• KIEAE Journal
• /
• 제17권3호
• /
• pp.15-21
• /
• 2017

Purpose: "Building energy design standard" is used to limit the thermal transmittance of building in Korea. However, it only covers the insulation standard for each appropriate elements of a building, not the thermal performance of Junction thermal bridge of windows and doors installed in wall. Therefore in this study, we have evaluated the thermal performance of Junction thermal bridge depending on installation method and position of windows and provide it as design data. Method: We analyzed heat transfer of 4-Track sliding window and tilt & turn triple glazed window that are placed in the first class category on window energy efficiency rating using Window 7.4 and Therm 7.4. Result : First, linear thermal transmittance of 4-Track sliding window differs by 2.2 times or more depending of installation method and location. It is higher than the linear thermal transmittance, 0.01W/mK, proposed by Passivhaus. Second, linear thermal transmittance of Tilt & turn triple glazed window differs by 7.7 times or more depending of installation method and location. The average linear thermal transmittance was less than 0.01W /mK when windows were installed on the internal wall insulation by the fixed hardware attachment method. Third, the thermal losses of a window caused by a junction thermal bridge are inversely proportional to the window area and converge gradually as the area increased.

• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.30-34
• /
• 2017

The building integrated photovoltaic system (BIPV) attracts attention with regard to the future of the photovoltaic (PV) industry. It is because one of the promising national and civilian projects in the country. Since land area is limited, there is considerable interest in BIPV systems with a variety of angles and shapes of PV panels. It is therefore expected to be one of the major fields for the PV industry in the future. Since the irradiation is different from each installation angle, the output can be predicted by the angles. This is critical for a PV system to be operated at maximum power and use an efficient design. The development characteristics of tilted angles based on data results obtained via long-term monitoring need to be analyzed. The ratio of the theoretically available and actual outputs is compared with the installation angles of each PV module to provide a suitable PV system for the user.

• 한국해양학회지
• /
• 제19권1호
• /
• pp.94-102
• /
• 1984

東海(Japan Sea)의 起源에 관해서 板構造論(Plate tectonecs)과 海底擴張설 (Se-floor spreading)과 같은 現代地球物理學 理論이 최근에 많이 논의되고 있다. 동해의 기원은 後期白堊期 혹은 Paleocene 시대만큼 일찍이 거슬러 올라가서 일어난 Back-aec spreading의 장력에 기인되었다고 본다. 이 해저확장의 시잔은 동쪽 혹은 남동쪽으로 빠른 운동을 하였지만 서쪽으로는 느린 운동을 하게 되어서 非對稱성 확장을 이루게 되었다. 그러나 Eocene 동안 北北西에서 南北西로 이동 하게 된 태평양판의 새로운 운동방향의 변화와 Philippine 판의 생성 때문에 동해의 확장은 오늘날의 일본 열도에 제한되어 멈추게 되었다고 본다. 第四紀 以後 동해의 확장은 소멸되고, 太平洋板, Pilippine板 및 Eurasia板의 서로 만남 으로 하나의 Triple junction을 형성하여 힘의 평형을 이루고 있는지에 대해서는 충분한 地球物理學, 地質學的 자료는 물론 地震資料의 더욱 정밀한 분석에 기초를 둔 연구가 수행됨으로 풀릴 것이다.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.225-230
• /
• 2020

Recently, with the miniaturization of GIS, there is a need for the miniaturization of spacers as accessories. Miniaturized spacers make it difficult to secure adequate insulation distances, resulting in a more concentrated electric field at the triple junction of high-voltage (HV) conductor-insulator (spacer)-insulation gas (SF₆), which is a weakness in GIS. Therefore, by introducing a new concept design technology, functionally graded material (FGM), which is recently applied to various materials and parts industries, three-dimensional control of the dielectric constant distribution in a spacer can be expected to alleviate triple-junction electric field occupancy and improve insulation performance. In this study, we propose an optimized model using NSGA-II to optimize the permittivity distribution of FGM applied spacer.

• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.412-419
• /
• 2020

In this study, a 70 W buck converter using GaN metal-oxide-semiconductor field-effect transistor (MOSFET) is developed. This converter exhibits over 97 % efficiency, high power density, and 48 V-to-12 V/1.2 V/1 V (triple output). Three gate drivers and six GaN MOSFETs are placed in a 1 ㎠ area to enhance power density and heat dissipation capacity. The theoretical switching and conduction losses of the GaN MOSFETs are calculated. Inductances, capacitances, and resistances for the output filters of the three buck converters are determined to achieve the desired current, voltage ripples, and efficiency. An equivalent circuit model for the thermal analysis of the proposed triple-output buck converter is presented. The junction temperatures of the GaN MOSFETs are estimated using the thermal model. Circuit operation and temperature analysis are evaluated using a circuit simulation tool and the finite element analysis results. An experimental test bed is built to evaluate the proposed design. The estimated switch and heat sink temperatures coincide well with the measured results. The designed buck converter has 130 W/in³ power density and 97.6 % efficiency.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.214-223
• /
• 2013

This paper proposes a theoretical analysis of hidden device detection and a design of multiband circular polarization patch array antenna for non-linear junction detector system application. A good axial ratio of circular polarization patch antenna is realized by a new approach that employs inclined slots, two rectangular grooves and a truncated ground for the conventional antenna. A good axial ratio of the 1.5 dB lower is measured by having an asymmetric gap distance between the ground planes of the coplanar waveguide feeding structure. The common ground plane of the linear array has an optimum trapezoidal slot array to reduce the mutual coupling without increasing the distance between the radiators. The higher gain of about 1 dBi is realized by using the novel common ground structure. The measured return loss, gain, and axial ratio of the proposed single radiator, as well as the proposed array antennas, showed a good agreement with the simulated results.

• 한국통신학회논문지
• /
• 제25권6A호
• /
• pp.818-824
• /
• 2000

단일 또는 2중 금속삽입 필터의 도파관 폭을 축소시켜 차단대역 특성을 개선시키기 위한 연구가 수행되어 왔다. 그러나 이러한 구조의 필터는 도파관의 폭 변화에 의한 삽입손실을 최소화시켜야 하는 설계상의 어려움과 더불어 도파관의 폭을 축소시키는 까다로운 제작상의 문제점이 발생한다. 본 논문에서는 도파관의 폭을 변화시켜 차단대역 특성을 개선시키는 필터의 설계와 제작이 어려우므로 이를 극복하는 방법으로 폭 변화없는 3중 금속삽입 필터의 사용을 제안하고 삽입 금속판 길이의 제작상 오차 0.1mm를 고려한 최적화 설계방법을 사용하여 필터를 설계하고 제작하였다. 제작된 3중 금속삽입 필터의 측정 결과는 13.62 GHz에서 67.5 dB의 삽입손실로 가장 개선된 차단대역 특성으로 설계치와 일치하였다. 그러므로 필터의 최적화 설계에 의한 3중 금속삽입 필터의 제작방법이 차단대역 특성을 개선시키는데 실용적임을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.322.1-322.1
• /
• 2014

Many research groups have studied tandem or multi-junction cells to overcome this low efficiency and degradation. In multi-junction cells, band-gap engineering of each absorb layer is needed to absorb the light at various wavelengths efficiently. Various absorption layers can be formed using multi-junctions, such as hydrogenated amorphous silicon carbide (a-SiC:H), amorphous silicon germanium (a-SiGe:H) and microcrystalline silicon (${\mu}c$-Si:H), etc. Among them, ${\mu}c$-Si:H is the bottom absorber material because it has a low band-gap and does not exhibit light-induced degradation like amorphous silicon. Nevertheless, ${\mu}c$-Si:H requires a much thicker material (>2 mm) to absorb sufficient light due to its smaller light absorption coefficient, highlighting the need for a high growth rate for productivity. ${\mu}c$-SiGe:H has a much higher absorption coefficient than ${\mu}c$-Si:H at the low energy wavelength, meaning that the thickness of the absorption layer can be decreased to less than half that of ${\mu}c$-Si:H. ${\mu}c$-SiGe:H films were prepared using 40 MHz very high frequency PECVD method at 1 Torr. SiH4 and GeH4 were used as a reactive gas and H2 was used as a dilution gas. In this study, the ${\mu}c$-SiGe:H layer for triple solar cells applications was performed to optimize the film properties.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.73-76
• /
• 1997

Nanocrystalline materials have been modeled as a mixture of the crystallite and the grain boundary phases. The mechanical property has been calculated using the rule of mixtures based on the volume fractions. The critical grain size concept suggested by Nieh and Wadsworth and porous material model suggested by Lee and Kim were applied to the calculation. The theoretical results fit very well with the experimental values

• 동굴
• /
• 제5호
• /
• pp.66-69
• /
• 1997

The island of S.Miguel is part of the Azores, an archipelago composed of nine volcanic islands situated between the european and american continents. Aligned in a general WNW -ESE trend, between latitudes 37$^{\circ}$ -40$^{\circ}$ N and longitude 25$^{\circ}$ -31$^{\circ}$ W, the Azores islands show a very special geotectonic setting, at the triple junction of the Eurasian, African and North American lithospheric plates.(omitted)