• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.35-37
• /
• 1997

The jumper devices of overhead transmission lines are getting increased in size with the adaptation of higher voltage and bundled conductor. Incensement of jumper devices size caused to large swing angle and flashover with tower post or arm. The suspension I type string type jumper devices are used for swing restraint of suspension type. This paper is compared and analysized to its swing characteristics. The results showed that suspension I string type has a good effects.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.249-267
• /
• 1995

The purpose of this study is to analyze breast shape by age, to classify breast types and then to suggest brassiere size chart. The subject of anthropometric measurement were 232 women in 20's and 40's. The direct anthropmetric measurement were analyzed by mean, standard deviation, duncan test, T-test, ANOVA, factor & cluster analysis The results are as follows; 1) as a result of analysis for the measurements, according to the increase of age, the items of height were decreased and the items of width, depth, cir- cumference, length were increased, being obesity and breast points were dropped. So the volume and bottom area of 40's women's breast were lager than 20's women's. The width of breast points was bide by increasing of intereior. 2) as a result of factor analyxis, 5 factors were extracted as important factor of breast shapes(obesity of breast and location of breast point, breast height and volume, upper dimensions of breast/lower dimensions of breast, interior dimensions of breast/exterior dimensions of breast, volume of the lower part and drop of breast) 3) as a reslut of cluster analysis, the breast shape were classified into 4 types. namely, typel has the smallest volume, bottom area of breast and the slenderest breast, type2 was the second obesity type. type3 was middle sized type. type4 has much dropped, wide bottom area of breast and the biggest form. 4) To establish brassiere sizing system, the loss funtion was used to decide interval of under bust girth and cup size of size chart. 20 brassiere sizes were established and the size chart covers 92.2% of all subject.

• Journal of the Korean Home Economics Association
• /
• v.41 no.8
• /
• pp.201-212
• /
• 2003

This study aims to improve the comfort and fit of womens swimsuits. Based on the results of the survey, trial suits were designed. In terms of the breast cap, there are five variations based on the feature, size, and thickness and two variations according to the connection mode of the cap. Total 17 trial swimsuits were made, ease of movement and wearing comfort were evaluated. The results of this study were as follows: 1. In terms of movement according to the type of breast cap, the round type shelved much less movement than the triangular type at the lower part of the cap. According to size, the cap that was manufactured on the basis of brassiere cup size showed much less movement than the ordinary cap size in the same round type of cap. In terms of the connection mode between breast caps and swimsuits, there was less cap movement when they were connected by power nets compared to the ordinary models which were connected by conventional rope. 2. Analysis of the differences in wearing comfort. The round type proved to be more convenient than the triangular type at the lower circumference of the caps, the power net collection was rated more positively by the respondents.

• Journal of the Korean Home Economics Association
• /
• v.49 no.5
• /
• pp.1-10
• /
• 2011

To provide the basic data to manufacture superior brassiere, this study was analyzed the evaluation of wear sensation of brassiere and the satisfaction of breast type by breast circumference and volume of 182 twenties-aged women. The results were as follows: First, it was reliable to set up the cup size of brassiere by using the breast circumference. Hemispherical breast was the same as cone-shaped breast in breast classification by breast circumference and volume. Second, the breast sizes were able to classify into under 200cc, 200~300cc, 300~400cc, and over 400cc by volume, but measuring the volume was more difficult than measuring the breast circumference. Last, there were correlations between breast circumference and breast volume by breast type. And there were differences on improvement, brassiere size, and the satisfaction of breast type by breast circumference and volume. This results will give basic informations for brassiere design that reflects breast type according to breast circumference and volume for functional brassiere.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.743-753
• /
• 2001

