• 전자공학회논문지
• /
• 제49권12호
• /
• pp.194-200
• /
• 2012

본 논문에서는 SPICE 시뮬레이션을 위한 고전압 insulated gate bipolar transistor(IGBT)의 개선된 모델을 제안하였다. IGBT를 부속 소자인 MOSFET과 BJT의 조합으로 구성하고, 각 소자의 각종 파라미터 값을 조절하여 기본적인 전류-전압 특성과 온도변화에 따른 출력특성의 변화 등을 재현하였다. 그리고 비선형적인 리버스 트랜스퍼 커패시턴스 등의 기생 커패시턴스의 전압에 따른 변화를 높은 정확도로 재현하기 위해, 복수의 접합 다이오드, 이상적인 전압 및 전류 증폭기, 전압제어 저항, 저항과 커패시터 수동소자 등을 추가하였다. 본 회로모델을 1200V급의 트렌치 게이트 IGBT의 모델링에 이용하였으며, 실측자료와 비교하여 통해 모델의 정확도를 검증하였다.

• ETRI Journal
• /
• 제38권4호
• /
• pp.645-653
• /
• 2016

This paper demonstrates the performance of a metal-substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5-kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single-layer heat-sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat-sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi-phase gate driver using an N-ch silicon MOSFET high-side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three-phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권5호
• /
• pp.522-529
• /
• 2013

In this paper, simple but very effective techniques to suppress subthreshold hump effect for high-voltage (HV) complementary metal-oxide-semiconductor (CMOS) technology are presented. Two methods are proposed to suppress subthreshold hump effect using a simple layout modification approach. First, the uniform gate oxide method is based on the concept of an H-shaped gate layout design. Second, the gate work function control method is accomplished by local ion implantation. For our experiments, $0.18{\mu}m$ 20 V class HV CMOS technology is applied for HV MOSFETs fabrication. From the measurements, both proposed methods are very effective for elimination of the inverse narrow width effect (INWE) as well as the subthreshold hump.

• 한국시뮬레이션학회논문지
• /
• 제11권1호
• /
• pp.23-30
• /
• 2002

An STI(Shallow Trench Isolation) by using a CMP(Chemical Mechanical Polishing) process has been one of the key issues in the device isolation[1] In this paper we fabricated N, P-MOSFEET tall analyse hump characteristics in various rounding oxdation thickness(ex : Skip, 500, 800, 1000$\AA$). As a result we found that hump occurred at STI channel edge region by field oxide recess. and boron segregation(early turn on due to boron segregatiorn at channel edge). Therefore we improved that hump occurrence by increased oxidation thickness, and control field oxide recess( 20nm), wet oxidation etch time(19HF,30sec), STI nitride wet cleaning time(99HF, 60sec+P 90min) and fate pre-oxidation cleaning time (U10min+19HF, 60sec) to prevent hump occurring at STI channel edge.

• 전기전자학회논문지
• /
• 제20권2호
• /
• pp.163-166
• /
• 2016

It is important to operate the driving circuit under the optimal condition through precisely sensing the power consumption causing the temperature made mainly by the MOSFET (metal-oxide semiconductor field-effect transistor) when a BLDC (Brushless Direct Current) motor operates. In this letter, a Super-junction (SJ) power TMOSFET (trench metal-oxide semiconductor field-effect transistor) with an ultra-low specific on-resistance of $0.96m{\Omega}{\cdot}cm^2$ under the same break down voltage of 100 V is designed by using of the SILVACO TCAD 2D device simulator, Atlas, while the specific on-resistance of the traditional power MOSFET has tens of $m{\Omega}{\cdot}cm^2$, which makes the higher power consumption. The SPICE simulation for measuring the power distribution of 25 cells for a chip is carried out, in which a unit cell is a SJ Power TMOSFET with resistor arrays. In addition, the power consumption for each unit cell of SJ Power TMOSFET, considering the number, pattern and position of bonding, is computed and the power distribution for an ANSYS model is obtained, and the SJ Power TMOSFET is designed to make the power of the chip distributed uniformly to guarantee it's reliability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1205-1206
• /
• 2008

본 실험에서는 CMOS 공정에서 사용하는 실리콘 트렌치 공정을 이용하여 분절된 트렌치 바디 접촉구조를 형성, 60 V급 전력 MOSFET 소자를 제작하였으며, 결과 소자의 면적을 증가시키지 않고도 제어되지 않은 유도성 스위칭 (UIS) 상황에서 낮은 전도 손실과 높은 항복 에너지 ($E_{AS}$)를 구현하였다. 분절된 트렌치 접촉구조는 소자의 사태 파괴시 n+ 소스 아래의 정공전류를 억제한다. 이는 트렌치 밑 부분에서부터 이온화 충돌이 일어나기 때문이며, 이는 기생 NPN 바이폴라 트랜지스터의 활성화를 억제하여 항복 에너지를 증가시킨다. 기존 소자의 항복 전압은 69.4 V이고 제안된 소자의 항복 전압은 60.4 V로 13% 감소하였지만, 항복 에너지의 경우, 기존소자가 1.84 mJ인데 반하여 제안된 소자는 4.5 mJ로 144 % 증가하였다. 트렌치의 분절 구조는 n+ 소스의 접촉영역을 증가시켜 온 저항을 감소시키며 트렌치 바디 접촉구조와 활성영역의 균일성을 증가시킨다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1406-1407
• /
• 2006

