• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.71-81
• /
• 2014

In this paper, the performance variations of tri-gate FinFET are analyzed for different fin shapes and source/drain epitaxy types using a 3D device simulator(Sentaurus). If the fin shape changes from a rectangular shape to a triangular shape, the threshold voltage increases due to a non-uniform potential distribution, the off-current decreases by 72.23%, and the gate capacitance decreases by 16.01%. In order to analyze the device performance change from the structural change of the source/drain epitaxy, we compared the grown on the fin (grown-on-fin) structure and grown after the fin etch (etched-fin) structure. 3-stage ring oscillator was simulated using Sentaurus mixed-mode, and the energy-delay products are derived for the different fin and source/drain shapes. The FinFET device with triangular-shaped fin with etched-fin source/drain type shows the minimum the ring oscillator delay and energy-delay product.

• YAKHAK HOEJI
• /
• v.34 no.5
• /
• pp.348-364
• /
• 1990

The activities of twenty-one flavonoids and their related compounds on the hypersensitivity reaction against various antigens were studied in vitro and in vivo. 1. Generally flavonoids inhibited significantly the homologous passive cutaneous anaphylaxis (PCA) induced by reaginic antibody as compared as anaphylaxis by compound 48/80-induced mast cell degranulation, and so more strongly active in the IgE-mediated anaphylaxis than non-IgE-mediated anaphylaxis. 2. Flavonids inhibited remarkably Arths reaction, hemolysin titer, delayed hypersensitivity, haemagglutinin titer, rosette forming cells and plague forming cells against sheep red blood cells, and so it exhibited that flavonoids inhibited type 2, 3 and 4 hypersensitivity. 3. Quercetin, kaempferol, hesperetin, disodium cromoglycate, malvin and baicalein were active dose-dependently in the all types of hypersensitivity. Fisetin, daidzein, morin, narigin, flavone, catechin, rutin, hesperidin, neophsperidin, apigenin and chrysin were significantly active in the various types of hypersensitivity, but apigenin, rutin and catechin were less active in the delayed hypersensitivity. Taxifolin was significantly active in PCA and histamine-induced anaphylaxis except other types of hypersensitivity. Rotenone and cyanin also inhibited all types of hypersensitivity, but they are toxic. 4. Based on these results from hypersensitivity, the following flavonoid structure-activity relationships became apparent. 1) Flavonoids with $C_{2-3}$ double bond in C-ring were more active than that of $C_{2-3}$ saturation. 2) Flavonoids with $C_4$ ketone group in C-ring were more active than abscence of them except catechin and malvin. 3) Flavonoids with benzene ring at positions 2 or 3 in C-ring exhibited same activities. 4) Flavonoids with opening of the C-ring does not abolish their activities. 5) The glycosylated flavonoids in position 3 or 7 was less active than their aglycone. 6) Flavonoids with the more hydroxy group in A and B-ring were more active. 7) Flavonoids with or without $C_3-OH$ did not change their activities.

• ETRI Journal
• /
• v.46 no.2
• /
• pp.218-226
• /
• 2024

This paper presents a novel circular fractal ring monopole antenna for ultra-wideband (UWB) hardware with dual band-notched properties. The proposed antenna consists of four crescent-shaped nested rings, a tapered feeding line at the front of the dielectric material, and a semicircular ground plane on the backside. In this design, the nested rings are used both as a radiation element and a band rejection element. The proposed antenna has a bandwidth of 9.03 GHz, which works efficiently in the range of 2.63 GHz-11.66 GHz with the dual notched bands of Worldwide Interoperability for Microwave Access (WiMAX) at 3.15 GHz-3.66 GHz and wireless local area network (WLAN) at 4.9 GHz-5.9 GHz, respectively. The antenna has a compact size of 20 mm × 30 mm × 1 mm (0.177 × 0.265 × 0.0084 λ0) and is implemented using a flame-retardant type 4 (FR4) material. It has a maximum gain of approximately 4 dB in its operating range, and experimental results support the simulation predictions with high accuracy. The findings of this study imply that the designed antenna can be utilized in UWB applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.475-485
• /
• 2010

This paper proposes a novel concept for a microstrip resonator that can function as a filter and as an antenna at the same time. The proposed structure consists of an outer ring, an open loop-type inner ring, a circular patch, and three ports. The frequencies where the proposed structure works as a filter and as an antenna, respectively, are determined primarily by the radius of the inner ring and the circular patch. The measured results show that, when the microstrip resonator operates as a filtering device, this filter has about 15.1 % bandwidth at the center frequency of 0.63 GHz and a minimum insertion loss of 1.5 dB within passband. There are three transmission zeros at 0.52 GHz, 1.14 GHz, and 2.22 GHz. In the upper stopband, cross coupling - taking place at the stub of the outer ring - and the open loop-type inner ring produce one transmission zero each. The circular patch generates the dual-mode property of the filter and another transmission zero, whose location can be easily adjusted by altering the size of the circular patch. The proposed structure works as an antenna at 2.7 GHz, showing a gain of 3.8 dBi. Compared to a conventional patch antenna, the proposed structure has a similar antenna gain. At the resonant frequencies of the filter and the antenna, high isolation(less than -25 dB) between the filter port and the antenna port can be obtained.

