• Kyungpook Mathematical Journal
• /
• 제48권2호
• /
• pp.241-254
• /
• 2008

We define the crosscap number of a 2-component link as the minimum of the first Betti numbers of connected, non-orientable surfaces bounding the link. We discuss some properties of the crosscap numbers of 2-component links.

• Kyungpook Mathematical Journal
• /
• 제46권4호
• /
• pp.509-525
• /
• 2006

We give formulas for the first four coefficient polynomials of the Kauffman's link polynomial involving linking numbers and the coefficient polynomials of the Kauffman polynomials of the one- and two-component sublinks. We use mainly the Dubrovnik polynomial, a version of the Kauffman polynomial.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1351-1365
• /
• 2019

This paper proposes two modified Z-source inverter topologies, namely an embedded L-Z-source inverter (EL-ZSI) and a coupled inductor L-Z source inverter (CL-ZSI). The proposed topologies offer a high voltage gain with a reduced passive component count and reduction in source current ripple when compared to conventional ZSI topologies. Additionally, they prevent overshoot in the dc-link voltage by suppressing heavy inrush currents. This feature reduces the transition time to reach the peak value of the dc-link voltage, and reduces the risk of component failure and overrating due to the inrush current. EL-ZSI and CL-ZSI possess all of the inherent advantages of the conventional L-ZSI topology while eliminating its drawbacks. To verify the effectiveness of the proposed topologies, MATLAB/Simulink models and scaled down laboratory prototypes were constructed. Experiments were performed at a low shoot through duty ratio of 0.1 and a modulation index as high as 0.9 to obtain a peak dc-link voltage of 53 V. This paper demonstrates the superiority of the proposed topologies over conventional ZSI topologies through a detailed comparative analysis. Moreover, experimental results verify that the proposed topologies would be advantageous for renewable energy source applications since they provide voltage gain enhancement, inrush current, dc-link voltage overshoot suppression and a reduction of the peak to peak source current ripple.

• Kyungpook Mathematical Journal
• /
• 제60권4호
• /
• pp.831-837
• /
• 2020

Let M be the exterior of a hyperbolic link K ∪ L in a homology 3-sphere Y, such that the linking number lk(K, L) is non-zero. In this note we prove that if γ is a slope in ∂N(L) such that the manifold ML(γ) obtained by γ-Dehn filling along ∂N(L) contains a Klein bottle, then there is a bound on Δ(μ, γ), depending on the genus of K and on lk(K, L).

• Journal of Communications and Networks
• /
• 제4권3호
• /
• pp.209-220
• /
• 2002

In this paper, we propose a hierarchical packet scheduling technique to closely approximate a hierarchical extension of the generalized processor sharing model, Hierarchical Generalized Processor Sharing (H-GPS). Our approach is to undertake the tasks of service guarantee and hierarchical link sharing in an independent manner so that each task best serves its own objective. The H-GPS model is decomposed into two separate service components: the guaranteed service component to consistently provide performance guarantees over the entire system, and the excess service component to fairly distribute spare bandwidth according to the hierarchical scheduling rule. For tight and harmonized integration of the two service components into a single packet scheduling algorithm, we introduce two novel concepts of distributed virtual time and service credit, and develop a packet version of H-GPS called Hierarchical Fair Queueing (HFQ). We demonstrate the layerindependent performance of the HFQ algorithm through simulation results.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1316-1323
• /
• 2016

Multilevel inverters (MLIs) have been preferred over conventional two-level inverters due to their inherent properties such as reduced harmonic distortion, lower electromagnetic interference, minimal common mode voltage, ability to synthesize medium/high voltage from low voltage sources, etc. On the other hand, they suffer from an increased number of switching devices, complex gate pulse generation, etc. This paper develops an ingenious symmetrical MLI topology, which consumes lesser component count. The proposed level dependent sources concoction multilevel inverter (LDSCMLI) is basically a multilevel dc link MLI (MLDCMLI), which first synthesizes a stepped dc link voltage using a sources concoction module and then realizes the ac waveform through a conventional H-bridge. Seven level and eleven level versions of the proposed topology are simulated in MATLAB r2010b and prototypes are constructed to validate the performance. The proposed topology requires lesser components compared to recent component reduced MLI topologies and the classical topologies. In addition, it requires fewer carrier signals and gate driver circuits.

• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.535-540
• /
• 2022

DC-link capacitors are reliability-critical components in a photovoltaic (PV) inverter. Typically, the lifetime of a DC-link capacitor is evaluated by considering the voltage and hot-spot temperature of the capacitor under the specific operating condition of the PV inverter. However, the output of the PV inverter is determined by solar irradiation and ambient temperature, which vary with the seasons; accordingly, the hot-spot temperature of the capacitor also changes. Therefore, the mission profile of the PV system should be considered to effectively evaluate the reliability of the DC-link capacitor. In this study, the reliability of the DC-link capacitor of a three-level NPC inverter is comparatively analyzed with and without considering the mission profiles of the PV system, where two mission profiles recorded in Arizona and Iza are considered. The accumulated damage of the DC-link capacitor is calculated based on the lifetime model by analyzing its thermal loading. Afterward, a reliability evaluation of the DC-link capacitor is performed at the component level and then at the system level by considering all capacitors by means of Monte Carlo analysis. Results reveal the importance of performing a mission-profile-based reliability evaluation during the design of high-reliability PV inverters to achieve the target reliability performance.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2335-2343
• /
• 2018

This paper proposes an optimal damping control algorithm of the DTI (Direct Two-level Inverter) to miniaturize and reduce the weight of auxiliary power supply for railway vehicles. The conventional auxiliary power supply for railway vehicles uses a DC-DC converter to maintain the inverter input power from the line voltage smoothly. The proposed topology does not use a DC-DC converter for reducing of manufacturing and maintenance costs. It also proposes a DTI topology removed damping resistors that generate ground signal noise in a certain period. At this time, a resonance phenomenon of DC-link voltage occurs due to variation of the inductive load, and a method of controlling the resonance phenomenon of DC-link voltage is required. In order to suppress the resonance phenomenon of the DC-link voltage, at a point before resonance occurs, this paper introduces an algorithm to suppress the resonance phenomenon of DC-link voltage by compensating the resonance component of the q axis voltage of the synchronous reference frame. The proposed algorithm verifies the effect through simulation and experiment.

• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.799-809
• /
• 2002

In order to utilize a parallel mechanism as a machine tool component, it is important to estimate the errors of its end-effector due to the uncertainties in parts. This study proposes an error analysis for a new parallel device, a cubic parallel mechanism. For the parallel device, we consider two kinds of errors. One is a static error due to link stiffness and the other is a dynamic error due to clearances in the parts. In this study, we propose a stiffness model for the cubic parallel mechanism under the assumption that the link stiffness is a linear function of the link length. Also, from the fact that the errors of u-joints and spherical joints are changed with the direction of force acting on the link, they are regarded as a part of link errors, and then the error model is derived using forward kinematics. Lastly, both the error models are integrated into the total error, which is analyzed with a test example that the platform moves along a circular path. This analysis can be used in predicting the accuracy of other parallel devices.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권2호
• /
• pp.83-90
• /
• 2010

해양파 중에서 2개 선체가 가까운 거리에 계류되어있는 경우에 2선체의 운동을 엄밀한 파 중 2 부유체 운동이론에 의하여 계산하였다. 2 선체의 방사 및 산란파 포텐셜은 특이파 수 현상이 없는 주파수영역 Improved Green 적분방 정식으로부터 구하였다. 규칙파 중에서 근접한 2선체가 서로 연결되지 않은 경우와 강체 연결장치로 병렬 계류된 된 경우의 운동 및 강체연결체에 작용하는 6방향 힘과 모오멘트를 해석하는 기법과 수치실험 결과도 보였다.