본 논문에서는 기존의 250V급 트렌치 전극형 파워 MOSFET을 구조적으로 개선하여, 600V 이상의 순방향 항복 전압을 갖는 파워 MOSFET을 설계 하였다. 본 논문에서 제안한 구조로 기존의 250V급 트렌치 전극형 파워 MOSFET에 비하여 더욱 높은 순방향 항복 전압을 얻었다. 또한, 기존의 LDMOS 구조로 500V 이상의 항복 전압을 얻기 위해서 $100{\mu}m$ 이상의 크기를 필요로 했던 반면에, 본 논문에서 제안한 소자의 크기(vertical 크기)는 $50{\mu}m$로서, 소자의 소형화 및 고효율화 측면에서 더욱 우수한 특성을 얻었다. 본 논문은 2-D 공정시뮬레이터 및 소자 시뮬레이터를 바탕으로, 트렌치 옥사이드의 두께 및 폭, 에피층의 두께 변화 등의 설계변수와 이온주입 도즈 및 열처리 시간에 따른 공정변수에 대한 시뮬레이션을 수행하여, 본 논문에서 제안한 구조가 타당함을 입증하였다.

• ETRI Journal
• /
• 제35권3호
• /
• pp.425-430
• /
• 2013

In this paper, we propose a triple-gate trench power MOSFET (TGRMOS) that is made through a modified RESURF stepped oxide (RSO) process, that is, the nitride_RSO process. The electrical characteristics of TGRMOSs, such as the blocking voltage ($BV_{DS}$) and on-state current ($I_{D,MAX}$), are strongly dependent on the gate configuration and its bias condition. In the nitride_RSO process, the thick single insulation layer ($SiO_2$) of a conventional RSO power MOSFET is changed to a multilayered insulator ($SiO_2/SiN_x/TEOS$). The inserted $SiN_x$ layer can create the selective etching of the TEOS layer between the gate oxide and poly-Si layers. After additional oxidation and the poly-Si filling processes, the gates are automatically separated into three parts. Moreover, to confirm the variation in the electrical properties of TGRMOSs, such as $BV_{DS}$ and $I_{D,MAX}$, simulation studies are performed on the function of the gate configurations and their bias conditions. $BV_{DS}$ and $I_{D,MAX}$ are controlled from 87 V to 152 V and from 0.14 mA to 0.24 mA at a 15-V gate voltage. This $I_{D,MAX}$ variation indicates the specific on-resistance modulation.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.729-734
• /
• 2000

Recently, Very Large Scale Integrated (VLSI) circuit & deep-submicron bulk Complementary Metal Oxide Semiconductor(CMOS) devices require gate electrode materials such as metal-silicide, Titanium-silicide for gate oxides. Many previous authors have researched the improvement sub-micron gate oxide quality. However, few have reported on the electrical quality and reliability on the ultra thin gate oxide. In this paper, at first, I recommand a novel shallow trench isolation structure to suppress the corner metal-oxide semiconductor field-effect transistor(MOSFET) inherent to shallow trench isolation for sub 0.1${\mu}{\textrm}{m}$ gate oxide. Different from using normal LOCOS technology deep-submicron CMOS devices using novel Shallow Trench Isolation(STI) technology have a unique"inverse narrow-channel effects"-when the channel width of the devices is scaled down, their threshold voltage is shrunk instead of increased as for the contribution of the channel edge current to the total channel current as the channel width is reduced. Secondly, Titanium silicide process clarified that fluorine contamination caused by the gate sidewall etching inhibits the silicidation reaction and accelerates agglomeration. To overcome these problems, a novel Two-step Deposited silicide(TDS) process has been developed. The key point of this process is the deposition and subsequent removal of titanium before silicidation. Based on the research, It is found that novel STI structure by the SEM, in addition to thermally stable silicide process was achieved. We also obtained the decrease threshold voltage value of the channel edge. resulting in the better improvement of the narrow channel effect. low sheet resistance and stress, and high threshold voltage. Besides, sheet resistance and stress value, rms(root mean square) by AFM were observed. On the electrical characteristics, low leakage current and trap density at the Si/SiO$_2$were confirmed by the high threshold voltage sub 0.1${\mu}{\textrm}{m}$ gate oxide.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.427-435
• /
• 2014

Segmented-channel MOSFETs (SegFETs) can achieve both good performance and variation robustness through the use of $HfO_2$ (a high-k material) to create the shallow trench isolation (STI) region and the very shallow trench isolation (VSTI) region in them. SegFETs with both an HTI region and a VSTI region (i.e., the STI region is filled with $HfO_2$, and the VSTI region is filled with $SiO_2$) can meet the device specifications for high-performance (HP) applications, whereas SegFETs with both an STI region and a VHTI region (i.e., the VSTI region is filled with $HfO_2$, and the STI region is filled with $SiO_2$) are best suited to low-standby power applications. AC analysis shows that the total capacitance of the gate ($C_{gg}$) is strongly affected by the materials in the STI and VSTI regions because of the fringing electric-field effect. This implies that the highest $C_{gg}$ value can be obtained in an HTI/VHTI SegFET. Lastly, the three-dimensional TCAD simulation results with three different random variation sources [e.g., line-edge roughness (LER), random dopant fluctuation (RDF), and work-function variation (WFV)] show that there is no significant dependence on the materials used in the STI or VSTI regions, because of the predominance of the WFV.