• Journal of applied mathematics & informatics
• /
• v.32 no.3_4
• /
• pp.529-537
• /
• 2014

The paper introduces a new product of polynomials defined over a field. It is a generalization of the ordinary product with inner polynomial getting non-overlapping segments obtained by multiplying with coefficients and variable with expanding powers. It has been called 'Ordered Power Product' (OPP). Considering two rings of polynomials $R_m[x]=F[x]modulox^m-1$ and $R_n[x]=F[x]modulox^n-1$, over a field F, the paper then considers the newly introduced product of the two polynomial rings. Properties and algebraic structure of the product of two rings of polynomials are studied and it is shown to be a ring. Using the new type of product of polynomials, we define a new product of two cyclic codes and devise a method of getting a cyclic code from the 'ordered power product' of two cyclic codes. Conditions for the OPP of the generators polynomials of component codes, giving a cyclic code are examined. It is shown that OPP cyclic code so obtained is more efficient than the one that can be obtained by Kronecker type of product of the same component codes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.10
• /
• pp.1175-1180
• /
• 2014

In this paper, the open ring type DGS(Defected Ground Structure) resonator, applicable to MMIC(Monolithic Microwave Integrated Circuit), is proposed to improve phase noise characteristics of RF oscillator. This resonator is planar type, therefore, it easy to design miniaturrized., and takes relatively high Q value. Modeling the equivalent parameter of resonator is needed, when designing the RF oscillator with resonator. The mathematical method to solve the equivalent parameter of the resonator from the measured results of resonator is introduced in this paper. To verify the method, DGS resonator with 5.8 GHz center frequency is fabricated, for measuring characteristics and calculating the equivalent parameter. The result from this process is compared with the data of the ADS simulation, and as a result both were identical.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.8
• /
• pp.27-35
• /
• 1999

A radius of ring resonator is determined by the resonant frequency. Resonant frequencies of resonators with the circumference which is integer times of wave length are not same the expected. In this paper, we suggest the design method of a ring resonator with coupling gap, which has the resonant frequency of desire. The equation which can make reduction of the radius of the resonators depending on the gap space is derived by the method of transmission line analysis. The criterion is suggested to determine the radius of the resonator in accordance with relative permittivity. A ring resonator by the proposed method is as small as one-third of basic ring in size and it has the resonant frequency of desire. T-type coupling line is designed to obtain large attenuation of $S_{11}$ at pass-band. These coupling line capacitances are very lower than the gap capacitances, it does not affect the resonant frequency.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.378-381
• /
• 2014

A new pathogen was isolated from zoysiagrass-planted park of Jeju island in 2014. Symptoms appeared a type of irregular patches occurring brownish leaf blight, followed by stem and crown rot. The symptom was very similar to that of large patch caused by Rhizoctonia solani, a well-known devastating zoysiagrass disease. The isolate showed thin orange-colored mycelia and screlotia were formed on the medium based on cultural characteristics. The causal agent of the disease was finally identified as Waitea circinata by analysis of ribosomal DNA. On the inoculation test, Waitea circinatae showed strong pathogenicity to the zoysiagrass. The mycelia were obviously observed in the inoculated tissues. This is the first report of Waitea ring patch caused by Waitea circinata on zoysiagrass.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.107-110
• /
• 1997

We generated a diffraction free beam from Nd:YAG laser with an NBUR (negative branch unstable ring) resonator. The field inside the resonator had a plane wavefront and a homogeneous intensity distribution and the output beam through a scraper mirror of an annular type was used as a source. The outpur beam had an inner radius of 2.5 mm and an outer radius of 5 mm. In this experiment, we used a Fourier transformation lens with the focal length of 5 m to observe the far-field pattern. The lens was placed at a distance of the focal length from the scraper mirror and we found that the beam did not show any noticable diffraction over the distance of 13 m from the lens.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.197-211
• /
• 2020

Application of the steel ring as a type of seismic fuse has been one of the efforts made by researchers in recent years aiming to enhance the ductility of the bracing systems which in turn, possesses various advantages and disadvantages. Accordingly, to alleviate these disadvantages, an innovative bracing system with a diamond scheme equipped with a steel ring is introduced in this paper. In this system, the braces and yielding circular damper act in parallel whose main functionality is to increase ductility, energy absorption and mitigate drawbacks of the existing bracing systems, in which the braces and yielding circular damper act in parallel. To conduct the experimental tests, specimens with three types of rigid, semi-rigid and pinned connections were built and subjected to cyclic loading so that their performance could be analyzed. Promisingly, the results indicate both great applicability and efficiency of the proposed system in energy absorption and ductility. Moreover, it was concluded that as the braces and damper are in parallel, the use of a steel ring with smaller size and thickness would result in higher energy absorption and load-resisting capacity when compared to the other existing systems. Finally, to assess the potential of numerically modeling the proposed system, its finite element model was simulated by ABAQUS software and observed that there is a great agreement between the numerical and experimental results.