• 한국응용곤충학회지
• /
• 제34권2호
• /
• pp.106-111
• /
• 1995

파밤나방의 합성 성페로몬 대량유살 트랩을 이용하여 1992년부터 1994년까지 3년간 남부지방을 중심으로 발생소장, 발생량 및 방제 가능성을 검토한 결과 파밤나방 서충은 4월부터 트랩에 유인되기 시작하였으며 6월하순까지는 발생량이 극히 미미하였으나 7월상순부터 발생량이 급격히 증가하여 11월 상순까지 유인되었고 발생최성기느는 7월중순, 8월상순, 9월상순이었다. 년차별 발생량 및 발생면적은 전남지방의 경우 1992년은 1,630마리, 3,979.5ha, 1993년은 218마리, 283.0ha, 1994년은 1,630마리, 4,262.5ha로 그해의 기상에 따라 변이가 컸는데 특히 1993년의 저온과 8월중의 집중 강우는 본종의 발육과 정착에 영향을 끼쳐 발생량과 피해면적이 극히 적었다. 합성 성페로몬 트랩과 유아등에 의한 유인량은 1993년, 1994년 모두 페로몬 트랩이 1.5배, 2.3배 많았다. 비닐하우스 내에서 대량유살 트랩에 의한 방제 가능성은 330$m^2$당 10개이상 처리한 경우에 효과적이었다.

• 한국광학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2006

우리는 6.7 kPa의 네온 버퍼가스가 포함된 루비듐 증기셀을 이용하여 $^{87}Rb$원자 $D_1$ 전이선에서 레이저의 세기, 증기 셀의 온도, 전이 선에 따른 비선형 광자기 신호(NMOE)의 특성을 조사하였다. 비선형 광자기 신호는 레이저의 세기와 증기셀의 온도가 증가함에 따라 F=2$\to$F'=2 전이선에서는 광자기 신호의 크기와 선폭이 증가하였지만, F=2$\to$F'=1 전이선에서는 확대 없이 신호의 크기만 증가됨으로써 자장 측정 민감도가 향상되는 것을 확인하였으며, 이러한 효과를 자기부준위 사이에서의 원자결맞음 구도의 차이로 설명하였다. 관측된 최적 조건에서 자기장변화에 대한 민감도는 $70pT/\sqrt{Hz}$ 이하로 계산되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1482-1484
• /
• 2002

Transparent conductive oxides (TCO) are necessary as front electrode for most thin film solar cell. In our paper, transparent conducting aluminum-doped Zinc oxide films (ZnO:Al) were prepared by rf magnetron sputtering on glass (Corning 1737) substrate as a variation of the deposition condition. After deposition, the smooth ZnO:Al films were etched in diluted HCI (0.5%) to examine the electrical and surface morphology properties as a variation of the time. The most important deposition condition of surface-textured ZnO films by chemical etching is the processing pressure and the substrate temperature. In low pressures (0.9mTorr) and high substrate temperatures $({\leq}300^{\circ}C)$, the surface morphology of films exhibits a more dense and compact film structure with effective light-trapping to apply the silicon thin film solar cells.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.455-460
• /
• 2016

A textured front surface is required in high efficiency silicon solar cells to reduce reflectance and to improve light trapping. Wet etching with alkaline solution is usually applied for mono crystalline silicon solar cells. However, alkali texturing method is not appropriate for multi-crystalline silicon wafers due to grain boundary of random crystallographic orientation. Accordingly, acid texturing method is generally used for multi-crystalline silicon wafers to reduce the surface reflectance. To reduce reflectivity of multi-crystalline silicon wafers, double texturing method with combination of acid and reactive ion etching is an attractive technical solution. In this paper, we have studied to optimize RIE condition by different RF power condition (100, 150, 200, 250, 300 W).