This paper proposed the sizing system for womens lower clothes. The sizing system was classified according to 4 body types and 5 age groups. The size intervals of waist girth, hip girth, stature, and slacks length were 3cm, 4cm, 8cm, and 5cm respectively. Frequency distribution analyzed with waist girth, hip girth, and stature showed that the most frequent sizes were 86-100-158 in the fattest-medium length H type, 77-92-158 in the fat-short M type, 68-92-158 in the balanced-long A type, and 65-88-158 in the balanced-medium length A type. The number of the sizes for lower clothes, which had frequencies more than 4∼5%, was 33 and each size was presented with slacks length, skirt length, thigh girth, and knee girth. Also frequency distribution analyzed with waist girth, hip girth, and slacks length showed that the most frequent sizes were 86-100-90 in the fattest-medium length H type, 74-96-90 in the fat-short M type, 68-92-90 in the balanced-long A type, and 65-88-90 in the balanced-medium length A type. The sizing system classified by age group had 21 cases in the early twenties, 21 cases in the late twenties, 18 cases in the early thirties, 16 cases in the late thirties, and 8 cases in the forties. This result will contribute to clothing fitness and efficient production.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.8
• /
• pp.1233-1241
• /
• 2010

This study analyzes the body characteristics of high school boys according to 3 different body types in order to improve the fit of upper garments. First, among the lateral body types, the straight body type was selected from the SizeKorea 3D scanned data and 2D measurement data. Second, high school boys (classified as straight lateral body type) were grouped into type B, A, and Y drop groups. The percentages of type B, type A, type Y are 17.8%, 48.1%, 32.1% respectively. The characteristics of the body types were analyzed. While the bust circumference were the same among the three body types (chest width, back width, back across shoulder, and bust width did not show a significant difference); however, waist and hip measurements showed a significant difference among the three body types. Third, the height of the high school boys ranged between 165cm and 180cm and the bust circumference between 85cm and 97cm. For the bust size categories, type B and type Y are distributed similarly; however, type A is distributed in the smaller bust size categories.

• The Research Journal of the Costume Culture
• /
• v.30 no.5
• /
• pp.675-688
• /
• 2022

The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men's clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, "a normal body type with an oval cross-sectional shape" (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a "cylindrical thick body shape" (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, "a body shape with broad shoulders and developed chest parts" (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

• Journal of the Korean Home Economics Association
• /
• v.43 no.9 s.211
• /
• pp.175-191
• /
• 2005

This paper proposed a sizig system for men's jackets in order to improve the clothing fitness and rain the productivity. The sizing system was classified according to 3 age groups. Figure types were categorized by shoulder angle and body shape. The size interval of the basic dimensions was established at regular intervals centering around their means. Altogether, 15 size charts were developed based on the frequency distribution. Size designating measurements for jackets were height, chest girth and waist girth. Size intervals were 3cm for chest and waist girth, 5m for height, and 2cm for waist and hip girth. Considering the cover factor, charts with a limited number of sizes were suggested with necessary measurements for each figure type of each age group.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.619-622
• /
• 2005

Purpose of this study is to investigate the size-dependent mechanical properties in micron scale medium. Theories such as the couple stress theory and strain gradient theory explain that the deformation in the micron scale is dependent upon the size of the medium. Specimens of the cantilever type, bridge type and paddle type beam that have thickness of 900, 1000 and 1200 nm and width of 10, 20, 30 and $50{\mu}m$ were fabricated by the MEMS technique. We carried out the bending and torsion test to measure the mechanical properties such as the young's modulus, yield strength and torsional rigidity using the AFM(Atomic Force Microscopy).

• Advances in materials Research
• /
• v.8 no.3
• /
• pp.219-235
• /
• 2019

This research is devoted to analyzing mechanical-thermal post-buckling behavior of a micro-size beam reinforced with graphene platelets (GPLs) based on geometric imperfection effects. Graphene platelets have three types of dispersion within the structure including uniform-type, linear-type and nonlinear-type. The micro-size beam is considered to be perfect (ideal) or imperfect. Buckling mode shape of the micro-size beam has been assumed as geometric imperfection. Modified couple stress theory has been used for describing scale-dependent character of the beam having micro dimension. Via an analytical procedure, post-buckling path of the micro-size beam has been derived. It will be demonstrated that nonlinear buckling characteristics of the micro-size beam are dependent on geometric imperfection amplitude, thermal loading, graphene distribution and couple stress effects.