• Wind and Structures
• /
• 제6권6호
• /
• pp.451-470
• /
• 2003

The classical two-degree-of-freedom (2-d-o-f) "sectional model" is of common use to study the dynamics of suspension bridges. It takes into account the first pair of vertical and torsional modes of the bridge and describes well global oscillations caused by wind actions on the deck, yielding very useful information on the overall behaviour and the aerodynamic and aeroelastic response; however, it does not consider relative oscillations between main cables and deck. On the contrary, the 4-d-o-f model described in the two Parts of this paper includes longitudinal deformability of the hangers (assumed linear elastic in tension and unable to react in compression) and thus allows to take into account not only global oscillations, but also relative oscillations between main cables and deck. In particular, when the hangers go slack, large nonlinear oscillations are possible; if the hangers remain taut, the oscillations remain small and essentially linear: the latter behaviour has been the specific object of Part I (Sepe and Augusti 2001), while the present Part II investigates the nonlinear behaviour (coexisting large and/or small amplitude oscillations) under harmonic actions on the cables and/or on the deck, such as might be generated by vortex shedding. Because of the discontinuities and strong nonlinearity of the governing equations, the response has been investigated numerically. The results obtained for sample values of mechanical and forcing parameters seems to confirm that relative oscillations cannot a priori be excluded for very long span bridges under wind-induced loads, and they can stimulate a discussion on the actual possibility of such phenomena.

• 한국경영과학회지
• /
• 제29권4호
• /
• pp.175-187
• /
• 2004

We consider the simultaneous selection of part routes for multiple part types in Flexible Manufacturing Systems (FMSs). Using an optimization framework we investigate two alternative route assignment policies. The one, called routing mix policy in the literature, specifies the optimal proportion of each part type to be produced along its alternative routes, assuming that the proportions can be kept during execution. The other one, which we propose and call pallet allocation policy, partitions the pallets assigned to each part type among the routes. The optimization framework used is a nonlinear programming superimposed on a closed queueing network model of an FMS which produces multiple part types with distinct repeated visits to certain workstations. The objective is to maximize the weighted throughput. Our study shows that the simultaneous use of multiple routes leads to reduced bottleneck utilization, improved workload balance, and a significant increase in the FMS's weighted throughput, without any additional capital investments. Based on numerical work, we also conjecture that pallet allocation policy is more robust than routing mix policy, operationally easier to implement, and may yield higher revenues.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1417-1424
• /
• 2010

To provide more safe road and better travelling service for Expressway customer, we minimize settlement of bridge backfill and properly repair the occurred settlement. So, we devide this study to two parts one is construction part and the other is management part, in construction part we remove settlement occuring elements and in management part we grasp proper repair time, and then we produce general settlement management program. In construction part, for the purpose of developing construction method of reducing settlement, we developed construction method models and they are composed of abutment back section alteration and backfill material alteration by literature reviews and site investigation of backfill settlement. And then, we carried out laboratory model test and full size field test of some developed models.

• 전기학회논문지
• /
• 제61권5호
• /
• pp.744-752
• /
• 2012

In this study, the Polynomial-based Radial Basis Function Neural Networks is proposed as an one of the recognition part of overall face recognition system that consists of two parts such as the preprocessing part and recognition part. The design methodology and procedure of the proposed pRBFNNs are presented to obtain the solution to high-dimensional pattern recognition problems. In data preprocessing part, Principal Component Analysis(PCA) which is generally used in face recognition, which is useful to express some classes using reduction, since it is effective to maintain the rate of recognition and to reduce the amount of data at the same time. However, because of there of the whole face image, it can not guarantee the detection rate about the change of viewpoint and whole image. Thus, to compensate for the defects, Linear Discriminant Analysis(LDA) is used to enhance the separation of different classes. In this paper, we combine the PCA&LDA algorithm and design the optimized pRBFNNs for recognition module. The proposed pRBFNNs architecture consists of three functional modules such as the condition part, the conclusion part, and the inference part as fuzzy rules formed in 'If-then' format. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of pRBFNNs is represented as two kinds of polynomials such as constant, and linear. The coefficients of connection weight identified with back-propagation using gradient descent method. The output of the pRBFNNs model is obtained by fuzzy inference method in the inference part of fuzzy rules. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to face image(ex Yale, AT&T) datasets and then demonstrated from the viewpoint of the output performance and recognition rate.

• 한국정보처리학회논문지
• /
• 제5권6호
• /
• pp.1575-1582
• /
• 1998

본 논문에서는 멀티에이전트 환경상에서 에이전트 그룹들이 문제 풀이 과정이 변화할 때 적절한 협력대상을 선택하여 문제 해결 능력을 증가 시킬 수 있도록 협력 모델을 설계하고 평가 하였다. 그룹간 협력의 방향과 범위를 결정하기 위해 그룹 이익함수를 사용하였고 그룹을 협력 관련 부분과 비 관련 부분으로 분리 운영하였다. 이렇게 상황에 따라 재구성되는 그룹들을 그룹 수준에서 운영하기 위해 기존의 자료와 목표(goal)가 아닌 그룹의도(group intention)를 제어 기준으로 사용하였다. 이로 인해 그룹들은 먼저 그룹의도를 결정하고 그룹의도의 범위 안에서 현 상황에 적절한 전략을 선택하는 계층적인 제어가 가능하게 되었다. 이상의 제안들은 추적게임 테스트베드에 적용하여 실험/평가 되었다.