• Corrosion Science and Technology
• /
• 제18권3호
• /
• pp.102-109
• /
• 2019

The hydrogen diffusion and trapping model with a numerical finite difference method (FDM) was modified and extended to accommodate $H_2S$ corrosion and scale forming processes of high-strength steel under tensile stress condition. The newly proposed diffusion model makes it possible to clearly understand combined effect of tensile stress and $H_2S$ corrosion process on hydrogen diffusion behaviors. The core concept of this theoretical approach is that overall diffusion behavior is separated into diffusion process through two respective layers: an outer sulfide scale and an inner steel matrix. Diffusion coefficient values determined by curve-fitting permeation data reported previously with the newly proposed diffusion model indicate that the application of tensile stress can contribute to continual increase in the diffusivity in the sulfide scale with a high density of defect. This suggests that the scale with a lower stability under the stress condition can be a key parameter to enhance hydrogen influx in the steel matrix. Consequently, resistance to hydrogen assisted cracking of the steel under tensile stress can be decreased significantly.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.47-52
• /
• 1999

In recent years, the micro-tribological behavior of silicon has been the topic of much interest. peformance of thin film under light load is important for potential applications in MEMS. In this work under light load and various humidity, the tribological behavior of undulated surface with various width and shape was Investigated. The results show that undulated surface of linear type had good tribological properties abrasive wear occur depending on the sliding condition. Also the effect of humidity on friction and wear was not important if exist undulation. Finally, undulations on HDD were found to be effective in trapping wear particles.

• Journal of Chest Surgery
• /
• 제21권6호
• /
• pp.1095-1098
• /
• 1988

Congenital cystic adenomatoid malformation[CCAM] is a rare disease that cause respiratory distress in the newborn and infants, but is one of the two causes along with lobar emphysema. This malformation has the pathologic characteristics which can be differentiated from other forms of diffuse cystic disease, i.e. CCAM is marked proliferation of the terminal bronchioles and that can enlarge rapidly by air trapping in cystic areas. The CCAM has a clinical importance because of rapid worsening respiratory distress, with tachypnea, subcostal retraction and cyanosis. This is a strict surgical condition and after operation[lobar, segmental resection or pneumonectomy] the symptoms relieved obviously. We experienced 6 cases of CCAM from July, 1980 to September, 1987 at the Department of Cardiovascular and Thoracic Surgery, Severance Hospital, College of Medicine, Yonsei University. The male patients were two and female patients were four. The age distribution was from premature to 10 year old. One of them was 27 weeks gestational premature female who was borne dead. The other 5 patients were performed on thoractomy[1 case pneumonectomy and 5 cases lobectomy]. The postoperative courses were good and no complications were seen.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.411-414
• /
• 1999

70 ${\AA}$-thick oxides nitridied at various conditions were reoxidized at pemperatures of 900$^{\circ}C$ in dry-O$_2$ ambients for 5～40 mininutes. The gate oxide interface porperties as well as the oxide substrate interface properties of MOS(Metal Oxide Semiconductor) capacitors with various nitridation conditions, reoxidation conditions and pure oxidation condition were investigated. We stuided I$\sub$g/-V$\sub$g/ characteristics, $\Delta$V$\sub$g/ shift under constant current stress from electrical characteristics point of view and breakdown voltage from leakage current point of view of MOS capacitors with SiO$_2$, NO, RNO dielectrics. Overall, our experimental results show that reoxidized nitrided oxides show inproved charge trapping porperites, I$\sub$g/-V$\sub$g/ characteristics and gate $\Delta$V$\sub$g/ shift. It has also been shown that reoxidized nitridied oxide's leakage currented voltage is better than pure oxide's or nitrided oxide's from leakage current(1${\mu}$A) point of view.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.91-96
• /
• 1998

In recent years, the tribological behavior of coated ceramic material has been the topic of much interest. Particularly, the understanding of the tribological performance of thin film under light load is important for potential applications in MEMS. In this work under light load and low speed, the tribological behavior of coated silicon was investigated. The results show that both adhesive and abrasive wear occur depending on the sliding condition. Also the effect of humidity on friction was influenced by the apparent ares of contact between the two surfaces. Finally, undulations on the silicon wafer were found to be effective in trapping wear particles.

• Tribology and Lubricants
• /
• 제15권1호
• /
• pp.29-38
• /
• 1999

In recent years, the tribological behavior of coated ceramic material has been the issue of much interest. Particularly, the understanding of the tribological performance of thin film under light load is important for its potential in applications of MEMS. The friction and wear behavior of ceramic material that occur at light load depends on several factors such as surface roughness, contact area and material properties. In this work, the tribological behavior of coated silicon under light load and low speed was investigated. Particularly, the effects of coated materials, humidity and undulated surface were also studied. The results show that the effect of humidity on fiction was influenced by the apparent area of contact between the two surfaces. Also both adhesive and abrasive wear occurred depending on the sliding condition. Finally, undulations on the silicon wafer were found to be effective in trapping wear particles and resulted in the reduction of friction.