• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.169-172
• /
• 2008

We attempted to fabricate carbon nanotube field effect transistor (CNT-FET) using single walled carbon nanotube(SWNT) on the heavily doped Si substrate used as a bottom gate, source and drain electrode were fabricated bye-beam lithography on the 500 nm thick $SiO_2$ gate dielectric layer. We investigated electrical and physical properties of this CNT-FET using Scanning Probe Microscope(SPM) and conventional method based on tungsten probe tip technique. The gate length of CNT-FET was 600 nm and the diameter of identified SWNT was about 4 nm. We could observed gating effect and typical p-MOS property from the obtained $V_G-I_{DS}$ curve. The threshold voltage of CNT-FET is about -4.6V and transconductance is 47 nS. In the physical aspect, we could identified SWNT with phase mode of SPM which detecting phase shift by force gradient between cantilever tip and sample surface.

• 한국가스학회지
• /
• 제16권6호
• /
• pp.143-147
• /
• 2012

티타니아($TiO_2$) 나노분말의 우수한 광촉매 활성은 이를 친환경 소재로서 많은 주목을 받도록 하였다. 특히, 최근 들어 이러한 $TiO_2$의 광촉매 활성을 향상시키기 위하여 $TiO_2$ 나노분말에 금속 혹은 비금속 원소를 도핑하는 방법이 널리 시도되고 있다. 화염법, 화학기상합성법, 졸-젤법, 공침법, 이온 주입법 등 다양한 방법들이 사용되고 있으며 합성법에 따라 원소들의 도핑 거동이 달라지므로 $TiO_2$의 전자구조 및 표면성질들이 합성법의 영향을 받게 되며 광촉매 활성 역시 달라진다. $TiO_2$의 광촉매 활성은 합성법 자체에 영향을 받는 것 외에 후속의 열처리에 의해서도 달라질 수 있다. 본 연구에서는 우수한 광촉매 활성을 가진 $TiO_2$ 나노분말 소재를 제조하기 위하여 화학기상합성법(chemical vapor synthesis, CVS)으로 텅스텐(W) 원소가 도핑된 $TiO_2$ 나노분말을 제조하고 물성 및 광촉매 특성을 조사하였다. 일부의 $TiO_2$ 나노분말은 $300^{\circ}C{\sim}700^{\circ}C$ 범위에서 열처리한 후 물성 및 광촉매 특성의 변화를 조사하였다.

• 대한기계학회논문집A
• /
• 제38권12호
• /
• pp.1325-1333
• /
• 2014

Near miss 방식 대응체의 충격자 분산 패턴은 위협체의 무력화에 큰 영향을 미친다. 본 연구에서는 near miss 방식 대응체의 원통형 텅스텐 충격자가 폭발에 의하여 분산될 경우 그 패턴을 수치해석적으로 분석하였다. 폭약의 질량과 형상을 충격자의 분산 패턴에 영향을 미치는 인자로 고려하였으며 두 가지 형상 모델 즉, 상부와 하부가 동일한 두께를 갖는 평행 형상과 상부 및 하부 두께가 각기 다른 테이퍼 형상으로 설정하였다. 해석 결과, 분산된 충격자는 임의 공간의 2 차원 평면상에서 고리 모양을 형성하였으며 폭약 형태가 동일한 경우 폭약 질량이 증가함에 따라 화망 면적은 증가하고, 아울러 테이퍼 형상 폭약의 경우, 평행 형상의 폭약에 비해 큰 화망 면적이 형성됨을 확인하였다. 화망 면적과 충격자 분산 밀도 평가를 바탕으로 near miss 방식 대응체의 충격자 분산 패턴 제어를 위해서는 물리적 특성, 즉 폭약의 질량뿐 만 아니라 형상 또한 주요 설계 요소가 됨을 알 수 있었다.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.321-325
• /
• 2020

