimization of the three dependent variables, a quadratic regression model was derived from 17 experimental sets for the simultaneous maximization of TFC, TIA, and CIA. The predicted optimal UAE conditions were 44.0 min of extraction time, 82.8℃ of extraction temperature, and 96.0% of ethanol concentration. Under these conditions, 0.93 mg QE/g DM of TFC, 81.9% of CIA, and 92.1% of TIA were predicted. The CCD-based UAE optimization enabled an increase in TFC, CIA, and TIA, thereby confirming that the S. platensis extract can be used in the development of a cosmetic material with skin whitening and anti-wrinkle effects.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.542-547
• /
• 2017

Ultrasound-assisted extraction (UAE) has attracted growing interest, as it is an effective method for the rapid extraction of bioactive compounds from plants with a high extraction efficiency comparable to the conventional extraction. In this study, UAE was used for the extraction of polyphenols from lipid extracted microalgae (Tetraselmis KCTC 12236BP) and the effects of five extraction variables on the total phenolic compounds (TPC) were studied. For the optimization of extraction parameters, particle size, solid-to-liquid (L/S) ratio, ethanol concentration, extraction temperature and extraction time have been examined as independent variables. All variables exhibited the significant effects on the extraction of TPC and extraction temperature showed the most significant effect among five variables. The optimal extraction conditions were the extraction using mixed particle, S/L ratio of 10%, ethanol concentration of 60%, extraction temperature of $100^{\circ}C$ and extraction time of 30 min, which gave the 8.7 mg GAE/g DW for TPC. Compared with conventional hot-water extraction, TPC extraction under UAE was increased by up to 1.8 fold with same extraction condition. This study showed that UAE under low temperature and short extraction time was proven to be an effective extraction process for TPC production from LEA compared to conventional hot-water extraction process.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.660-665
• /
• 2016

The effects of ultrasound-assisted extraction (UAE) on the physicochemical and sensory characteristics of coffee beverage were investigated. Coffee powder (4 g) was soaked into 80 mL distilled water and extracted for 15, 30, 60, 120, 180, 240, or 300 sec at $60^{\circ}C$ in an ultrasonic bath (40 kHz, 300 W). Hot-water extraction (HE) at $80^{\circ}C$ for 300 sec was used as a control. Content of soluble solids in coffee beverage prepared by UAE (60~300 sec) was same or higher than those of HE, however, no significant differences were observed among the four beverages extracted for more than 120 sec. Clarity and browning index of beverage prepared by UAE (15 sec) and by HE were significantly higher and lower, respectively, compared to those of the other. Content of phenolic compounds was lower and higher respectively, in beverage prepared by UAE (15 sec, 30 sec) and UAE (60~300 sec) than by HE. DPPH radical scavenging activity was highest in beverage prepared by UAE (15 sec) and HE. Sensory evaluation showed that color, aroma, taste, and overall acceptability were rated with the best score for beverage prepared by UAE (15 sec) and the worst score for beverage prepared UAE (120~300 sec). Therefore, ultrasound-assisted extraction can be used for improving quality of coffee beverage.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.565-570
• /
• 2018

In this study, the antioxidant was extracted from Broussonetia kazinokii using ultrasound-assisted extraction (UAE) and optimized by using a response surface methodology. The response value of the central composite design model establishes the extraction yield and the DPPH radical scavenging activity. The extraction time and temperature and volume ratio of ethanol/ultrapure water were selected as quantitative factors. When considering both the main and interaction effects, the factor having the greatest influence on the extraction yield and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity was the volume ratio of ethanol/ultrapure water. The results of optimal extraction conditions were the extraction time (19.92 min), volume ratio of ethanol/ultrapure water (54.23%), and ultrasonic irradiation power (557.65 W). We could also obtained expected results of the yield = 38.93 wt% and DPPH radical scavenging activity = 55.33% under these conditions.

• KSBB Journal
• /
• v.23 no.2
• /
• pp.101-108
• /
• 2008

Ultrasound assisted extraction (UAE) process enhancement for food and allied industries are reported in this review. Recently ultrasound system has been used more frequently to extract drugs and natural substances. This modern emulsification, homogenization, particle size reduction and viscosity alteration methodologies require reliable tools that perform on a high level in terms of efficiency and reproducibility. Also, Ultrasound can enhance existing extraction processes and enable new commercial extraction opportunities and processes. Therefore, ultrasound technologies could have a strong presence in the future of the food industry.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.726-733
• /
• 2018

The rice's waste byproduct is known as a rice bran and produced annually about 400,000 to 600,000 tons. Most of the rice bran are used as a livestock feed or waste disposal, and needed to be used to produce high-added substances, such as bioactive materials. In this study, extraction conditions of the ultrasound-assisted extraction (UAE) of the rice bran were optimized using a statistically-based optimization. The influence of extraction variables including the extraction time ($X_1$), extraction temperature ($X_2$) and ethanol concentration ($X_3$) were investigated using the response surface methodology in order to determine optimum extraction conditions which maximize total phenolic compounds (TPC), total flavonoid compounds (TFC) and electron donating abilities (EDA). The optimal UAE from rice bran was achieved under the extraction temperature of $94.9^{\circ}C$, extraction time of 41.6 minute and ethanol concentration of 74.0% (v/v) with maximum yields of TPC 2.78 mg GAE/g DM, TFC 1.63 mg QE/g DM and EDA 42.86%. The UAE process shows its potential to the extraction of bioactive and antioxidant compounds from rice bran in a short extraction time and low temperature. Also, it is proposed that rice bran could be considered as food additives and cosmeceutical products.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.388-397
• /
• 2011

The purpose of this study was to determine the optimum ethanol extraction conditions for maximum extraction of functional components such as ferulic acid, oryzanol, and toopherol from black rice bran using Response Surface Methodology (RSM). A central composite design was applied to investigate the effects of the independent variables of solvent ratio ($X_{1}$), extraction temperature ($X_{2}$) and extraction time ($X_{3}$) on the dependent variables such as total phenol components ($Y_{1}$), total flavonoids compounds ($Y_{2}$), electron donating ability ($Y_{3}$), $\gamma$-oryzanol ($Y_{4}$), ferulic acid ($Y_{5}$) and $\alpha$-toopherol components ($Y_{6}$). ANOVA results showed that coefficients of determination (R-square) of estimated models for dependent variables ranged from 0.8939 to 0.9470. It was found that solvent ratio and extraction temperature were the main effective factors in this extraction proess. Particularly, the extraction efficiency of ferulic acid, $\gamma$-oryzanol and $\alpha$-toopherol components were significantly affected by extraction temperature. As a result, optimum extraction conditions were 20.35 mL/g of solvent ratio, 79.4$^{\circ}C$ of extraction temperature and 2.88 hr of extraction time. Predicted values at the optimized conditions were acceptable when compared with experimental values.