• 산업공학
• /
• 제11권2호
• /
• pp.211-225
• /
• 1998

As mentioned in Part I all groupware products have been categorized into three areas which include cooperation/document management systems(CMS), collaborative writing systems(CWS), and decision-making/meeting system(DMS). This study deals with a comparative analysis of the last two areas, which is added to the first. It turns out that DMS has a higher market share than CWS. However. since effective collaboration requires the functions inherent to these two systems. they should be integrated somehow. The systems' functions that have been implemented in response to design issues have been described. Each group of the functions has been divided into three parts which consist of basic function, quasi-basic function. and others. Such a decision has been made according to the frequency rate of the functions provided in the products. While the basic functions in CWS include collaboraive writing beyond restriction of time and place, group awareness. version control. and others, in DMS realtime collaboration. brainstorming. presentation. various task support. policy formation. document management, multimedia, subgroup communication. topic commenter, categorizer, screen capture and various rile transfer. The basic functions are merged into the integrated functional model which was proposed in Part I. Since the model is so flexible that it can partially include the quasi-functions in addition to the hasic functions. a large number of products may stem from the modification of the functional model.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.31-38
• /
• 2008

본 논문은 헬리콥터 기동비행문제를 비선형 최적제어기법으로 정식화 하고 이를 indirect method를 적용하여 해석하는 기법에 대한 연구결과이다. 주어진 기동비행 경로에 대한 오차를 벌칙함수 형태의 가격함수로 채택하고 이를 최소화하도록 정식화하면 기동비행은 구속조건이 없는 최적제어문제로 정식화 된다. 정식화 결과로 얻어지는 이점 경계값 문제는 Multiple Shooting Method (MSM)를 적용하여 해석하였다. 본 논문은 high fidelity 헬리콥터 모델링을 적용할 경우 수치해의 불안정성과 과도한 계산시간에 따른 해석의 어려움을 해소하는 방안을 찾는데 초점을 두고 있다. 이를 위해 2가지의 선형모델과 로터의 비선형 모델링을 포함한 2개의 비선형 모델을 정의하였다. 각 모델링 방법의 적용에 따른 수치해석결과를 상대적인 계산시간과 함수계산 횟수 등을 비교하여 헬리콥터 모델 선정 시 활용할 수 있도록 하였다.

• 정보처리학회논문지D
• /
• 제14D권2호
• /
• pp.181-190
• /
• 2007

컴포넌트 기반 개발은 시스템을 이해하고 분석하기 위한 컴포넌트 모델링 방법이 중요한 부분을 차지하고 재사용성을 높이는 방안으로써 받아들여지고 있다. 컴포넌트는 일반적으로 컴포넌트를 개발하는 사람과 그것을 조립하여 사용하는 사람의 관점이 다르며 이에 따른 내용과 목적이 다르기 때문에 대규모의 컴포넌트 시스템을 개발하는데 있어서 그 역할에 따라 두 가지 유형으로 구분하는 것이 중요하다. 이것이 현실화 되기 위해서는 명확한 컴포넌트와 인터페이스 명제가 필요하며 조립자와 개발자 간의 서로 다른 관점에서의 컴포넌트 모델이 필요하다. 이에 본 논문에서는 조립자 관점과 생성자 관점이라는 서로 다른 역할에 따라 두 가지 유형의 컴포넌트 모델을 제안하며 이를 위해 UML을 확장한다. 또한 제안한 모델을 작성, 관리하며 모델간의 자동변환을 위한 툴을 개발하여 적용해 봄으로써 그 효율성을 검증한다.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.111-120
• /
• 1998

This paper is the first one of two-parted research efforts focusing on the modeling of rubber pad forming process. The rubber pad, driven by the pressurized fluid during the forming process, pushes the sheet metal to solid tool half and forms a part to final shape. In this part of the paper, a numerical procedure for the FE analysis of the rubber pad deformation is presented. The developed three-dimensional FE model is based on the total Lagrangian description of rubber maerial characterized by nearly incompressible hyper-elastic behavior under a large deformation assumption. Validity of the model as well as effects of different algorithms corresponding to incompresibility constraints and time integration methods on numerical solution responses are also demonstrated.

• 대한산업공학회지
• /
• 제17권1호
• /
• pp.83-94
• /
• 1991

This study is concerned with the scheduling problem for mixed-model assembly lines in Just-In-Time(JIT) production systems. The most important goal of the scheduling for the mixed-model assembly line in JIT production systems is to keep a constant rate of usage for every part used by the systems. In this study, we develop two heuristic algorithms able to keep a constant rate of usage for every part used by the systems in the single-level and the multi-level. In the single-level, the new algorithm generates sequence schedule by backward tracking and prevents the destruction of sequence schedule which is the weakest point of Miltenburg's algorithms. The new algorithm gives better results in total variations than the Miltenburg's algorithms. In the multi-level, the new algorithm extends the concept of the single-level algorithm and shows more efficient results in total variations than Miltenburg and Sinnamon's algorithms.