The present study demonstrates the effect of magnetic pulse compaction and spark plasma sintering on the microstructure and mechanical property of a sintered W body. The relative density of green specimens prepared by magnetic pulse compaction increases with increase in applied pressure, but when the applied pressure is 3.4 GPa or more, some cracks in the specimen are observed. The pressureless-sintered W shows neck growth between W particles, but there are still many pores. The sintered body fabricated by spark plasma sintering exhibits a relative density of above 90 %, and the specimen sintered at 1,600 ℃ after magnetic pulse compaction shows the highest density, with a relative density of 93.6 %. Compared to the specimen for which the W powder is directly sintered, the specimen sintered after magnetic pulse compaction shows a smaller crystal grain size, which is explained by the reduced W particle size and microstructure homogenization during the magnetic pulse compaction process. Sintering at 1,600 ℃ led to the largest Vickers hardness value, but the value is slightly lower than that of the conventional W sintered body, which is attributed mainly to the increased grain size and low sintering density.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.133-138
• /
• 2017

We evaluated the structural, electrical and optical properties of tungsten (W)-doped $Ge_8Sb_2Te_{11}$ thin films. In a previous work, GeSbTe alloys were doped with different materials in an attempt to improve thermal stability. 200 mm thick $Ge_8Sb_2Te_{11}$ and W-doped $Ge_8Sb_2Te_{11}$ films were deposited on p-type Si (100) and glass substrates using a magnetron co-sputtering system at room temperature. The fabricated films were annealed in a furnace in the $0{\sim}400^{\circ}C$ temperature range. The structural properties were analyzed using X-ray diffraction (X'pert PRO, Phillips). The results showed increased crystallization temperature ($T_c$) leading to thermal stability in the amorphous state. The optical properties were analyzed using an UV-Vis-IR spectrophotometer (Shimadzu, U-3501, range : 300~3,000 nm). The results showed an increase in the crystalline material optical energy band gap ($E_{op}$) and an increase in the $E_{op}$ difference (${\Delta}E_{op}$). This is a good effect to reduce memory device noise. The electrical properties were analyzed using a 4-point probe (CNT-series). This showed increased sheet resistance ($R_s$), which reduces programming current in the memory device.

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6952-6957
• /
• 2014

광촉매 반응에서 $TiO_2$에 금속물질을 첨가하면 촉매표면이 변화되며, 이러한 금속물질은 광분해반응의 속도를 증가시킨다. 본 연구에서는 $TiO_2$ 광촉매의 광분해능력을 향상시키기 위해 다양한 방법을 이용하여 개질하였으며, 개질된 광촉매의 광분해특성은 회분식 광반응기를 이용하여 조사하였다. 우수한 $TiO_2$ 광촉매용액을 얻기 위해 여러 종류의 분산제와 안정제를 조사하였으며, 분산제로는 isoproply alcohol, 안정제로는 sodium silicate가 적합하였다. 톨루엔 분해반응을 향상시키기 위해 다양한 금속물질을 $TiO_2$ 광촉매에 첨가하여 광분해효율을 조사한 결과 Pd가 가장 우수하였으며, Cu와 W도 우수하였다. Pd를 첨가한 경우 25%의 제거효율 향상이 있었다. 그러나 Fe의 경우 광촉매분해반응을 상당히 저해하는 것으로 나타났다. $Pd/TiO_2$ 광촉매에 Cu 또는 W를 부가적으로 첨가하여도 촉매의 광분해효율에는 증가가 없었다.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.181-186
• /
• 2015

In this study, the effect of the friction stir welding (FSW) was compared with that of the gas tungsten arc welding (GTAW) on the microstructure and microhardness of Cu-Ni alloy weldment. The weldment of 10 mm thickness was fabricated by FSW and GTAW, respectively. Both weldments were compared with each other by optical microstructure, microhardness test and grain size measurement. Results of this study suggest that the microhardness decreased from the base metal (BM) to the heat affected zone (HAZ) and increased at fusion zone (FZ) of GTAW and stir zone (SZ) of FSW. the minimum Hv value of both weldment was obtained at HAZ, respectively, which represents the softening zone, whereas Hv value of FSW weldment was little higher than that of GTAW weldment. These phenomena can be explained by the grain size difference between HAZs of each weldment. Grain size was increased at the HAZ during FSW and GTAW. Because FSW is a solid-state joining process obtaining the lower heat-input generated by rotating shoulder than heat generated in the arc of GTAW.

