• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.535-543
• /
• 1997

In order to compare the accuracy of impression technique using the addition silicone putty and improved heavy body material, impression were taken for the natural 6 maxillary anterior teeth, and for the metal mast model that has full arch shape with 4 cylindrical abutment teeth. Marginal gingiva was retracted by routine method using retraction cord, and two techniques were tried to compare the length of impression materials in the gingival sulcus. This was aimed to see the effect of viscosity and hydraulic pressure of impression materials for the subgingival impression. Impressions for the full arch-shaped metal master model were taken to compare the linear stability of the different impression materials and their related techniques. The conclusions were as belows : 1. The one-step impression technique showed longer extension of impression material in gingival sulcus than two-step impression technique. 2. High viscosity and hydraulic pressure of impression material were useful to take subgingival impression. 3. There was no statistically significant difference for the two-dimensional accuracy of impression technique, but two-step technique showed better trend than one-step technique.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.317-336
• /
• 2011

A time domain finite element based method is employed to analyze wave radiation by multiple cylinders. The nonlinear free surface and body surface boundary conditions are satisfied based on the perturbation method up to the second order. The first- and second-order velocity potential problems at each time step are solved through a finite element method (FEM). The matrix equation of the FEM is solved through an iteration and the initial solution is obtained from the result at the previous time step. The three-dimensional (3D) mesh required is generated based on a two-dimensional (2D) hybrid mesh on a horizontal plane and its extension in the vertical direction. The hybrid mesh is generated by combining an unstructured grid away from cylinders and two structured grids near the cylinder and the artificial boundary, respectively. The fluid velocity on the free surface and the cylinder surface are calculated by using a differential method. Results for various configurations including two-cylinder and four-cylinder cases are provided to show the mutual influence due to cylinders on the first and second waves and forces.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.1-5
• /
• 2008

The output voltage value of AC high voltage source has been usually obtained by multiplying low voltage value measured at both terminals of low voltage resistor by the dividing ratio of the high voltage capacitive divider. From the dividing ratio determined of each 200 kV capacitive divider, we have developed step-up method for measuring the output voltage up to 400 kV using two same type of 200 kV capacitive dividers connected in series. The theoretical dividing ratio of 400 kV capacitive dividers connected in series coincides with that of manufacturer's certification within measurement uncertainty. Thus, this developed step-up method makes it possible to extend the range of output voltage from 200 kV to 400 kV. Furthermore, The dividing ratio of divider under test obtained using this step-up method is consistent with that obtained using one 200 kV high voltage divider within corresponding uncertainties.

• 대한토목학회논문집
• /
• 제32권1A호
• /
• pp.11-18
• /
• 2012

이 논문에서는 유리-에폭시 섬유 보강 복합재료판에 $K_I$ 과 $K_{II}$ 에 의한 혼합모우드 상태의 균열된 알루미늄판의 응력확대계수의 수치해석 산정을 다루고 있다. 응력확대계수 산정을 위한 가상균열닫힘법과 2단계 확장법이 고려된다. 에너지 방출률과 응력확대계수의 항으로 표현되는 파괴역학 매개변수 계산을 위하여, p-수렴 부분 층별모델이 채택된다. 고려되는 p-수렴 방식은 저매개변수 요소의 개념에 기초한다. 1개 층에 대해 가정된 변위장, 변위-변형률 관계, 그리고 3차원 구성방정식은 2차원과 1차원 고차 형상함수의 조합으로 정의된다. 고려되는 요소는 변위장의 보간과 수치적분을 수행하기 위해 로바토 형상함수와 가우스-로바토 적분법이 사용된다. 언급된 모델과 기법들을 사용하여, 경사각도의 변화에 따른 적층판 형상의 효과와 접착제의 강도가 팻치보강 시스템에 미치는 영향이 조사된다. 중립축 변화에 따른 팻치보강 적층판의 면외 휨 효과도 분석된다. 고려되는 모델의 정확성과 단순성 등에 관해서 응력확대계수, 응력분포, 자유도 수, 에너지 방출률 등의 항목을 가지고서 평가된다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.66-69
• /
• 1998