• 한국주조공학회지
• /
• 제37권1호
• /
• pp.21-29
• /
• 2017

The effects of W content and heat treatment on the microstructure and mechanical properties of Hastelloy C-276 alloy investment castings were discussed. As the W content was increased, dendritic microstructure was refined and network type precipitate formed during solidification was distributed on the dendritic grain boundaries. Cr, Fe and Mn were highly segregated in the Ni-based dendrite matrix, and Mo, W, C and Si were in the precipitates. Due to the heat treatment, fine granular and flake precipitates were newly formed in the matrix, and unresolved network type precipitates remained on the grain boundary. The network type precipitates and the granular and flake precipitates formed by heat treatment were confirmed to be ${\mu}$ phase intermetallic compounds with similar compositions. Due to the increase of the W content and the heat treatment, hardness and tensile strength were significantly increased. However, tensile strength after aging treatment was decreased with the W content. These results can be explained in that brittle fracturing by the unresolved network type precipitates dispersed in the grain boundary was predominant over ductile fracturing by the dimple ruptures originating from the fine granular precipitates in the matrix.

• 한국의학물리학회지:의학물리
• /
• 제10권1호
• /
• pp.55-62
• /
• 1999

방사선치료에 이용되는 X-선의 특성을 고찰하기 위하여, 몬테칼로 방법을 이용하여 텅스텐 표적에 입사한 6, 10, 15 MeV 의 전자선에 의해 발생되는 X-선의 에너지분포와 평균에너지를 계산하였다. 빔의 반경의 함수로서 계산된 광자의 평균에너지는 6, 10, 15 MV에 대하여 각각, 1.4-1.6, 2.1-2.5, 2.8-3.3 MeV 범위로서 반경에 크게 의존하지 않고 거의 일정하였다. 표적과의 수직거리 100 cm에서 구해진 6, 10, 15 MV X-선의 에너지분포를 이용하여, 몬테칼로 계산으로 깊이선량율을 계산하였다. 이 중 10 MV에 대한 것을 측정값과 비교하였다. 계산된 10 MV X-선의 깊이선량율은 표면영역을 제외하고 깊이의 증가에 따라 측정값보다 낮게 나타났다. 그 이유는 실제 X-선의 에너지분포에는 편평화여과기에 의한 빔경화효과가 포함되어 있는 반면, 본 연구에서 수행한 몬테칼로 계산결과에는 이 효과가 포함되어 있지 않기 때문으로 생각된다.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.691-696
• /
• 2003

To improve the photocatalyticactivity of $TiO_2$-coated coal fly ash, tungsten hydroxide was doped by impregnation method and was oxidized by heat treatment in temperature ranges of $WO^{\circ}C$ for 2 hrs. The changes of crystal structure and crystal size of $TiO_2$and $WO_3$on coal fly ash were investigated by X-ray diffraction analysis. The crystal structure of titanium dioxide showed only anatase type and $TiO_2$-$WO_3$ compounds appeared in the heat treatment temperature ranges of $500∼600^{\circ}C$. By adding $V_3$in $TiO_2$coated on fly ash, the growth of crystal size of anatase was restrained and the anatase phase was stabilized in temperature ranges of TEX>$500∼<800^{\circ}C$. And $WO_3$acted as a trap site of electrons excited from anatase by irradiating UV. The maximum removal efficiency of NO gas for $TiO_2$/$WO_3$-coated coal fly ash was 84% and appeared when the ammonium tungstate of $1.3${\times}$10^{-3}$ M was doped and then heated at $600^{\circ}C$ for 2 hrs.