Most segmented polyurethanes are prepared from a two-step method where the polyol is end-capped with an excess of diisocyanate, followed by chain extension with stoichiometric amount of chain extender, In the final polymer the hard and soft segments tend to segregate, due to thermodynamic immiscibility and the differences in chemical structure between hard and soft segments, and produce a phase separated morphology of hard segment-rich and soft segment-rich phase. (omitted)

• 응용통계연구
• /
• 제24권2호
• /
• pp.227-237
• /
• 2011

This paper considers a generalized method of moments(GMM) estimation for seasonal cointegration as the extension of Kleibergen (1999). We propose two iterative methods for the estimation according to whether parameters in the model are simultaneously estimated or not. It is shown that the GMM estimator coincides in form to a maximum likelihood estimator or a feasible two-step estimator. In addition, we derive its asymptotic distribution that takes the same form as that in Ahn and Reinsel (1994).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.474-479
• /
• 2004

According to our previous study, it is confirmed that the Petrov-Galerkin natural element method (PGNEM) completely resolves the numerical integration inaccuracy in the conventional Bubnov-Galerkin natural element method (BG-NEM). This paper is an extension of PG-NEM to two-dimensional nonlinear dynamic problem. For the analysis, a constant average acceleration method and a linearized total Lagrangian formulation is introduced with the PG-NEM. At every time step, the grid points are updated and the shape functions are reproduced from the relocated nodal distribution. This process enables the PG-NEM to provide more accurate and robust approximations. The representative numerical experiments performed by the test Fortran program, and the numerical results confirmed that the PG-NEM effectively and accurately approximates the nonlinear dynamic problem.

• 식물병연구
• /
• 제23권1호
• /
• pp.65-68
• /
• 2017

2단계의 nested PCR 방법을 이용하여 보리 및 벼 재배 토양에서 Barley yellow mosaic virus (BaYMV)를 검출하였다. BaYMV 분절 RNA1 외피단백질 영역의 특이 프라이머로 1차 PCR을 하고 내부서열로부터 작성된 프라이머로 2차 PCR을 실시하여 확보된 372 bp의 PCR 산물이 BaYMV 외피단백질 영역과 98%-100% 염기서열이 일치하여 BaYMV를 검출할 수 있음을 확인하였다. 이 결과는 토양으로부터 BaYMV 검출에 관한 최초의 보고이며 토양전염성 바이러스의 정확한 진단과 예찰에 적용될 수 있을 것으로 생각한다.

• Structural Engineering and Mechanics
• /
• 제42권2호
• /
• pp.131-152
• /
• 2012

In-plane free vibrations of circular beams with stepped cross-sections are investigated by using the exact analytical solution. The axial extension, transverse shear deformation and rotatory inertia effects are taken into account. The stepped arch is divided into a number of arches with constant cross-sections. The exact solution of the governing equations is obtained by the initial value method. Several examples of arches with different step ratios, different locations of the steps, boundary conditions, opening angles and slenderness ratios for the first few modes are presented to illustrate the validity and accuracy of the method. The effects of the geometric parameters on the natural frequencies are investigated in details. Several examples in the literature are solved and the results are given in tables. The agreement of the results is good for all examples considered. The mode transition phenomenon is also observed for the stepped arches. Some examples are solved also numerically by using the commercial finite element program ANSYS.

• 한국전산구조공학회논문집
• /
• 제18권2호
• /
• pp.123-131
• /
• 2005

기존의 부브노프-갤러킨 자연요소법(BG-NEM)에서 발생하는 수치적분의 부정확성을 페트로프-갤러킨 자연요소법(PG-NEM)에서 완벽히 해결할 수 있음을 저자들의 이전 논문에서 확인하였다. 본 논문에서는 PG-NEM을 확장하여 2차원 기하학적 비선형 문제를 다룬다. 해석을 위해 선형화된 토탈 라그랑지 정식화를 도입하고 PG-NEM을 적용하여 근사화한다. 각 하중 단계마다 절점은 새로운 위치로 갱신되며, 재분포된 절점을 바탕으로 형상함수를 새롭게 구성한다. 이러한 과정은 PG-NEM이 더 정확하고 안정적인 근사함수를 제공하는 것을 가능하게 한다. 개발된 포트란 시험 프로그램을 이용하여 대표적인 수치 예제를 수행하였으며, 수치결과로부터 PG-NEM이 효율적이고 정확하게 대변형 문제를 근사화하는 것을 확인하였다.